Counting matching models…
The model has the same dimensions as the one from Foppemoa , but you can use with this design the original filter. My air conditioner is an Electrolux Chill Flex Gold (EXP26U758CW). The cover fits probably many more models of Electrolux…
I recommend checking out remixes made by @ Hanak1nSolo and @ fneb Both are great, and could be a better fit for your specific case! You can find them in Remixes tab window outlet size is 40mm x 200mm is has the same area as the input…
Phone holder with sphere console mount for Dacia (tested in Dokker, should be similar for Logan and Sandero). Printed from PETG on Prusa Mini + as three part kit. Top cover is glued to two bottom mounts. Foam stripe is added between…
Portable air conditioner window extension printed in PLA+. - Inner: 190mm X 95mm X 12mm - Outer: 190mm X 100mm X 20mm If printed vertically, supports are not needed. If printed horizontally, supports are required.
Easy PLA print - all buttons are accessible while in the holders, remotes are easily removable, installs with two small screws. Parametric OpenSCAD file (FanRemoteHolder.scad) means you can measure any vaguely similar remote & insert the…
separate into parts for easy mmu coloring 1x3mm magnets press in. use a little glue if magnets are a little loose. My container for these tokens can be found here . these work with my miniature base and HP dial system will be adding…
Made for the Daikin Air Con remote, could work with other brands. I printed it in pla and used some simple rail hangers to hang it. No supports needed. Printed with MK4 with input shaper and generic PLA in about an hour.
To replace the air vent and have a support for the telephone or other.
Condition Token Box for Gloomhaven, Jaws of the Lion with magnetic Lid. Made for my Condition Tokens for Jaws of the Lion , but will work with any 15x15mm square tokens. Holds 7 of each with a slot for extras. (One of each token is also…
I created an air conditioning exhaust including a plug against unwanted influences (insects, birds, etc.) I used full perimeters and 0.25 layers. Very easy to print. I put insulating tape between the plug and the exhaust body (with 1mm…
A collection of the most common condition, status and effect rings for your D&D and PF gaming table. Sized to fit around medium bases or hang over larger miniatures. Included step and fusion 360 parametric source files so you can play…
Update: anbei der Modellink zu thinkercad . Besonders in diesem Sommer hatte ich einige Update- und Remixanfragen zum Modell. Ich will das Modell mit euch teilen, fühlt euch frei es für eure Zwecke zu optimieren. Damit lässt sich die…
First model ive uploaded, probably the 3rd ive ever made. Not a cad pro, so please forgive me. I based this off a picture from amazon, using eyesight and a bit of maths. Both of which arent so good, so if its a little inaccurate i do…
Air conditioner exhaust into the ventilation window. Výdech klimatizace do okna ventilace. Category: Household
Saw indicators like these made by thelukec. I wanted the letters to be more defined, so I remade the model with the letters embedded in the ring, but raised by a millimeter. Happy with the way they turned out. This is the first model have…
ISO 7010 - Safe condition Signs In my profiles there is 1 sign per printing plate, the printing plates are named accordingly. As the number of printing plates per profile is limited, the files are divided into several profiles. I have…
DE (EN see below): Einfaches Klicksystem um 150mm Klimaschläuche an einer Durchführung im Fenster oder einer Tür zu befestigen. Funktioniert sowohl für harte PVC-Schläuche als auch weiche Soft-Schläuche (z.b. Kaltluft-Ansaugung). Das…
lost your cap while refilling your car aircon? just print one. This is the M8x1 R134a System Cap, 13 mm. Downside: The thread is along the layer lines but as there ist no pressure and just a dust cap it'll work.
