32 models
German Mein Design dient als Ersatz für den original Flügelhalter (C-00180-005-2). Es funktioniert beim Team Corally Punisher (MLine) und auch bei anderen Modellen von Team Corally, die diesen Flügelhalter mit der originalen Teilenummer…
German Dies ist ein Remix des Design von Kaltschmiede_Racing auf Thingiverse.com. Ich habe das Punisher Logo hinzugefügt. Es funktioniert beim Team Corally Punisher (MLine) und wahrscheinlich auch bei anderen Modellen von Team Corally.…
German Mein Design dient als Ersatz für den original Flügelbefestigung (C-00180-005-2). Es funktioniert beim Team Corally Punisher (MLine) und auch bei anderen Modellen von Team Corally, die diese Flügelbefestigung mit der originalen…
German Mein Design sorgt dafür, dass der Kolben des Dämpfers geschützt wird. Es funktioniert beim Team Corally Punisher (MLine) und wahrscheinlich auch bei anderen Modellen von Team Corally. Ich habe es in TPU mit 100% Infill gedruckt,…
Durability The stock ones broke for me in a couple packs, mostly because of wheelies and not even crashes. These have lasted me 1 year in PETG and then finally broke. The TPU ones I replaced them with haven't broken and I don't expect…
German Mein Design sorgt dafür, dass weniger Schmutz und Dreck in das Innere des Autos kommt. Durch diesen Innenkotflügel wird das Innere besser vor dem Schmutz und Dreck geschützt, der durch die Vorderräder aufgewirbelt wird. Ich habe…
German Mein Design sorgt dafür, dass weniger Schmutz und Dreck in das Innere des Autos kommt. Durch diesen Innenkotflügel wird das Innere besser vor dem Schmutz und Dreck geschützt, der durch die Vorderräder aufgewirbelt wird. Ich habe…
German Mein Design sorgt dafür, dass der Flügel bei Überschlägen usw. geschützt ist und nicht verkratzt. Es funktioniert beim Team Corally Punisher (MLine) und wahrscheinlich auch bei anderen Modellen von Team Corally, die den selben…
German Mein Design sorgt dafür, dass die Dämpfer (Shocks) oben an der Befestigung am Shocktower geschützt werden. Es funktioniert beim Team Corally Punisher (MLine) und wahrscheinlich auch bei anderen Modellen von Team Corally. Ich habe…
Rear wing and its reinforced supports To attach the reinforced wing supports, you will need 4x M3x20 screws Printed in TPU for greater flexibility.
Zur Montage an der Wand werden nur zwei kleine Nägel und ein Hammer benötigt.
German Mein Design sorgt dafür, dass kein Staub, Schmutz und Dreck in die Verschraubung des Pivot Ball kommt. Es funktioniert beim Team Corally Punisher (MLine) und wahrscheinlich auch bei anderen Modellen von Team Corally. Ich habe es in…
This is a 40 mm Fan Mount for the Kuron 825 Motor which is used in many cars by Corally. Diameter is 40 mm, so it should fit also on other Motors. Needed: Print Two Holder Two Zip Ties with maximum 4.8 mm width Four M3x20 screws Fan…
I wanted to upgrade to 40mm fan on my Team Corally Torox 185 ESC. Simple, but works very well. Even on 6s and in summer temperatures, the ESC never did a overheating emergency shutdown. Print Settings Printer: Sidewinder X1 Rafts: Doesn't…
I designed this Skidplates as the Chassis of my Python is heavily scratched, especially in the Front. These skidplates are intended to protect the chassis. If you want your chassis to be more stiff, you better buy skidplates made out of…
I got the Team Corally TorqMaster drivers and box drivers for Christmas, so of course I needed a nice holder for them! I think the 3D model turned out quite well, but I ran out of filament halfway through... so now the top part is orange!…
I know, I know - it does not replace the original Parts from Corally which are made out of Graphite. But it looks nice if printed in red and PLA is also pretty stiff. Better than without! :D Team Corally - Chassis Brace Stiffener: Front:…
This part broke after the car hit against an obstacle. Disgned this quick'n'dirty and will use it until the next order. The original spare parts costs just a few bucks. Replaces one part in this set: C-00180-036 I removed the stairs…
Corally does not use closed wheel nuts and after touching a wall several times, the Wheel Hex Adapter and the nut is pretty damaged on my car. I designed this to protect it. Printed in TPU with a tight fit. Since I mounted it, I never…
Service Pack 1 for the Corally Python Version 1 includes a new Wing Holder but not a Spacer (like in the Python Version 2). There is a gap between the holder and the screw which doesn't look good. So I made one and printed in red to match…
This is a switch mount for the Team Corally Torox 185 ESC which I use in my Python Buggy. I moved the switch behind the ESC to use the space next to the ESC for a Capacitor Pack. Print Settings Printer: Sidewinder X1 Rafts: Doesn't Matter…
The Motor in my Corally Python heats up to 95 degrees celsius after driving for 20 minutes continously (50% - 80% throttle). The holes in the back of the Body are ok, but I thought it might be a good idea to optimize airflow. So I…
These gaskets are for the Team Corally Center Diff which I used to upgrade from plastic to aluminum Differential Case: C-00180-686 I designed this, because I forgot to order the original gasket from Corally: C-00180-183-1 One Gasket is…
Created this Shock Piston for my Corally Python. Corally Part number is: C-00180-080 Holes are 6 x 1.3 mm. Used a small drill after printing to create a clear hole with this diameter, but I think it is not really needed if your printer is…
Designed this shims based on the original Team Corally Steel Shims. I used this to shim the wheel hub bearings and suspension arm. 6x11,5x0.2 16x12x0.2 Use your slicer to adjust the thicknes if needed. Print Settings Printer: Sidewinder…
This ring will save the Body Post (C-00180-024) from breaking the Arm Holder (C-00180-017). You will need to have the additional Suspension Arm Mount (C-00180-529) mounted. Printed this in TPU with 50% infill to be a bit flexible, but…
Recently I bought a new Motor Bulkhead for my Corally Python. But this one is dedicated for another Corally car which is 4mm higher than the original one. Corally sell this spacer as well, but it was much faster to design and print it by…
I designed this Anti-Roll Bar Ball Cup as one broke. Similar to the original one, but with a flat side for easy printing. Replaces C-00180-089. If needed, make the hole a bit bigger after printing before snapping the ball ends in. Print…
Here is a brace that fits the Team Corally Syncro 4 series. I have modified the original 6719962 on thingiverse. This version has the center access cutout for easier printing and access. I used carbon fiber petg and it's extremely sturdy.
Team Corally Syncro 4 Body Shell Side Supports. Simple U shaped addons that attach to the sides of the body shell and keep it in place. On the side podes there is an 88mm imprint on the composite piece. I chose this spot for the…
I wanted to upgrade to 40mm fan on my Team Corally Torox 185 ESC. Simple, but works very well. Even on 6s and in summer temperatures, the ESC never did a overheating emergency shutdown. Print Settings Printer: Sidewinder X1 Rafts: Doesn't…
Created this Shock Piston for my Corally Python. Corally Part number is: C-00180-080 Holes are 6 x 1.3 mm. Used a small drill after printing to create a clear hole with this diameter, but I think it is not really needed if your printer is…
