294 models
The famous twenty-sided platonic solid, created in FreeCAD. A platonic solid is a body where all the faces are identical in shape and size, with identical edges and angles, and the same number of faces meet at each vertex. There are only…
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for one variant
A connector to make an icosahedron out of straws. Uses the white part of the straw from boxed milk.
Print approx. €2.23–€2.72 excl. taxPreliminary estimate for one variant
I wanted to 3D print the five (5) Platonic solids for my granddaughter, but could not find on this site. Decided to create and share. Learned a ton by doing it this way. I encourage you to follow this (or similiar) vidoes. I sped up the…
Print approx. €13.58–€16.60 excl. taxPreliminary estimate for one variant
Vespa Cosa Front Brake Cover – Discontinued Part Replacement An accurate reproduction of the Piaggio Vespa Cosa front wheel brake / hydraulic line cover — the trim cover that shrouds the front brake and hydraulic line. This part is long…
Print approx. €0.68–€0.83 excl. taxPreliminary estimate for PETGSource material: PET
A model of a truncated icosahedron sliced at 5/9ths of the diameter. The fractions may be confusing since the diameter is typically measured point to point rather than face to face; joining a 3/8 dome will form a complete truncated…
Print approx. €0.61–€0.74 excl. taxPreliminary estimate for one variant
A model of a truncated icosahedron sliced down the middle.
Print approx. €0.50–€0.61 excl. taxPreliminary estimate for one variant
A model of a truncated icosahedron sliced at 8/9ths of the diameter.
Print approx. €0.90–€1.10 excl. taxPreliminary estimate for one variant
A model of a truncated icosahedron sliced at 2/9ths of the diameter.
Print approx. €0.18–€0.23 excl. taxPreliminary estimate for one variant
An articulated dinosaur skeleton with a removable skull. Triceratops, Styracosaurus Xenocerotops and Diablocerotops skulls included. Easy to print and should not need supports. Print with 2 or 3 walls @.16 layer height.
The model is divided into 4 cards that fit most print plates. The pieces are 2.5mm thick. You can scale them up or down if you need. Once you print the cards you have to break the thin tabs that hold them together and then you can…
Earrings for the polyhedral lover! Earring hardware required. Category: Jewelry Please follow my profile here and my Instagram at https://www.instagram.com/HRM_Studios If you enjoy my work please consider sending me a tip:…
It´s dice for a board games with 20 faces/numbers. Je hrací kostka pro stolní hry s 20 stěnami/čísly.
Its an ICOSALAMP! A lamp with the shape of an icosahedron, made of 20 triangles, 16 of them are the same piece and then we have the top piece and the three that connect to that one as separate elements. Those are separate beacause they…
its a Icosahedron 20 sided dice , it can be used for fun games
3D Print a D20 inside an icosahedron inside a dodecahedron to test water soluble filament. Slice settings on learn guide: https://learn.adafruit.com/how-use-to-pva/overview Print instructions Licence: Creative Commons - Attribution…
To get that Protopasta.com look. Great test print for metal finishing. Enjoy all the colors & finishes at all angles!
Though I've seen plenty of nice modern, geometric planters on the various sites, I wanted to create one with a little more character. I designed this in Tinkercad and the very first print came out nearly flawlessly. You can print this on…
Low Poly Spheres: Low-poly, high-fun! Low Poly Spheres is a series 3D printable models of polyhedra that look like low-poly spheres. You may remember from math class that polyhedra are solid 3D shapes with flat polygonal faces, straight…
A quick and nice geometric shape for decoration or test prints. Ideally to be printed in vase mode (2 parts)
A truncated icosahedron, in simple words just the model of a football. For this print you will need 20 hexagons and 12 pentagons and they will click together, I like printing in detail so I printed this with 80% infill and 0.1mm…
These are the SVG to STL conversions of the amazing Arkham Horror LCG Standees created by Yves Tourigny, uploaded with the artists permission. To find the original SVG files and loads of other amazing work, please visit…
A ring based on nice and clear geometric forms. The ring sizes are: 4: 14.8mm 4.5: 15.2mm 5: 15.6mm 5.5: 16.0mm 6: 16.45mm 6.5: 16.9mm 7: 17.3mm 7.5: 17.7mm 8: 18.2mm 8.5: 18.6mm 9: 19.0mm 9.5: 19.4mm 10: 19.8mm 10.5: 20.2mm 11: 20.6mm…
Cable comb for sleeved corsair cable, may also work with cable mod cables, but I don't have one to test with. If there is other configs that anyone wants let me know.
