Counting matching models…
This is a remix of flummer's battery box in order to use different battery contacts. The contacts I am using are available here for a quite reasonable price:…
18650 Battery Holder – Ready to Power Your Projects! This 3D-printable 18650 battery holder is designed for 18.5mm slide-in contacts (readily available on AliExpress) and is perfect for integrating 18650 cells into your projects. Whether…
Small cover to protect the contacts of you flash remote from scratching other parts in your camera bag. Slides on the contacts easily with a single motion. Tested with remote for Olympus but might work for other mounts too. Feel free to…
This is a positioner for the IWISS SN-2549 crimp tool for Molex SL contacts (male and female). The positioner is secured to the tool using a 20mm M4 screw and nut. Replace the existing screw with the new screw while the jaws are closed to…
The terminals on the Mean Well LRS-350 series PSU are not covered. This fixes that. It will not prevent short or shocks when poking around with a screenshot driver or other conductive items, but at least you won't accidentally touch them.…
18500 Battery holder with contacts (nickle stips). Just pull them trough the two slots.
In winter time when charging the akkupack of my bullitt EP8 sometimes the open contact of the mount were flooded during rain - in the morning when I placed the powerpack the electronics promted an error during short-circuit fail. So I…
Minimalist Ryobi 18V Battery connector with clip. Remixed for use with Keystone 209 contacts. Remixed from https://www.prusaprinters.org/prints/41893-ryobi-18v-battery-mini-clip-with-lock-for-diy-proj
These models are an additive manufactured print-in-place MIL spec-ish electrical connector system. These connectors consist of four components divided into two groups: Shells, wall mount receptacle and straight plug (in this model)…
Fast and easy print. To complete the project you need 2 x M2*8 (or shorter) screws.
Used Keystone 209 battery contacts from amazon. Added some 2 part epoxy behind the Keystone 209 contacts to lock them onto the printed part.
Similar to the other model I uploaded, this is a positioner for the IWISS SN-2549 crimp tool for JST SM contacts (male and female). The positioner is secured to the tool using a 20mm M4 screw and nut (I recommend a thumb nut for tool-less…
Battery holder for CR123a using these contacts: https://www.amazon.com/dp/B0B1ZJ8PNH
Remix of Osfald's model to adjust it for a slightly different shape of 12mm square contacts. See photo. The model is otherwise unchanged, and it fits and holds a single AA battery very nicely. The contacts slide through the bottom of the…
UPDATE: 17-Feb, 2024 @seanauff_1590030 pointed out that the 20V contact cover was a tight fit when used to protect the battery charger contacts. I have DCB112 and DCB115 battery chargers. These have an indexing tab that fits a notch in…
Remix for metall contacts. https://vi.aliexpress.com/item/32884289489.html
Durable contacts protector cap for Leica M10 camera BP-SCL5 battery. Helps to prevent short circuit and keeps battery contacts clean. Two caps can be used on both of BP-SCL5 battery ends for extra protection from dropping damage. Print…
I have Bausch & Lomb contacts that come in rows of 5. This gridfinity bin holds 20 lenses. A pair of bins lasts 20 days. There are two versions: gridfinity_contact_holder_with_collenect_label: Use this version to use the Collenect snap in…
Get this message? My XL is located in a workshop room that reaches 85°F (30°C) at night when the room air is off. The machine ran fine for months until I added the Prusa enclosure, ran my first job, a big job, with PC-CF and it errored…
These models are an additive manufactured print-in-place MIL spec-ish electrical connector system. These connectors consist of four components divided into two groups: Shells, wall mount receptacle and straight plug (in this model)…
A holder for your contact lenses. Hold the ones in use on top while storing boxes of the rest underneath.