Systems shutdown initiated! A quick remix of this fire ring (by Guerrero4de), scaled for BattleTech hex bases to show overheating 'Mechs or fire. WARNING: Strictly NOT to be used as a cock ring! Please feel free to leave a tip if you like…
These are the parts I constructed to modify the monobloc air conditioner PAC EX100 from DeLonghi from 1 hose to a two hose setup. The parts are relatively big, since the air intake area on the air con is quit big. The parts fit the Prusa…
In this project I designed a Midea 2-in-1 hose adapter for my REAL COOL 35 air conditioner. After several attempts, it now works great. It is crucial to use materials such as chipboard or multiplex with a thickness of 15mm. However, the…
Il s'agit d'une pièce qui semble casser régulièrement sur les C4 Picasso. Il s'agit de l'engrenage partie haute de la pièce qui ouvre et ferme les volets pour la circulation de l'air chaud ou froid. Il existe une version sur Thingiverse,…
I didn't like how hard it was to ring the condition rings from Lynx, so I designed this. The condition rings can be found at Amazon.
I have an airco with a 150mm exhaust hose and a 100mm “plug” to connect it to the window. A made a simple adapter to connect en 150mm hose to a 100 hose. step file included so you can change it if you want to. I printed them at 0.36 on a…
Pokemon mini tin insert that can carry up to 12 condition makers. 6 on each side. Made to fit two regular condition makers and 6 ETB condition makers. Made with a bit of tolerance in order to accomodate the coins better. Update:…
This is a wall mount collar that fits a 5.9 inch exhaust hose for a portable air conditioning unit. The base was designed to cover a 6.38 in (162 mm) diameter hole drilled in drywall. Most can-light hole saws are about this size. The…
Air deflector for standard centralized ac vents. Use magnet of size 35x10x3 mm (LxBxW) 215mm for larger vents
I designed this, in order to extract fumes from soldering and 3D printing directly out of the closest window. For this I use the AC Infinity Cloudline A4 duct fan. The model consists of three parts that can simply be stuck together. The…
I needed to vent the hot air from our AEG airconditioning/AC unit and the only option was the letterbox in the main door. So I designed this adapter that goes from 150mm flexible pipe to a rectangular/letterbox shape. Modelled in OnShape…
Fits EcoFlow WAVE 2 Portable Air Conditioner with Heater exhaust ducts E and D. It is hard to cut a perfect circle, so print these, screw and/or glue it to the board for a perfect fit. Cut the board to the size of your window and put some…
I didn't like that support was needed for the original storage box so i created a version that can be printed without support. The clip is also not required to be printed in TPU and works with PLA. The condition rings in the pictures are…
Adaptateur de climatisation tuyau souple 150mm à visser vers 100mm PVC. Conçu en deux parties à recoller. Imprimé en ASA pour usage extérieur et sous flux d'air chaud. Air conditioning adapter flexible hose 150mm to screw to 100mm PVC.…
I was having problems with our portable air conditioner's exhaust hose popping off of the window cover. So, I designed a quick-connect to solve this problem. This should fit most portable A/C units with a hose diameter of about 144mm.…
Parts of the air conditioning grille of a Peugeot 206 car. Center control and middle side parts. It's simple designed and it works.