This object is what I've been printing to display the different filaments I use for products I sell online. The color of the filament is easily viewable from different angles with this shape and I can photograph filament color from…
Description: This is a DnD/TTRPG inspired bin I made for my partner. I first tried to make this with vase mode, but due to the angles the walls would begin to bend inwards. I will include the vase mode STL if you want to give that a try.…
A truncated icosahedron is the only Archimedian solid that does not contain triangles and squares. It is often used to make geodesic structures by subdividing its faces into triangles. The icosahedral polyhedron can also be created using…
Low Poly Spheres: Low-poly, high-fun! Low Poly Spheres is a series 3D printable models of polyhedra that look like low-poly spheres. You may remember from math class that polyhedra are solid 3D shapes with flat polygonal faces, straight…
The faces are printed one by one and connected using pieces of 1.75mm filament threaded into the hinges. The diameter is roughly 21 cm. For testing purposes I uploaded a small version. The fusion360 model can be easily modified. Read…
Un Icosaedro utilizzabile per creare un D20
Ein normales Ikosaeder A normal icosahedron Category: Math Art
Truncated Tetrahedron Cuboctahedron Truncated Octahedron Truncated Cube Rhombicuboctahedron Snub Cube (laevo, dextro) Icosidodecahedron Truncated Cuboctahedron Truncated Icosahedron Truncated Dodecahedron Rhombicosidodecahedron Snub…
This is by far not the easiest thing to do in fusion but it was a nice challenge and it might help some of you ;) Category: Engineering
Icosahedron (20 sided polygon) with face divisions for class 2, frequency 10, spherical projection per method of “Geodesic Math and How to Use It” by Hugh Kenner 1970. This model can be printed with out supports. Also added a smooth faced…
The Level 4 Sierpiński Icosahedron takes fractal geometry to breathtaking heights, featuring four full levels of recursion. Each triangular facet is subdivided into self-similar icosahedra, creating an intricate, captivating design that…
I had the printed using HP-MJF for the black one and SLS for the white one. Made with a very configurable grasshopper script.
This corner connectors are used to join together inexpensive wooden skewers (barbecue sticks) into one of the Platonic solids: Icosahedron ( https://en.wikipedia.org/wiki/Platonic_solid ). This is an inexpensive way to create different…
If you appreciate my work, consider supporting me by buying me a cup of hot chocolate! :) https://buymeacoffee.com/aleksandrs No one doubts the effectiveness of clinical simulation as a method of teaching future and existing medical…
A fun hex egg for easter. Two sizes. 100 and 60 mm tall
The Level 5 Sierpiński Icosahedron Fractal Sculpture features five full levels of recursion, with each triangular facet subdivided into self-similar icosahedra. This intricate design maintains the iconic icosahedron structure while…
Kepler–Poinsot polyhedron https://en.wikipedia.org/wiki/Kepler%E2%80%93Poinsot_polyhedron
1:12 Scale model of a psittacosaurus. The model features detailed scale and skin texturing along the model. I created two variants of the model: standing, and posed. I recommend printing it at a finer layer height or with a resin printer.…
1:35 and 1-10 scale model of a styracosaurus. The model features detailed scale and skin texturing along the model. I created two variants of the model: standing, and posed. I recommend printing it at a finer layer height or with a resin…
WARNING - CHOKING HAZARD! SMALL PARTS! KEEP AWAY FROM SMALL CHILDREN! INTRODUCTION This is a very satisfying sphere using the Hoberman mechanism. It is a truncated icosahedron, with 12 pentagons (5 sides) and 20 hexagons (6 sides) that…
A truncated icosahedron (i.e. buckyball). Read about it here: https://en.wikipedia.org/wiki/Truncated_icosahedron The point of this post is really to share a couple interesting websites I stumbled on that appear to be awesome at…
A connector for making a truncated icosahedron out of straws. The two sockets with flat bottoms are 108° from each other and form the outside of one of the solid's 12 pentagons. All pentagon edges are connected via one of these two…
you will need 12 hubs and 30 sticks to assemble one complete icosahedron. The sticks should fit tight. The large flat face points towards the center. Seems to work well with 0% infill and 2 perimeters
Each circumscribed radius is set to the same. ref) https://dmccooey.com/polyhedra/Archimedean.html Truncated Tetrahedron Cuboctahedron Truncated Octahedron Truncated Cube Rhombicuboctahedron Snub Cube (laevo, dextro) Icosidodecahedron…
This is the 2nd in a series of simple platonic solid designs. They are all a little neighbourhood of the 1-skeleton, rounded on the interior and flat on the exterior. Included .scad file. This allows users to put text on the faces. Print…
A simple truncated icosahedron, and clean file.