Yet Another 18650 Case? Well, yes. This one is special compared to the others on Printables in one respect: it uses inset metallic AA contacts (spring/plate) to help avoid soldering. Also, it has a variant that is specifically designed…
These models are an additive manufactured print-in-place MIL spec-ish electrical connector system. These connectors consist of four components divided into two groups: Shells, wall mount receptacle and straight plug (in this model)…
Material: PETG Nozzle: 0.4mm Layer height: 0.2mm Supports: not needed Perimeters: 3 Solid first layers: 4 You need spring contact plates: https://s.click.aliexpress.com/e/_oF6UUyZ This model designed for the wider (16x18.5mm) spring…
These models are an additive manufactured print-in-place MIL spec-ish electrical connector system. These connectors consist of four components divided into two groups: Shells, wall mount receptacle and straight plug (in this model)…
This design doesn't need any hardware, you just need to glue in the small fiberglass brush into the screw, and the rest of the assembly is purely mechanical. Printed out of Creality Hyper PLA and generic PLA, only the pen body needs…
in healthcare catagory beacuse contacts are medical prescriptions
The terminals on the PSU of an ender 5 are not covered. This fixes that. It will not prevent short or shocks when poking around with a screenshot driver or other conductive items, but at least you won't accidentally touch them. I tried to…
These models are an additive manufactured print-in-place MIL spec-ish electrical connector system. These connectors consist of four components divided into two groups: Shells, wall mount receptacle and straight plug (in this model)…
90 degree backshell for DEUTSCH DT06-12SA-P012 used on for example agricultural GPS receivers. An adapter for a M16 with 16mm outer diameter corrugated pipe is included in the back of the shell. Also included is a clip on dustcover for…
These models are an additive manufactured print-in-place MIL spec-ish electrical connector system. These connectors consist of four components divided into two groups: Shells, wall mount receptacle and straight plug (in this model)…
Simple, minimal glasses and contacts tray.
These models are an additive manufactured print-in-place MIL spec-ish electrical connector system. These connectors consist of four components divided into two groups: Shells, wall mount receptacle and straight plug (in this model)…
See updated version in: Daily Contacts Holder Gridfinity Bin I have Bausch & Lomb contacts that come in rows of 5. This tray holds all 10 pairs. There is a embossed L and R to keep the contacts separated. If you want the letters to stand…
These models are an additive manufactured print-in-place MIL spec-ish electrical connector system. These connectors consist of four components divided into two groups: Shells, wall mount receptacle and straight plug (in this model)…
This case meets following needs of mine. Carry on contacts on airflights Store a backup in the fridge … while hydrogen peroxide solution is still making bubbles. You want to avoid airtight containers, but also leaking solutions. (Well,…
These models are an additive manufactured print-in-place MIL spec-ish electrical connector system. These connectors consist of four components divided into two groups: Shells, wall mount receptacle and straight plug (in this model)…
I liked the way the bracket had a cover for the front, but the way I wanted my power supply on the side of my desk meant the contacts were a bit more accessible than I'd cared for, I took the original cover design, and added a 15mm lip on…
Anderson Power Products PP15-45 Heavy Duty Power Connector Housing, 1 Contacts, Корпус разъема
print it with 20% infill and tree supports.
Minimalistic wall mountable contact lens dispenser. Fits exactly in a Core One +, printer with a brim just to make sure it won't fall. Might not be needed neccesserarly. Print as it stands, if it's too tall for your printer (~280mm) you…
These models are an additive manufactured print-in-place MIL spec-ish electrical connector system. These connectors consist of four components divided into two groups: Shells, wall mount receptacle and straight plug (in this model)…
These models are an additive manufactured print-in-place MIL spec-ish electrical connector system. These connectors consist of four components divided into two groups: Shells, wall mount receptacle and straight plug (in this model)…
These models are an additive manufactured print-in-place MIL spec-ish electrical connector system. These connectors consist of four components divided into two groups: Shells, wall mount receptacle and straight plug (in this model)…
Contact shield for the Cynova Dual Battery charging case for the DJI Mini 2 batteries (may fit other similar chargers). This allows you to transport the batteries in the charging case while shielding the batteries from the contacts so…
For a lamp in which an axis should rotate, I was looking for a way to transfer voltage to the rotating axis. So I developed the option shown here. In the hardware store I bought copper connectors with an inner diameter of 15mm for pipes…
Since I have not found anything like this (maybe I searched wrong) I have made a simple 18650 case using additional M4 screws, nuts and some connector. if possible, using a custom bus bar ? I have yet to experiment with the best way to do…
These models are an additive manufactured print-in-place MIL spec-ish electrical connector system. These connectors consist of four components divided into two groups: Shells, wall mount receptacle and straight plug (in this model)…