Customizable D&D 5E Condition Rings Included: - Pre-configured Condition Ring Sets in 4 different styles (Embossed, Engraved, Outset, Inset) ready for printing. Each set includes 26 different conditions and 10 generic numbered rings for…
This is a collar to mount flexible, 5" accordion duct to a drop ceiling or plywood, etc. It screws in to the duct. The outside diameter is 169mm to allow it to be printable on most printers. I have added a second model that includes screw…
Version 2 of this hose connector for airconditioners. After printing, this fit perfectly and allowed me to extend the proprietary 5.9" hose that came with my Delonghi Pinguino air conditioner with a cheaper, spurious 5" hose, giving me an…
Had to extend my exhaust hose on my portable AC as explained in this amazon review : http://www.amazon.com/gp/customer-reviews/RHTXOMLKK2RAC/ref=cm_cr_pr_rvw_ttl?ie=UTF8&ASIN=B0048ELABM I didn't want to cut the provided wall adapter so I…
I needed a 2nd exhaust adapter for a 2nd hose. This is a copy of the original, drawn by me. It is suitable for a 150mm diameter hose. I've attached the Fusion 360 file in case anyone wants to adjust the size to suit their unit. The…
More spare parts available: Air conditioning trim pack https://cults3d.com/es/modelo-3d/variado/air-conditioner-trims-for-seat-ibiza-ii I also have several spare parts for Seat Ibiza II: Spare hinge for the trunk tray:…
Rings to track conditions in DnD. Besides the 15 conditions from the conditions section in chapter 1 of the PHB, I also added Bless, Concentrating and undefined ring. Undefined can be used if you need to track something that isn't on any…
During our play we were annoyed by the time it took to find tokens! See my other designs… So I went ahead and created these trays. They fit in one of the game's trays, and slide very nicely out to put on the table. And everything is so…
Do you get hot in your car while driving? Do your passengers complain about your weak A/C? Do you want to experience the thrill of having a leaf blower aimed at your head while on the highway? Or maybe your A/C just broke and you're…
Hier findet Ihr ein Modell eines 3-teiligen Luftkanals um den Schlauch einer mobilen Klimaanlage mit Außendurchmesser 150mm besser als mit der originalen Halterung an einem Dachfenster befestigen zu können. Der Kanal ist insgesamt 38cm…
Exhaust vent adapter for portable air conditioner, desgined around a "click CPAC1907-C" but should fit any unit with an outlet of 110x140mm and 3mm thick base. Suits a 100mm duct pipe
This model has no real purpose. It was meant as a joke gift. I had originally posted it on cults and for some reason actually had quite a few visits and downloads. Thought I'd share it here too.
Surprisingly couldn't find one of these modelled up anywhere. Accidentally threw the original out and shipping times out here are usually over a week, so instead of waiting I figured I'd make one so anyone else who needs it can have it…
90° adapter for air conditioners. Hose diameter is 15cm . The bottom is flattened to fit my BambuLab printer and print faster. Have to the original in terms of wind speed only 0.2m/s loss (original 9.6m/s - 90° adapter 9.4m/s). Please…
Portable Air Conditioner Exhaust Hose Coupler Fits the exhaust port of a standard Portable A/C and a hose diameter of 5.9in (or 150mm) This can be printed in any material, I would encourage PETG as it does get warm. I use PLA and have not…
The clips on these dual hose portable air conditioners are notorious for breaking. This is a solution that saves you buying a whole replacement hose/interface for your Danby or Midea A/C. The clips can be retrofitted to any A/C hose…
This knob is for the Air conditioning my Air conditioner knob was broken for almost a year. but recently I bought a 3D printer. So I design this knob. it takes me 4 trays but eventually, I get it. so I want to share it in this website for…
This could be useful for controlling the direction of airflow, especially in situations where you want the cool air to be directed upward rather than straight ahead. It could potentially help the cool air to reach further. Just print and…
This part allows a portable AC unit to be connected to a 5" rigid ducting pipe for external venting. My case was through a conservatory wall (UK) during a heatwave. Threaded side screws onto a 6" Portable AC Hose and the other side is…
Fixup for the 5.9 inch exhaust hose for a portable air conditioning unit. Original was almost unprintable.
