Counting matching models…
Screwless Snap Assembly. Start with base or bottom case, remove ssd and drop Pi4b board into bottom case so that it rests in provided IO openings correctly. Fit should keep board in place even with a little shake. Place…
Print approx. €0.45–€0.54 excl. taxPreliminary estimate for one variant
Added a donation button for the people who want to buy me a coffee. Prusa Mini LCD backcover Protects against dust and dirt and keeps your PCB save Fits exactly Use a 3mm - 25mm screw Nice upgrade Step files included Print instructions…
Print approx. €1.73–€2.11 excl. taxPreliminary estimate for PETGSource material: PET
Updated - July 27, 2024 - added tolerance test and more tolerant sliding covers After receiving a number of complaints about the lid not snapping to the cover and knowing that each individual printer may not be configured to print holes…
Print approx. €0.21–€0.26 excl. taxPreliminary estimate for one variant
Cap/Cover for female Ethernet Ports to prevent dust from getting inside. Easy to print without any supports. You can use a brim if you have adhesion problems. Both, PLA and PETG, are fine. But I would suggest to use PLA, because PETG has…
Print approx. €0.53–€0.65 excl. taxPreliminary estimate for one variant
WORK IN PROGRESS , this is an initial design of the cover. Currently being tested and optimized. Join us, adjust the design and upload your customized cover as a remix. An elastic cover designed to close the gap in the headband, while…
Print approx. €0.79–€0.97 excl. taxPreliminary estimate for PETGSource material: PET
A smart can opener that also works as a protective cover! Use 3 walls, 5 bottom layers + 6 top layers, 0.15 mm layer, 25% infill, no supports required. ✅ Opens drink cans easily – no more broken nails or sore fingers ✅ Doubles as a cover…
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for one variant
(⚠ FIRE HAZARD ⚠) This Lego compatible outlet and light switch cover are perfect for children's rooms or just having fun. Decorate your light switch or outlet cover with Legos, or just have fun and play. Great Remix for rocker switch by…
Print approx. €1.61–€1.96 excl. taxPreliminary estimate for one variant
Easy to 3D print security cover for enhanced privacy with your handy Logitech StreamCam C980. No glue, just click the cover into the frame hinge and mount it on the camera. Easy to open, easy to stay close. Printed in cca 30–40 minutes…
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for one variant
Reverse bowden IR Sensor Cover for the MK3s I have included 3 versions one for the PC4-M10 pass through connector and another for the PC4-M6 connector. I have now added a version for the PC4-M5 connector. Edit 19/2/19: I have added a M5…
Print approx. €0.38–€0.47 excl. taxPreliminary estimate for one variant
The DtM-v3.0 face shield PPE design has been reviewed and approved for use by the USA National Institutes of Health (NIH). See also the design on the NIH website here: https://3dprint.nih.gov/discover/3dpx-013359 Files on this post…
Print approx. €2.84–€3.48 excl. taxPreliminary estimate for PETGSource material: PET
Inspired by the design on tinkercad by örjan https://www.tinkercad.com/things/ejnXN5An6ae And by the design by Polestar itself for a protective snow cover for the chargepoint I designed this. The portrusion is meant to keep snow mostly…
Print approx. €2.52–€3.08 excl. taxPreliminary estimate for PETGSource material: PET
Remix of earlier designed privacy cover. Improvements is that the base/holder fits better on the camera, and the amount of material required is lessened.