A simple Gridfinity bin to hold Bausch + Lomb (and possibly other brands with similar shaped packaging) contact lenses. Includes customizable labels for left/right. Print with your material of choice, no supports needed, don't use a brim…
This size of electric plate was never produced by lego, I don't know of a prototype in that size. Model of the plastic part of the Lego Electric Plate 2 x 2 with Contacts. You can obtain the metal parts from broken Lego 9v electronics.…
Description Simple. Compact. Practical. This compact, 3D-printable holder accommodates two 18650 lithium-ion cells side by side , using separate metal positive terminal plates and negative spring contacts. The single-piece tray includes a…
I was recently convinced of the importance of only wearing disposable contacts for the stated period of time (1-week, 2-weeks, 1-month, depending on brand and type). Rather than using calendar notifications or app reminders, I thought it…
Extremely Simple 18650 Battery Holder with slots for contacts
Charge clip for the original Pebble Smartwatch using spring loaded contacts. Things you'll need to build a charger clip: Printed chargerclip Printed cablecap (for your cable diameter - see below) 2x 1mm diameter spring loaded pogo pins…
These models are an additive manufactured print-in-place MIL spec-ish electrical connector system. These connectors consist of four components divided into two groups: Shells, wall mount receptacle and straight plug (in this model)…
These models are an additive manufactured print-in-place MIL spec-ish electrical connector system. These connectors consist of four components divided into two groups: Shells, wall mount receptacle and straight plug (in this model)…
I designed a Cover to cover the AC Contacts of my Ender 3 NG in the electronic backpack. It fits into the Ender3NGs Electronics Backpack, but you can also just use it with the Component as is. Within the E3NG Electronics Backpack there is…
Preview: https://a360.co/3J71dAy
Model of the plastic part of the Lego Electric Plate 1 x 2 with Contacts. You can obtain the metal parts from broken Lego 9v electronics. You can cut larger metal plates to size. This is best printed studs down. You will need to melt the…
These models are part of an additive manufactured print-in-place MIL spec-ish electrical connector system. These connectors consist of four components divided into two groups: Shells, wall mount receptacle and straight plug (see…
Small shelf that fits into the shelf peg holes of an Ikea Godmorgon medicine cabinet, which I believe are pretty standard size and spacing but feel free to remix if need be for other cabinets. Top of the shelf is perfect size for a…
These models are part of an additive manufactured print-in-place MIL spec-ish electrical connector system. These connectors consist of four components divided into two groups: Shells, wall mount receptacle and straight plug (see…
This is a simple, compact case for storing a pair of glasses and 10 days worth of daily wear contact lenses. It has separate compartments for Right and Left contact lenses on either side of the central glasses compartment. I use a…
This is X12V battery pack cover. Designed in FreeCAD, source file included. Category: Tool Holders & Boxes
These models are part of an additive manufactured print-in-place MIL spec-ish electrical connector system. These connectors consist of four components divided into two groups: Shells, wall mount receptacle and straight plug (see…
These models are part of an additive manufactured print-in-place MIL spec-ish electrical connector system. These connectors consist of four components divided into two groups: Shells, wall mount receptacle and straight plug (see…
These models are part of an additive manufactured print-in-place MIL spec-ish electrical connector system. These connectors consist of four components divided into two groups: Shells, wall mount receptacle and straight plug (see…
These models are part of an additive manufactured print-in-place MIL spec-ish electrical connector system. These connectors consist of four components divided into two groups: Shells, wall mount receptacle and straight plug (see…
These models are part of an additive manufactured print-in-place MIL spec-ish electrical connector system. These connectors consist of four components divided into two groups: Shells, wall mount receptacle and straight plug (see…
These models are part of an additive manufactured print-in-place MIL spec-ish electrical connector system. These connectors consist of four components divided into two groups: Shells, wall mount receptacle and straight plug (see…
These models are part of an additive manufactured print-in-place MIL spec-ish electrical connector system. These connectors consist of four components divided into two groups: Shells, wall mount receptacle and straight plug (see…
These models are part of an additive manufactured print-in-place MIL spec-ish electrical connector system. These connectors consist of four components divided into two groups: Shells, wall mount receptacle and straight plug (see…
Which one to print? Home & Dorm – Holds all contact supplies at once, includes space for a mirror, and fits standard 12 oz peroxide bottles. Great for both dorms and home use. Travel size normal – Fits travel-sized 3 oz peroxide bottles.…
The standard mechanical relay pictured is still remarkably useful particularly for switching normally closed circuits to normally open and vice versa. However they have to be mounted in a box to prevent accidental elecrocution because of…
These models are part of an additive manufactured print-in-place MIL spec-ish electrical connector system. These connectors consist of four components divided into two groups: Shells, wall mount receptacle and straight plug (see…