Adapter for LG portable standing/rolling 9000 BTU AC unit, model: LP0910WNR May fit other models as well. I wanted something to replace the flimsy plastic panels included with the unit, so i made a more solid window panel with a wood…
Combs to reshape the ac fins
Flaps can be connected each other. Each flap is 298 mm wide. I designed for my AC. You may need to adjust flap size for your AC. Step file was also added for flap. To eliminate weight print with one perimeter and %0 infill. Support is…
Hello there, this is an dual hose adapter for the Beko BP209H portable air conditioner. It fits perfect with some duck tape or silicone. Printed with some big printer e. g. Anycubic Chiron. Print Settings Printer Brand: Anycubic Printer:…
I picked up a used portable AC unit that had almost none of the original duct work. Rather than spend $80 on replacements, I reverse engineered the piece I had and designed these elbows to fit my application. Printed out of PETG at 100%…
Print BOM: 1x House Side (Rivet or M4 Nut 1x Exterior Vent Cover 2x Clamp Hardware BOM: 6x Wood screws (~20mm in length) 2x M4 flat head screws 2x M4 Rivet nuts or Hex Nuts Wood as needed to fit your application I designed this as a pass…
Organizer for the following: All Status tokens 5 Poison tokens 5 Poison tokens 5 Muddle tokens 5 Muddle tokens 5 Wound tokens 5 Wound tokens 5 Strengthen tokens 5 Invisibility tokens 5 Disarm tokens 5 Stun tokens 5 Immobilize tokens…
Remote Control Holders for Air Conditioner (should fit any model) & Television set (Xiaomi) & a Ceiling Fan. Prints in standard PLA
The passage through the wall is made for a wall thickness 100 [mm] +/- 10 [mm]. The exit is made for a wall thickness 5-15 [mm].
Print in different colors and designed for color swapping or AMS color printing. *Added flat versions for 25 and 32mm bases in case they don't fit in the lipped versions. Amazon affiliate link for 3x2 magnets Video:
Simple condensation drain hose filter/plug to prevent insects entering the hose. Fits Artiplastic 0020TU hose with 20mm outside thread. Print Settings Printer: Haribo3030 Rafts: No Supports: No Resolution: 0.2 Filament: DevilDesign PETG…
Print in a higher temperature resistant material.
Set of condition rings to go with my normal size hex for d&d and gloomhaven https://www.thingiverse.com/thing:6052215 Print Settings Printer Brand: Anet Printer: A8 Plus Rafts: No Supports: No Resolution: 0.2 Infill: 100% Filament:…
I recommend printing it with PETG. PLA will get too soft due to the heat
Remote holder for the universal QD-U02B Air Conditioner control board which is a cheap replacement for burnt AC electronics. It allows operation of the remote without removing it from the holder because you can slide its cap through the…
An AC adapter for the hose with a narrow ending couldnt find an adapter that fitted so i made my own. inside diameter is 130mm the narrow part of the outlet is 70mm long. Printing instructions I recommend using PLA I recommend printing at…
Warning!! Fan manufacturers make tiny differences in their fans, so please measure your fan and update the model accordingly. I have provided the .Blend files if you wish to modify them from the source. My modeling method is centered…
The squirrel cage fan on my Polocool PC-53APC portable air conditioner cracked and split in half. No spare parts are available, so I designed a replacement. As this fan is on the hot exhaust side of the system, you will need to print it…
1. Introduction Winter……oops………Hot Summer is Coming ! That's why I bought a portable air conditioner with a 150mm hose. Unfortunately, it is common here in Europe to have “casement windows” (windows with vertical rotation axis) while…
This Product has been updated to fix an parameter Issue for the connetion point with the conditioner. I also add a little addon part to fix the gap in v4 for the design issue. This had only to be used tu update the Version v4! The new…
I needed a 90 degrees duct to connect my air conditioning duct (150mm) to my ventilation system (125mm), without the use of excessive amounts of duct tape It fits on a mks3s+ build plate, well it kind of fits. :D I suggest you split it up…
You will also need: -2 screws 6mm -super glue What is inside? -flaps (two kinds) - one with screw holes (it's essential part). second one is only to extend width of basic flap. It might be scaled to fulfull air conditioner outflow hole.…
A ventilation/exhaust outlet mount adapter/coupler for Pro Klima and similar portable air conditioners. I have no idea of how common this connector is or if this kind of adapter fits other units, but I couldn't find a replacement part…
I found the coils on my Midea Portable Duo Air Conditioner got dirty pretty quickly and it was somewhat difficult to clean them, so I wanted to add a filter to the intake so I could just pop it off and wash it periodically while…
IT Pinguino De Longhi, adattatore scarico aria calda vero l'esterno, diametro interno 130mm, esterno 135mm, identico all'originale, adattabile a qualsiasi condizionatore EN Pinguino De Longhi Portable Air Conditioner air vent, exhaust…
I drew up this replacement screw-on end cap ring for our Toshiba portable air conditioner's exhaust hose after finding one of the original rings had broken and wouldn't keep the hose attached very well anymore. It works just like the…
I have attached a ring for the optics with rain deflector to the outside ATTENTION: Please print in PETG / ABS or better. Please download the files for the hose adapter from the original creator.…
DISCLAIMER : This is a repost of the work done by boundarycondition on Thingiverse. I am just reposting his work here since the original URL does not work anymore. All the credit for this amazing work goes to him. Modular Hydroponic Tower…
Allows you to use a standard garden hose to drain water from your Daikin AC outdoor unit. Designed for the RZQ125KCV4A model, but will likely fit others as well. Print with a sturdy filament if you can, otherwise it can be a bit delicate.…
Holder for all condition tokens from Darkest Dungeon board game. I had to divide bleed/blight tokens into two groups (1 and 2 side + 3 and 4 sides) for easier usage during game. Lid has to be held by rubber band.