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for one variant
Designed to protect the RJ45 sockets of my small Ubiquiti Unifi Flex Mini Switch that sits upright on my desk. Can be used on any other RJ45 sockets… Recomended Material : PLA Nozzle Diameter : 0.4mm Layer Height : 0.2mm Support : YES…
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant
Stormtrooper helmet towing hook cover With this you should be save not to hit anything with your towing hook, it‘s a stormtrooper what should he hit? But if you hit him with your leg, it will hurt. But anyway, it looks cool. Create your…
Print approx. €4.96–€6.06 excl. taxPreliminary estimate for one variant
If you find value in the model provided do consider supporting me with a small donation: paypal.me/Tomax77 Hope you like it ;)
Print approx. €0.13–€0.15 excl. taxPreliminary estimate for PETGSource material: PET
This my take on Prusa i3 MK3S Heatbed Cable Cover. I remixed the angled version so my printer fits better to the Ikea Lack table enclosure. Print instructions Unassociated tags: heatbed cable cover, prusa heatbed cover Category: 3D…
Print approx. €0.78–€0.96 excl. taxPreliminary estimate for PETGSource material: PET
Hi, I always wanted an affordable, uncluttered and reliable mechanical pencil that I can always carry with me. This is the 3d printed solution I came up with. It's a simple mechanism, allowing you to adjust the length of the leads using…
Print approx. €0.34–€0.41 excl. taxPreliminary estimate for one variant
A universal opener designed for cans and pull-tab lids, combining two functions in one compact tool. It helps to easily lift stiff tabs on soda cans and food cans, and when rotated on a beverage can, it also acts as a protective cover.…
Print approx. €0.53–€0.65 excl. taxPreliminary estimate for one variant
Inspired by the model created by Pico, I created new model which better matches size of the original cover and also of the sealing ring (diameter approx. 25.5mm). Model created in OpenSCAD.
Print approx. €0.16–€0.20 excl. taxPreliminary estimate for PETGSource material: PET
A simple cover for multiple socket outlets with standard switches. You need 2 M3x8 screws and some double-sided tape to attach. If you like check out my other designs too! Note: Since the question came up recently, the license states that…
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for one variant
This mask can be used with a piece of textile or cotton pads as filters. You can also use it as a respirator if you have respirator filters. It's better to print with PETG or ABS so you can wash it in a dishwasher. Please print at 100%…
Print approx. €4.58–€5.59 excl. taxPreliminary estimate for PETGSource material: PET
Outdoor cover for the popular analog Capacitive Soil Moisture Sensor v2.0 (according to comments, this also fits version 1.2). No soldering changes are required. I just crimped a JST 2.54 mm female connector on the cable. The cable…
Print approx. €0.93–€1.13 excl. taxPreliminary estimate for PETGSource material: PET
BMW E39 - Sliding cover for the central console storing partition of the BMW E39 Model. Suitable with part number oem 51
Print approx. €2.64–€3.23 excl. taxPreliminary estimate for one variant
I use my GO as a UMPC so a lot of times I don't use or have my controllers connected. I also like my Xbox controller a bit better than the GO's Controllers anyway. This will cover the sides, but I make no promises it will protect from…
Print approx. €1.63–€2.00 excl. taxPreliminary estimate for one variant
I got annoyed by not being able to either print of fit the 90º heat bed covers for MK3. So I took inspiration from the last model that I've tried and built my own version from scratch based on the original Prusa source files.
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for PETGSource material: PET
Remixed Somnium's back cover to be a flat plate to simplify printing and overhangs. Also uses the screw holes for the circuit board to secure the back cover to prevent any rattling issues. Need to use 4 - M3x12mm screws to secure the back…
Print approx. €1.19–€1.46 excl. taxPreliminary estimate for PETGSource material: PET
Overview Easily replace or upgrade your old or broken light switch covers with these precise, 3D-printable wall plates , designed to fit standard electrical boxes. This collection includes single, double, and triple gang configurations…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for PETGSource material: PET
I like to keep things clean and protected, that's why I printed a hot shoe cover a while back then. This worked fine, but the cover did not only cover the hot shoe but also a little mechanism that tells the camera not to allow a usage of…
Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant
Bambu Studio Strength Walls Detect thin wall “ON” Bambu Lab Z axis cover for P1P P1S X1 Thank you ;-)
Print approx. €0.10–€0.13 excl. taxPreliminary estimate for PETGSource material: PET
T-slot covers provide protection from debris buildup and can also be used to manage wires and cables recessed within the T-slot. They can also add a finishing look to your project. So... Since I couldn't really find what I wanted I made…
Print approx. €0.39–€0.48 excl. taxPreliminary estimate for one variant
V2.0 Now available! Snapable and Tighter! https://www.printables.com/model/168793-i3-mk3s-z-axis-dust-covers-v20-snapable ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ I remixed these for my i3 MK3S. They now work…
Print approx. €1.05–€1.28 excl. taxPreliminary estimate for one variant
This stylish pumpkin Halloween decoration looks great during the day and creates a mysterious atmosphere when the lights go out. Simply place an LED tea light in the pumpkin and enjoy the flickering shadows through the voronoi pattern.…
Print approx. €7.93–€9.70 excl. taxPreliminary estimate for one variant
A very simple cover to use a cosmetic tissue box available in the supermarket with a fancier look. The cover is bottomless and designed to put only the cover over the box. I measured my tissue box beforehand and then scaled the cover in…
Print approx. €13.77–€16.83 excl. taxPreliminary estimate for one variant
I lost the litte handle cover, so i made my own. Should also fit on the TM6.