These models are part of an additive manufactured print-in-place MIL spec-ish electrical connector system. These connectors consist of four components divided into two groups: Shells, wall mount receptacle and straight plug (see…
These models are part of an additive manufactured print-in-place MIL spec-ish electrical connector system. These connectors consist of four components divided into two groups: Shells, wall mount receptacle and straight plug (see…
These models are part of an additive manufactured print-in-place MIL spec-ish electrical connector system. These connectors consist of four components divided into two groups: Shells, wall mount receptacle and straight plug (see…
These models are part of an additive manufactured print-in-place MIL spec-ish electrical connector system. These connectors consist of four components divided into two groups: Shells, wall mount receptacle and straight plug (see…
I designed a Cover to cover the AC Contacts of my Ender 3 NG in the electronic backpack. It fits into the Ender3NGs Electronics Backpack, but you can also just use it with the Component as is. Within the E3NG Electronics Backpack there is…
These models are an additive manufactured print-in-place MIL spec-ish electrical connector system. These connectors consist of four components divided into two groups: Shells, wall mount receptacle and straight plug (in this model)…
These models are an additive manufactured print-in-place MIL spec-ish electrical connector system. These connectors consist of four components divided into two groups: Shells, wall mount receptacle and straight plug (in this model)…
These models are an additive manufactured print-in-place MIL spec-ish electrical connector system. These connectors consist of four components divided into two groups: Shells, wall mount receptacle and straight plug (in this model)…
These models are an additive manufactured print-in-place MIL spec-ish electrical connector system. These connectors consist of four components divided into two groups: Shells, wall mount receptacle and straight plug (in this model)…
These models are an additive manufactured print-in-place MIL spec-ish electrical connector system. These connectors consist of four components divided into two groups: Shells, wall mount receptacle and straight plug (in this model)…
These models are an additive manufactured print-in-place MIL spec-ish electrical connector system. These connectors consist of four components divided into two groups: Shells, wall mount receptacle and straight plug (in this model)…
These models are an additive manufactured print-in-place MIL spec-ish electrical connector system. These connectors consist of four components divided into two groups: Shells, wall mount receptacle and straight plug (in this model)…
These models are an additive manufactured print-in-place MIL spec-ish electrical connector system. These connectors consist of four components divided into two groups: Shells, wall mount receptacle and straight plug (in this model)…
These models are an additive manufactured print-in-place MIL spec-ish electrical connector system. These connectors consist of four components divided into two groups: Shells, wall mount receptacle and straight plug (in this model)…
These models are an additive manufactured print-in-place MIL spec-ish electrical connector system. These connectors consist of four components divided into two groups: Shells, wall mount receptacle and straight plug (in this model)…
These models are part of an additive manufactured print-in-place MIL spec-ish electrical connector system. These connectors consist of four components divided into two groups: Shells, wall mount receptacle and straight plug (see…
These models are part of an additive manufactured print-in-place MIL spec-ish electrical connector system. These connectors consist of four components divided into two groups: Shells, wall mount receptacle and straight plug (see…
These models are part of an additive manufactured print-in-place MIL spec-ish electrical connector system. These connectors consist of four components divided into two groups: Shells, wall mount receptacle and straight plug (see…
These models are part of an additive manufactured print-in-place MIL spec-ish electrical connector system. These connectors consist of four components divided into two groups: Shells, wall mount receptacle and straight plug (see…
These models are part of an additive manufactured print-in-place MIL spec-ish electrical connector system. These connectors consist of four components divided into two groups: Shells, wall mount receptacle and straight plug (see…
These models are part of an additive manufactured print-in-place MIL spec-ish electrical connector system. These connectors consist of four components divided into two groups: Shells, wall mount receptacle and straight plug (see…
These models are part of an additive manufactured print-in-place MIL spec-ish electrical connector system. These connectors consist of four components divided into two groups: Shells, wall mount receptacle and straight plug (see…
These models are part of an additive manufactured print-in-place MIL spec-ish electrical connector system. These connectors consist of four components divided into two groups: Shells, wall mount receptacle and straight plug (see…
These models are part of an additive manufactured print-in-place MIL spec-ish electrical connector system. These connectors consist of four components divided into two groups: Shells, wall mount receptacle and straight plug (see…
These models are part of an additive manufactured print-in-place MIL spec-ish electrical connector system. These connectors consist of four components divided into two groups: Shells, wall mount receptacle and straight plug (see…
