61 models
The clamp and mic clip compoentants are from two sources that i merged together. I'm trying to find the original builders again to credit them. The clip source can be found here .
Print approx. €2.84–€3.47 excl. taxPreliminary estimate for PETGSource material: PET
Make sure you push in the two triangles close to the short end of the command strip first and tilt down towards the long end to snap into place. Compatable with all the channel models that David D has created. If you have any issues…
Print approx. €0.30–€0.36 excl. taxPreliminary estimate for PETGSource material: PET
This is a case designed for the new AirPods Pro Generation 2 I included three different files. The first one is for flexible filaments only, as it connects the two halves together. The other two files are just the different halves of the…
All credit for the initial design goes to Printin'Monkey . The initial design was a great start, but it didn't work for me 100% and my setup. My Galaxy s24 in a rokform case was too thick so I expanded the cradle to 18mm to accommodate…
Lowered down fan so the heat sock can fit in without pressing against the fan duct (does require some support for a decent print, I recommend using tree supports and using them on baseplate only, this is up to you though) Original:…
Just another poop bag container that works with the Flexi retractable leash's. I've been a big fan of these brand / type leash's for years, they take so much abuse & just keep on working. This design should be wide enough to fit the…
I took the original model and added a mag holder as the other remix had done. This mag holder will fit the gen 5 mags and hold them upright. The other one did not hold the gen 5 mags, and since they are more slanted and dont stand on…
A simple ball joint and insert 3d model that's compatible with Dummy 13. You can use it to create attachable accessories for Dummy 13 or as a joint for something else you're making! It is recommended to print using PETG or something…
This wall hook is compatible with piece 67139 which is used as a hanger bracket by LEGO's line of dot mosaic art sets. Hanger Hook I printed these standing up on their bottom end with a raft just to be on the safe side. This hanger…
please comment what needs improved, hope you like it, maybe enough to post a make or a remix.
Compatable with the real threadboards made by 3d print acadamy launched on kickstarter 0.2 layer height 3 walls 15% infill
This is a Gridfinity bin for holding the portable cable organizer by @squinn
If your like me, you have alot of old pc components lying in a drawer somewhere. why not orginise it with gridfinity.
These are some brick tiles I did for some buildings I made that are made using the Linka plaster moulded tiles. These tiles are compatible with the original Linka tiles in that they are the same dimensions and interlock with the fingers…
After finding TightTieFighterFight's base templates and printing their Cal Kestis saber, I knew I wanted more, and I knew I shouldn't… So I decided to fire up Fusion and whip up a Vader saber! This one is more based on his ESB saber and…
A 3D print designed to be mounted on top of a lazy susan or can be mounted directly to the spinning hardware turning the disk into the spinner. It is primarily designed for Quacks of Quedlinburg but can be used for a variety of different…
Based on the sew-on ‘cat eyes’ on the BDU caps I wore in the service, this MOLLE tag was printed with a phosphorescent ‘glow in the dark’ filament to aid in group identification and control during low light hiking and SAR when attached to…
A set of tech deck ramps modeled off the ones included inside Tech Deck skatepark sets. The colllection includes: 1x1 Quarter pipe vert ramp 1x1 Bank ramp 1x1 Convex ramp 1x1 Wall panel - MORE TO COME- You may find some issues with the…
A collection of accessories that can be used on their own or in combination with Ram Mounts to hold your phone or tablet steady in the car or in the air! All components are designed with a standard 1" ball that works with the Ram…
This version is much more stable.
3DTouch ( https://aliexpi.com/EWr7 ) mount for a Mellow BMG Wind extruder ( https://aliexpi.com/twlM ) Both normal and volcano compatable, for volcano mount your BLTouch from the bottom and from the top for normal E3DV6 (see photos) To…
I had a bunch of filament left over from my Robox Printers and wanted to use it on my Bambu with the AMS. Print two of these on the strong infill setting (25% infill) and they snap right on each side of the Robox reels
I've had 370 sized motors hanging around for ages waiting to be put into a blaster but I never quite found the right one to put them in. Some 370 motors are pretty powerful and would serve as good alternatives to some of the hobby grade…
Leupold VX Freedom 4-12x40 compatible glare shield. Fits snugly, use round elastic to hold it in place by looping around the top turret.
Wanting to give your balls a boost? Introducing the ball kicker for the Hubelino ball system! Note: Tested with 24mm plastic marble and 3D printed Hubelino parts. Any feedback would be appreciated.
To do the model, you must use this link (https://www.thingiverse.com/thing:1200206) to get things started (Recommend printing in gold like I did in the photo). And the frame needs to be black so its fitting!
This special type of slide dips your marble from one height to another in a special way. Thanks to the help of gravity! Any feedback would be appreciated!