Print approx. €0.24–€0.30 excl. taxPreliminary estimate for PETGSource material: PET
Holds 16 608 Bearings. Yeah, the same ones you have left over from the fidget-spinner craze 🤪 Because these often have a thin coat of oil, I wanted to add a cover to keep them dust-free, but the lid is completely optional The block is…
Print approx. €1.22–€1.49 excl. taxPreliminary estimate for one variant
This handle is thicker than standard handles and has some extra reinforcement ribs on the inner side which makes it unbreakable. Cover for screws is also included. Choose correct orientation (left/right) for your door. For outdoor use I…
Print approx. €0.21–€0.26 excl. taxPreliminary estimate for PETGSource material: PET
GoPro Hero 10 (9) Battery Cover | Cold Shoe Version available Simple and fast to print cover for the GoPro Hero 10 (and 9) to allow charging while recording. Useful for long video recordings or time lapses. The Cold Shoe variant is useful…
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for one variant
Overview: Easily replace your old or broken outlet covers with these precise, 3D-printable wall plates , designed to fit standard electrical boxes. This collection includes single, double, and triple gang configurations for standard…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for PETGSource material: PET
Simple yet effective show drain cover to catch hairs from getting stuck down the drain. You can easily clean it after showering preventing nasty unclogging rituals. Based on previous experience it will hold up for over 5 years even when…
Print approx. €0.77–€0.94 excl. taxPreliminary estimate for one variant
Didn't seem to find a cover for the C920 so made one with inspiration from another user. Recommend using the improved version of the cover which fits better to the camera. Logitech C920 privacy cover improved by siamigo | Download free…
Print approx. €0.57–€0.70 excl. taxPreliminary estimate for one variant
You can donate here: https://www.paypal.com/donate/?hosted_button_id=BTTC6BR69RRAL One version multicolor ( printed on Průša mini), one version embossed. Filament Prusament PLA mystic brown Update 1: Added forgoten chamfer on top Update…
Print approx. €0.74–€0.91 excl. taxPreliminary estimate for one variant
Hi there I hope you are still healthy. Because of Covid-19 pandemic I developed this printable mask. You can print it without supports and it takes about 5 hours to print all parts if you print it with 0.2 layers and 0.6 nozzle. I used a…
Print approx. €4.54–€5.55 excl. taxPreliminary estimate for PETGSource material: PET
An MMU version of the display cover for the Ultimate Prusa case (you can actually use the cover without the casing). New: Since many have asked for it, I made the honeycomb pattern a little wider. Ultimate Prusa casing:…
Print approx. €3.50–€4.28 excl. taxPreliminary estimate for PETGSource material: PET
Hier eine "Abdeckung Heizungsrohr/ Cover heating pipe" mit unsichtbarer Befestigung. Das Modell sieht sehr ansprechend aus und ist für verschiedene Rohrdurchmesser erhältlich. Die Befestigung erfolgt ohne Schrauben o.ä., sondern wird wie…
Print approx. €1.25–€1.53 excl. taxPreliminary estimate for PETGSource material: PET
I designed a door opener to fight aganist the spread of the Coronavirus (Covid-19). You can avoid touching the doorknob with this 3D printed door opener! Please share this design so we can stop the coronavirus epidemic! Print instructions…
Print approx. €2.47–€3.02 excl. taxPreliminary estimate for one variant
Some Inserts for the Prusa lettering on the LCD Cover. I uploaded a test file too, so you can test whether the letters fit inside. If it doesn't fit, play around with the XY compensation. If you like check out my other designs too!