I made a retainer ring for the exhaust on my portable A/C unit. I believe this is a common size, let me know if you need it resized. Print instructions I didnt do anything fancy with the screw holes, so you'll likely need support for…
I created this vent to be used with my tilting windows. The air conditioner I have is a FUAVE ACB09K01 and this vent clicks on the end that is designed to be used with the fabric window gap closer. Normally you need to Velcro strips to…
Couple of brackets to build an air deflector for an air conditioner. I used a piece of thin plexiglass I had lying around, but a folded piece of paper should do as well. The brackets are mounted using double-sided tape.
I made this holder for holding 3 remote controllers. Amazon Fire TV stick SONY Remote Commander RM-PLZ530D Sharp B047JB I used the Reprapper Silk PLA filament . However, you should use the Reprapper PLA+ filament . These filaments are…
Made a vent for portable air conditioner. The diameter of the pipe from the air conditioner is 150mm. Just slip on the pipe and tighten it with zip ties.
A case to hold condition rings, with space to add a magned to the tray and case to help keep it closed whilst travelling Both the tray and the case print in one piece on the Prusa MINI, no supports needed for either piece. I added a piece…
Magnetic tags to track various conditions or statuses on initiative trackers atop a DM screen. I made my own initiative trackers for my home game from cheap craft wood, and I embedded a small magnet into the top edge. My plan was to be…
Voici un remix renforcé de Allan Fonroques Imprimé en ABS
The cover and hose ring to add an intake hose. Only fits model EXP35U538CW!!!
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker If you're anything like me and you hate anything going to…
+++REMIX FROM "Portable Air Conditioner dual hose conversion plate" by grauerfuchs on Thingiverse+++ Thingiverse link to original You don't have a 3D printer? If you are located in Germany, the Netherlands or Belgium, send me a message…
I lost the adapter to connect the air hose to my mobile air conditioner. My model name is ‘CM 30952 we’. It seems there are similar models where this adapter might fit, too. Made the adapter for a 100mm hose. If requested I can add other…
Air Conditioning Hose Adapter for mobile AC. Supports needed at the finns. Printer Settings: Printer: Artillery SWX 1 Infill: 35% Supports: Yes Raft: Skirt 5 lines Speed: Mid 30-60mm/S Material: Eryone PETG
You can use these in or out of an existing condition ring holder or on their own. These fit perfectly in this D&D Condition Markers . The cut corners can go in any slot, but the the non cut corner ones can only go in the middle. I also…
Yin Yang thin (travel) bottles Pair of thin bottles in a yin yang style, great for storing shampoo/conditioner for traveling. They are 2 separated bottles but when put together form a great visual uniform item. Each contain a threaded…
6-inch hose mount plate compatible with many ready-made snap-ring hoses, but a printable collar is included if you have raw, uncapped 6in hoses instead. re-uploaded - created by grauerfuchs https://www.thingiverse.com/thing:4976916