This is a LEGO compatible stove for your LEGO creations or mocs, I printed this on a Bambu X1C at the 0.08 layer Hight profile in Bambu Studio, but you might be able to get away with a 0.12 layer Hight (Might be a tight fit) I printed…
I remixed this lovely looking 3-record hanger so I could print it on my wee A1 mini. I have removed the middle rack and boolean merged the top and bottom. Handy if you need a smaller one, but should now fit onto most “mini” build plates…
Created this sandpaper holder for my 3 inch Milwaukee sanders. It holds about 20 disks for each grit. There is an extra space that I created to hold the interface pads and the two hex keys. easily fits in the Milwaukee pack out drawers…
A holder that can hold 2 Blistex original chapsticks
I modeled the holder for my wel-bilt screwdrivers… Phillips and Flat. It is pegboard compatible or screw it to a wall. Enjoy! https://www.northerntool.com/shop/tools/product_200579893_200579893…
Designed as to keep the device safe and easy to mount to small stands for testing projects and boards where access is limited, The case is designed to be 3 Lego bricks wide and 1 tall, so can easily be built around if you need to enclose…
1913 railed endcap for wtf9 prop gun. Category: Sport & Outdoors
If you want to make your desk organized, use this holder if you own a studio coloured pencil sharpener!
This is my second version of a part cooling solution using the berd air system. This solution allows for strong and lightweight cooling: The minimal design reduces inertia of the print head and the part is easily mounted directly onto the…
Made this so that people could hang some photos onto the Honeycomb Storage Wall. As for the meme on top, I also mean photos which are a shape of a rectangle that's positioned on the horizon axis.
This piece fits the " Wall Outlet Smartphone dock v2 " wall plate file from rubb3rtoe. The holder was too small for my phone with a case so I designed a larger holder that should fit most phones. Instructions : Printed the file upright,…
This is a simple mount and holder designed for the Valve Steam Deck and Steam Dock, which can be attached to a VESA monitor arm. ** I have a kill switch case/skin, so there may be more spacing between the cutouts for a non-kill switch…
A printable hotend fan cage for the Sooway Sw-200 made from remixing the following Things: "Ender 3 Noctua NF-A4x20 FLX stock type hot end" by zuch95701 (the base for the cage) "Yet Another Ender 3 BLTouch Mount Remix" by gercole (the…
Gridfinity box for under desk/under shelf. Inside dimentions are 169x169x58mm. Snuggly fits 4x4 gridfinity, which should be 168x168mm! Knob is attatched with short m5 bolt. Other screw holes are 5mm.
This is a MOLLE compatible version of my Dart Zone Pro Mk2.1 (or Pro-mag) holder. I recommend printing the model standing on the bottom plane with tree supports. Double check to be sure that your slicer has supports under the bottom loop…
Just a little improvement on a great design. If you aren't mounting on a rail with panels, use the original. Removing one of the wings from the original allows you to use this on the outside of an enclosed printer, such as for for my…
IKEA VARIERA sized chopsticks container
just a fun badge for those who like the crusades and it is meant to be attached to MOLLE straps.
Adjustable mount for use with the EnXLosure.
This print uses 2 additional Items to hold and power the Pi internally in an Epson TM-T88V Thermal Printer. May work with the TM-T88IV, not sure. First off is a Cheap USB adapter: https://www.aliexpress.us/item/3256806528208397.html This…
i wanted to mount my yaesu 65R and decided to make a part to hold it.
All reference frames: left, right, front (lower), back (upper) are relative to a person standing in front of the machine. I printed this on a Prusa XL with standard .4mm nozzles using .15 layers and first layer in PrusaSlicer. The…
it need some bolts and nuts to hold it to the body. I believe i used 7/8th,
Have you played Catan and wished to place your drink on the board? Now you can with this model. You can replace any tile with this hex can holder. It is suggested to replace the desert tile in order to not affect game play. 75mm x 90mm…
prints and works well! give your sidewinder some more life!
I created this to make an affordable magnetic game controller that could keep my phone in a standing position and fold away nicely while comfortably sitting on the back on my phone. It fits slimly in the pocket and incredibly light weight…
1/2 and 1/4 inch router bit holders, compatible with the Veritas/lee valley router bit holding track system. Material requirements were minimized by lofting and fluting the exterior diameter. The inner bore is slightly tapered so that the…
Upscaled to work with CAT 6A
Print with Support from baseplate only. Other than that its a straight forward print.
Wanting to give your balls a boost? Introducing the ball kicker for the Hubelino ball system! Note: Tested with 24mm plastic marble and 3D printed Hubelino parts. Any feedback would be appreciated.
This special type of slide dips your marble from one height to another in a special way. Thanks to the help of gravity! Any feedback would be appreciated!
This is a MOLLE compatible version of my Dart Zone Pro Mk2.1 (or Pro-mag) holder. I recommend printing the model standing on the bottom plane with tree supports. Double check to be sure that your slicer has supports under the bottom loop…
