Counting matching models…
I had been working on and off with this model and theres still a couple of we tweaks I could have done, but it still looks pretty good thus far. Cheers Jace Please check the sizing suits your needs, if you do print this, Thanks
A cool musical keychain
Un divertido y funcional llavero fidget clicker diseñado en forma de clavel 🌸. Inspirado en la sensación de los interruptores mecánicos de teclado, este llavero te permite llevar siempre contigo un botón para hacer click y liberar estrés…
un llavero del dorito⚠
Simple screw-on cap for Presta/Sclaverand/French type valves. If you like this design, please consider leaving a ♥heart. Thanks! ---------- Update: Added a version with 0.2 mm clearance. If you are unsure, print this one. ----------…
For more information please refer to the Github repo below. https://github.com/thlintw/clavert The default orientation of case STL files are wrong. The case consists of two halves and a battery holder. They should be printed with the…
Assembly for this piece is pretty straight forward. You have clear guides for each of the "filter" pieces to snap in place, and the "eyes" should be inserted into the mask from the back. Use a dab of glue on each piece and you should be…
A musical keychain
Pendiente diseñado en clave de SOL diseñado para amantes de la música. NOTA: Se recomienda imprimir bocabajo para un mejor efecto de la parte frontal del pendiente.
Clean build plate and brim are advised! Also print multiple at once so each layer of each piece has time to solidify before the next one is set on top. Additionally, the color can be swapped at 6.6mm to make the 1x1 brick more…
This is a 95 mm diameter coaster.
Wife's Enclave upper storage compartment latch broke down, I 3D scanned the pieces and recreated in F360. I printed with .4 nozzle at pretty much default settings. I added a handful of small paint-on supports to keep the rails from…
This is the Tire Lever to rule them all. With its compact design it's easy to carry with you. The tool features a spoke lock to allow for hands-free usage with multiple levers and a cutout that fits around a presta valve core to quickly…
My first design after acquiring a 3D printer… Being a chemical engineer, I reckoned that I should model a reactor of sorts and produced this design using Fusion. Although the legs are a bit skinny and the flanges do not match the…
Easy multicolor print, just add in a color change at the appropriate layers. Set on the board alone when peaceful, or cover the suit when angered.
If the Phalanx are the hammer, the Echo Chanters are the needle - slender, sharp, and terrifyingly precise. They are the harriers of the Conclave, specialists in shadow-flitting through your lines to find the exact frequency that makes…
Parte de una partitura de piano de la música clint eastwood de la banda Gorillaz, perfecto para imprimir y pegar sobre disco de vinil. pronto subiré la partitura en clave de fa. Print Settings Printer: wanhao duplicator 12/230 Rafts: No…
Check out my cults3d page, it has a lot more files https://cults3d.com/en/users/ItsTheBot/3d-models
Replacement center console latch for a 2014 era Buick Enclave. Should also fit similar model years and related vehicles like the Chevrolet Traverse and GMC Acadia. Print the model with supports either on its back or on the side as shown…
This is a luer lock style dust cap for use on Multi-Dose Vial Spikes. It is essentially the same as a luer lock syringe but without the center post since multi-use vial spikes are designed to remain sealed when not in use.
This is where you see the Conclave’s true, cold pragmatism. They took a Shard-Bound Mauler - a beast that’s pure, territorial fury - and bolted a brass & crystal harness directly into its nervous system. It’s a crude instrument, a bruiser…
The ' Clavel' ('Carnation' in English) was originally supposed to be a one-off custom I made for myself, but seeing that there are no Smiley frameworks that are even similar I decided to publish it. Warning : This build kinda sucks I did…
Boîtier électrique pour monter un commutateur maître esclave KEMO M103N entre deux prises électriques murales. Les trous de fixation sont prévus pour des vis diamètre 2,5 ou 3 mm, l'idéal étant celles utilisées habituellement dans les…
I’ve seen captains who lead with a shout, but Lissandra leads with a silence that’ll make your ears bleed. She isn't just some geometric curiosity; she’s a slayer of reality itself, hailing from those floating islands where gravity is…
Don't let the name fool you into thinking they’re just standing guard. These Quartz Phalanx are the bruisers of the Peaks, forged from thick, cloudy stone that’s as unyielding as a mountain and twice as heavy. They move with the same…
A simple phone holder that clips to the vents of a 2011 Buick Enclave. Likely fits other years and GM models with similar dash. Designed to fit my iPhone 12 in its case, but will fit any phone/case combo with dimensions less than 78.2 mm…
Bac pour autoclave Dimensions en cms : 7X4 Hauteur : 3 (5 sur les bords pour les poignées) Autoclave tray Dimensions in cms: 7X4 Height: 3 (5 on edges for handles) No PLA, PETG minimum, PC works Best.
