Counting matching models…
D2 Magsafe compatible Tripod and GoPro Mount The convenience and versatility of Magsafe on the iPhone 12’s is great but their aren’t many options for tripods yet. I decided to create a few Mounts to use for photography/videography. These…
Print approx. €1.69–€2.07 excl. taxPreliminary estimate for one variant
My camera’s remote receiver normally mounts on the hotshoe of the camera, which is fine and good unless you also want to mount a flash or flash transmitter. When I’m doing product photography, I usually have the camera tripod mounted and…
Coldshoe splitter to mount up to four ascesoires on top of your camera like my 18650cell mount or my lightning trigger. You might need a dap of superglue to glue in the foot. Top tip, first screw on the nut ;) Print Settings Printer…
AssemblyAid: -For dart cups with a neck diameter of 5mm -For dart shafts with a diameter of 2,5mm Notice: With the assembly aid, the shafts can be glued straight into the cap with superglue! Dart Cup Dimension(mm): Cone_Diameter: 16…
Airwolf - Michael Archangel Coldsmith-Briggs III - 1984-1986 3D printable model.
This shockmount was created to fit the Boya mini shotgun mic. All I had found online was for the Rode mini shotgun mic, so I made one for the Boya. It was inspired in another design for Rode https://www.thingiverse.com/thing:4283728 but…
Magsafe compatible Tripod and GoPro Mount (Ferrite Version) The convenience and versatility of Magsafe on the iPhone 12’s is great but their aren’t many options for tripods yet. I decided to create a few Mounts to use for…
A simple 90 degree cold-shoe adapter for using an external light-meter. To easy the readings on my external light-meter, allowing me to keep the camera on the same orientation.
Adapter to mount Rode VideMic Me to a hotshoe or coldshoe on a DSLR
Hi Simon, This was all I had on file. Hope its what your after and good luck with your project. And rememebr to check the sizing suits your needs. Cheers Jace
It's a remix of the Coldshoe from the attached source that fixes some tolerances. You can tip me on Ko-Fi if you want to support my work.
Ricoh gr3 thumbgrip with cold shoe on top to allow the use of a viewfinder. **The dimensions are made for the gv-1 viewfinder, I haven't tested with other accessories.
This is a single coldshoe mount for the 6x17 camera. I printed it on it's front side and with a brim instead of printing it flat. This way you don't get any clearance problems and won't need supports.
If you want to setup the Ecoflow Wave 2 outside the room, you need an adapter for the inlet of the cold side. The model contains two elements, the Plate (Platte) to mount the adapter to the inlet. This plate should be printed of a more…
This Coldshoe Adapter is designed to mount your coldshoe Accessories to the Hama Traveller Ball 163 Tripod. This Adapter works very well for me needings. Print Settings Printer: Creality Ender 3 v2 Rafts: Doesn't Matter Supports: Yes…
Zoom H1 Coldshoe Shockmount Upgrade your recordings with this shockmount made for the Zoom H1, compatible with coldshoe mounts. It reduces vibrations for crisper sound quality. Download, print, and elevate your audio recordings! More…
I needed a coldshoe mount for the Multifunctional Adjustable Desk Mount , so I took one of the included toolheads, removed the mount, and added a coldshoe. I couldn't figure out a way to print it without supports without modifying the…
Rain cover for light rain - I like to do timelapses and I don't like getting my cameras wet even tho they are weather sealed, I just prefer keeping them dry if possible short variant doesn't really protect the lens unless you use some…
Horseman ER Zoom Viewfinder to coldshoe adapter
This is the simplest and most straightforward microphone adapter for the Canon M6 hot shoe mount. Used the template from the remixed model and the cold shoe, linked together. PLA works well with Rode Videomic Pro. Background - I have…
Nikonos 15mm Ultrawide Viewfinder to coldshoe conversion
A simple addon for the coldsteel Leatherneck S/F [link] training knife to transform it into an inexpensive parry dagger for rapier fencing. This is intended for use with nylon waster/trainer swords, not for impact with steel! Printed from…
DIY boom pole made from a ~2,5cm (1inch?) outside diameter scaffolding (Steigerbuis) aluminum tube. I bought the tube from a local hardware store and designed these inserts to fit seamlessly. The boom pole is very sturdy and looks…
Print this holder in TPU. For use on the phonemount in the picture, to get a coldshoe for your phone + pocket use. Use glue or UV resin to get a coldshoe on the print. Category: Camera
An addon for the coldsteel rondel dagger [link] to transform it into a parry dagger, also called gauche or Parierdolch. There are two versions of tolerance, the one without tolerance marking is ment for TPU, the tolerance marked model is…
An addon for the coldsteel rondel dagger [link] to transform it into a parry dagger, also called gauche or Parierdolch. There are two versions of tolerance, the one without tolerance marking is ment for TPU, the tolerance marked model is…
I have a leftover coldshoe to tripod mount adapter so I made this to mount my 3D Printer Camera. Use with this: https://www.printables.com/model/3407-articulating-raspberry-pi-camera-mount-for-prusa-m
This model holds a gopro HD hero 1 or 2 and an accessory mounted to a coldshoe on the top. It retains access to all ports allowing you to charge, attach a mic, etc without taking the camera out of the cage.
Remixed from that https://www.printables.com/model/888719-coldshoe-90deg-adapter
This is a Hotshoe/Coldshoe Mount for hanging little accessories like flashes or remote triggers to the Skadis board. It uses the T-Clip System by @LineArcLine as it is my preferred method of attaching Skadis accessories. Printed laying on…
Didn't realize that the Atom 500 doesn't come with a coldshoe mount, and I can't justify $20 each to buy them- so here we are. The mount is attached with two 3mm x 6mm screws, and is threaded for a 1/4"x20 standard tripod screw. I grabbed…
The locator tabs on the momentary switch that controlled the water for my fridge were broken, so the switch wasn't in the right spot. I designed this to snap on to the existing framework of the dispenser. If you need it for the ice side,…
Hi it's my first design so please be gentle. I needed an ssd mount for my lumix camera, camera world being expensive I've searched for a simple nvme usb-c adapter (i used this one:…
Simple clip on cold shoe adapter for Bessa II Insert from front and push adapter into place. Push from back to disengage. PLA 0.25mm layer 30% infill - front face to built plate - All supports activated About 35min print on Mini+
This model requires a build volume of at least 220mm X 220mm X 220mm. The print orientation of the ShelfBracketV2_ReadyToPrint.stl file will provide an optimal print strength as the the bracket will be subject to stress, when installed in…
filmspeed reminder for analog film cameras
Nikonos 15mm Ultrawide Viewfinder to coldshoe conversion
Hi it's my first design so please be gentle. I needed an ssd mount for my lumix camera, camera world being expensive I've searched for a simple nvme usb-c adapter (i used this one:…
My 1968 Sears Coldspot Freezer failed to defrost which caused the condenser cover to bulge and pressed against the shelf bracket breaking this ABS plastic part. Highly recommend printing in PETG or ASA as this part will have to survive in…
Englisch: This is an arrow for a bar. Hang it in the desired place with double-sided tape so that everyone knows where the bar is. ------------------------------------------------------------------------ Deutsch: Dies ist ein Pfeil für…