Paper drinking straw C60 connector can be found here: https://www.printables.com/model/204151-paper-drinking-straw-dodecahedronc20truncated-icos @ jmckeand did provide many toothpick connectors here ……
I printed @jgentry's model and the tee failed even with a brim. The can fit and the surface finish wasn't to my liking and I thought the ergonomics could be improved. I found Steen Winther 's golf ball model and remodeled the koozie…
This is a recreation of this object from the Metropolitan Museum of Art collection where I tried to match the size, faces and even orientation of the symbols as close to the original as possible. The original was crafted some time during…
Triakis Tetrahedron Triakis Octahedron Triakis Icosahedron Triakis Hexahedron Rhombic Triacontahedron Rhombic Dodecahedron Pentakis Dodecahedron Pentagonal Icositetrahedron(dextro,laevo) Pentagonal Hexecontahedron(dextro,laevo) Disdyakis…
Carved Elk Skull with Bonus Cattywampus Ornate Icosahedron. Because why not. All AI Generated.
Printed using a 0.4mm nozzle at a 0.2mm layer height with Prusament PLA. Basically the Prusa Mini 0.2mm Quality settings with Vase mode turned on. So I wanted to make a simple container for my pens, but using a single wall Vase mode woud…
This is a 3D scan of a dinosaur figurine, it's a demo model from Go!SCAN 3D. I resized and oriented the model and smoothed the mesh a bit. https://www.3dwp.nl
This is my version of a paper lamp. I chose to make it an icosahedron because I like the idea of printing a bunch of interchangeable, equilateral triangles into a big 3D shape. Came out pretty cool over the course of a few days. Lots of…
A lightly armored ankylosaur from Mongolia
Soporte para cosas :-) Print Settings Printer Brand: Anet Printer: A8 Rafts: No Supports: No Resolution: 0,3 Infill: 25 Filament: Elegoo Pla azul Notes: Soporte para cosas :-),practico y original :-))))))) Category: Gadgets
Icosahedron-Frequency3 Sphere puzzle. Constructed from 270 pieces (made up of 5 different shaped pieces, and in 5 different colors). Surprisingly stable build. Print 60 copies of each STL file, except for Sphere-if3e.stl, which only needs…
How to show the structure of boron to pupils? One option is to use 3D printed model :-) The models are small (in CPK variant boron diameter - 12 mm, the size is "compatible" with this molecular set:…
Uses the the Slicer embossing to add your owen markings for a fun d20 dice. Or just admire the geometry of the Icosahedron
Icosahedral Polyhedron created using polyHédronisme v0.2.1 with the polyhedral recipes "tkt5I" or "dkdktI" to create a Geodesic Goldberg polyhedron : Each face is either a pentagon or hexagon, exactly three faces meet at each vertex, and…
This is followup on creating regular dodecahedron with 12 regular pentagon faces, with edges of toothpicks: https://forum.prusa3d.com/forum/english-forum-awesome-prints-hall-of-fame/toothpick-polyhedra-fullerenes/#post-606910 Dodecahedron…
Ref: https://en.wikipedia.org/wiki/Spidron A Way to Derive the Spidron Formulas https://www.gathering4gardner.org/g4g13gift/math/KissGergo-PaperOnSpidron-G4G13_20190724.pdf
It is a lamp shade of a pencil. Things to prepare ● Pendant light ● 30 Pencils ● (3D Print) joint_O.STL x11 ● (3D Print) joint_C.STL x1 ● (3D Print) shade_catch.STL x1 Please print with 3D printer and connect pencil. It may be necessary…
Build your own truncated icosahedron tile by tile. It has 12 regular pentagonal faces, 20 regular hexagonal faces, 60 vertices and 90 edges (wiki). You will need to print 12 pentagons, 20 hexagons and 40 to 60 clips ;-) Print the tiles…
🦖 Cute Little Styracosaurus – THORNY (cartoon, noAMS) Meet THORNY – an adorable cartoon‑style styracosaurus with big expressive eyes, soft rounded shapes, and his iconic crown of long horns that gives him a unique and charming silhouette.…
This is based on a 2,000-year-old game piece/artifact that comes from Ptolemaic Egypt.
Remastered version of my first model.