É uma pequena luminária, que pode ser alimentada por LEDs difusos ou fita LED, esta em duas partes a base tem espaço suficiente para uma fita led de 10mm de espessura. 2 walls 0,2 layer 10% infill na peça CLAVE, nao usa camadas de topo…
Simple model with 60 mm dimensions we designed to be placed into autoclaves for high temperature sag testing. Our application required us to also examine the impact of saturated heat and pressure. Must print with supports eg tree supports…
A dead simple 1.5x75x144mm* separator for the Mystic Vale Conclave big box. The main goal here is to make it easier to pull out the Conclaves during game setup. When you store them back to back it can be difficult to see where they all…
He adaptado estos Tokens y les he puesto las palabras en castellano para poder jugar tanto al preludio como otras
Quite a few of the W&H Lisa autoclaves are coming onto the surplus market here. You can plumb it in from the back, but for most users it's probably easier to manually fill it from the top and drain dirty water from the front (the left…
Printed in PETG on Prusa i3 mk3 printer with 0.4 mm nozzle. No supports required. A standard 500 ml laboratory glass bottle (see photo) can be snapped into the handle and is retained safely by the flexible tab. I colleague in my lab asked…
TPU Holder for SV-to-AV-Adaptor and 7mm Rail
Pendientes con forma de Clave de Sol, ligeros y rápidos de imprimir.
Quite a few of the W&H Lisa autoclaves are coming onto the surplus market here, but many seem to be missing the top cover where you refill it with water. This is important for keeping dust and debris out of the water tank, and is probably…
Simpla model of a clave. Print two to have claves. Use high or full infill to produce crisp sound.
Diseño de llavero para producto de lavado para autoclaves o esterilizadores Diseño impreso en SLA Estandar, se recomienda por definición de las letras del producto Los colores de definición si fueron hechos a mano
Start making your own music. This generator allows you to create modern, perfectly balanced rhythm claves (percussion sticks). Instead of basic wooden dowels, you can now print them in various modern shapes that fit comfortably in your…
I’ve seen captains who lead with a shout, but Lissandra leads with a silence that’ll make your ears bleed. She isn't just some geometric curiosity; she’s a slayer of reality itself, hailing from those floating islands where gravity is…
Don't let the name fool you into thinking they’re just standing guard. These Quartz Phalanx are the bruisers of the Peaks, forged from thick, cloudy stone that’s as unyielding as a mountain and twice as heavy. They move with the same…
If the Phalanx are the hammer, the Echo Chanters are the needle - slender, sharp, and terrifyingly precise. They are the harriers of the Conclave, specialists in shadow-flitting through your lines to find the exact frequency that makes…
Printed in PETG on Prusa i3 mk3 printer with 0.4 mm nozzle. No supports required. A standard 500 ml laboratory glass bottle (see photo) can be snapped into the handle and is retained safely by the flexible tab. I colleague in my lab asked…
Simple screw-on cap for Presta/Sclaverand/French type valves. If you like this design, please consider leaving a ♥heart. Thanks! ---------- Update: Added a version with 0.2 mm clearance. If you are unsure, print this one. ----------…
I've enjoyed the Fallout game editions over the past years. I came across this helmet and decided to spruce it up a bit. Not sure you could wear it as it still needs some heavy modification to fit you head in it, but it could be possible…
![Customizable rhythm claves [generator]](https://media.printables.com/media/prints/954d87dc-e2bf-4d56-b2f0-8f6586dff583/images/14061531_54ccc61f-359d-47b7-80a5-4afb019ab75d_d4492870-46a6-4881-ba7b-654d4d3b54b4/01.jpg)