Icosahedral Virus (T=7) Lampshade This model combines the asthetics of islamic lattice work with the construction principles of quasisymmetric icosahedral virus capsids. Caspar, D. L., & Klug, A. (1962, January). Physical principles in…
Check out the revised model here: https://www.thingiverse.com/thing:3715267 Old Design This a d20 jar I am working on to hold my large collection of gaming dice. This is a work in progress: I have not printed it yet to confirm the working…
the styracosaurus had so many horns all over its face for defence
One Truncated Icosahedron inside another. Category: Math Art *Supports needed to support the inside ball but outside should not need (88 degree support overhang angle) https://www.thingiverse.com/thing:5354381
One of two species of styracosaurus, from the Two Medicine Formation
Icosahedral Polyhedron created using polyHédronisme v0.2.1 with the polyhedral recipe "dk6k5tI" to create a Geodesic Goldberg polyhedron : Each face is either a pentagon or hexagon, exactly three faces meet at each vertex, and they have…
I created models of the standard 12-sided Dodecahedron and 20-sided Icosahedron. There are also two extra variants of each with either slightly smooth or rounded smooth edges. They are all easy to print with no supports needed and great…
This collection features both whole and sliced icosahedrons. An icosahedron has 20 faces and is a polyhedron and platonic solid. For customization, the Fusion 360 file is included with adjustable parameters for height and fillet. For…
Revised model of an iconic Centrosaurine from Late Cretaceous Alberta.
Crocodile relative from late Cretaceous to Paleocene North America and Europe.
This shape is famously recognized as the D-20 dice and the basis for soccer balls (though often truncated—these joint ends effectively handle that for you). To build a full icosahedron, you’ll need 12 of these joints and 30 equal lengths…
Ref: https://en.wikipedia.org/wiki/Spidron A Way to Derive the Spidron Formulas https://www.gathering4gardner.org/g4g13gift/math/KissGergo-PaperOnSpidron-G4G13_20190724.pdf
Well this is pretty much self explanatory. Quite interesting math in there. A cross-eyed 3D view of an explosion view is included in the images. You can watch it in full 3D without viewing aid. Just overlap the two almost identical…
Involves three .3mf files which can be easily printed and assembled. Print 1 of icosahedron.3mf and stand.3mf. Print 2 of pivot.3mf. PLA material, 0.2mm layer height, 25% infill for all the files are sufficient. Cubic infill pattern is…
The Level 3 Sierpiński Icosahedron takes fractal geometry to an even greater depth of complexity, introducing three full levels of recursion. With each triangular facet subdivided into self-similar icosahedra, this model achieves a…
Build an icosahedron from 12 hubs and 30 struts! The node model has a big pentagon shaped base to improve bed adherence. Struts are secured to the hubs with 10mm M3 bolts. The screws may be optional as friction seem to be enough to hold…
Door № 1 SCADvent calender 2021 Print No infill No Supports Brim used Filament used: Flax
Icosahedral Virus Magnetic Model Instructions Use the 3mf file. Pejtamers are split in half for easy printing, they can be assembled with superglue Print with 3 colors on a Prusa XL Add 5 screws (3.0x12 mm) and 5 neodym magnets (5mm…
Icosahedral Polyhedron created using polyHédronisme v0.2.1 with the polyhedral recipe "dkt5daD" to create a Geodesic Goldberg polyhedron : Each face is either a pentagon or hexagon, exactly three faces meet at each vertex, and they have…
The Level 2 Sierpiński Icosahedron builds on the self-similar design introduced in Level 1, adding an extra layer of recursion to create a more intricate and captivating geometric structure. This design features detailed triangular…
Small Triambic Icosahedron! Category: Art
Ceratopsid from late cretaceous North America.
remixed to make them print flat even these are to big for meat skewers so scale down 10% or build with wall post tack blu-tack in the holes to pre hold them. 30 x 36mm skewers wood dowls rods 35 x 44mm skewers wood dowls rods search for…
Watering ball for plants in the shape of a icosahedron Capacity 220ml ============================================= If you would like to support my work you can buy me a coffee Wenn Sie meine Arbeit unterstützen möchten können Sie mir…
There are two files for 3D printing this Archimedean solid: straight edges and rounded ones (my favorite). Print it, share and learn!
This model is featured in figure 2.2 of Visualizing Mathematics with 3D Printing . Category: Math
Truncated icosahedron model that has some faces extruded and some deleted which gives star like sculpture. It needs a propoer supports to print well both in resin and fdm. Have fun printing!
Second revision of a ceratopsid
Ceratopsian from the Two Medicine Formation