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for PETGSource material: PET
Dvoudílný držák pro uchycení kuličkových řetízků horizontálních žaluzií. Vhodné pro řetízky s průměrem kuliček: 3,2 mm. Rozteč středů otvorů pro upevnění krytky na okenní rám: 25 mm. Print instructions English text bellow Držáček řetízku…
Print approx. €0.20–€0.25 excl. taxPreliminary estimate for one variant
Print with PLA. Rotate model, so no need of supports.
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for one variant
The first Prusa MK3's were shipped with Noctua fans with hideous colors. Hence I made a cover for the Noctua fan as found here: https://www.thingiverse.com/thing:2730049 When Prusa released the new MK3S parts, some modifications to the…
Print approx. €1.43–€1.74 excl. taxPreliminary estimate for PETGSource material: PET
Minimalist interpretation of the classic wave book stand design. Without any overhangs and optimized for good bed adhesion and small print beds Use a brim to prevent warping issues. It will be easily removable due to the round design.…
Print approx. €10.76–€13.15 excl. taxPreliminary estimate for one variant
Clean and nice looking cover for the original transport handles from the original Prusa Enclosure. makes the handles more stable and can also create a nice two color look if you print it in a different color than the handles itself. No…
Print approx. €1.75–€2.14 excl. taxPreliminary estimate for PETGSource material: PET
Easy to print Print instructions Rafts: Not needed Supports: Not needed
Print approx. €0.52–€0.63 excl. taxPreliminary estimate for one variant
Dustcover MK4 / MK4S for Z-axis with hole for additional cover.
Print approx. €0.44–€0.54 excl. taxPreliminary estimate for PETGSource material: PET
This is a variation on a great design I liked that made that made a little too much noise. This one is silent, enjoy,
Print approx. €1.41–€1.73 excl. taxPreliminary estimate for one variant
Update 2: Added a version that is a cover ring that snaps onto the existing Ender 3 wheels so you don't have to print a whole new wheel if you don't want to (less clean finished product but no insert needed.) The cover snaps firmly onto…
Print approx. €0.93–€1.13 excl. taxPreliminary estimate for one variant
A sharp knife is safer than a dull one, but scalpels still scare the stuffing out of me. I mean, I'm not opposed to using them, but the swiftness with which they can make unexpected incisions can be alarming. So I made a cover for a…
Print approx. €1.41–€1.73 excl. taxPreliminary estimate for PETGSource material: PET
This vent slide and handle for the Core One+ allows the magnetic cover I designed for the Original Core One to be used with automatic vent operation on the Core One+. It replaces the vent slide of the original design; all other parts for…
Print approx. €0.73–€0.89 excl. taxPreliminary estimate for PETGSource material: PET
Noctua fan cover/guard for Prusa i3 MK3/S/+ and MK2.5 - Protect fingers and fan... Key features: Protect the fan from damage and filament stringing Tools free mounting, just snaps on Fast printing and Very Light Weight Minimal air…
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for PETGSource material: PET
Cover for STlink v3 with mounted adapter PCB to protect the electonics. Part List: - M3 18mm cheese head screw
Print approx. €1.29–€1.57 excl. taxPreliminary estimate for one variant
See https://www.printables.com/model/67141-ar-15-trailer-hitch-cover-mk-2 for a newer, simpler version of this design. I don't recommend this one. The technological gimmickry was fun, but it has too many problems, and is too fragile. The…
Print approx. €0.10–€0.12 excl. taxPreliminary estimate for one variant
The model has a slightly more ergonomic recessed grip and a cover of 5mm. The cover makes the lower screw a little more stable on the acrylic. You can use the same nuts and bolts that are used for the original.
Print approx. €5.61–€6.86 excl. taxPreliminary estimate for PETGSource material: PET
All credit for this system of cover to toggle switches goes to the original uploader firstgizmo . Big thanks to you, for your model and your share of the step files. I only made changes to accommodate smaller toggle switches like these:…
Print approx. €0.65–€0.79 excl. taxPreliminary estimate for PETGSource material: PET
A simple snap on cover to go onto your ender 3 V2 to change up the color scheme. Download either the desktop inventions logo or the blank cover and add you own logo. Category: 3D Printing
Print approx. €0.63–€0.77 excl. taxPreliminary estimate for one variant
Just another cover for a typical light switch. Print "face down" with no supports. The .gcode file includes a "filament change" pause so you can print two-color if you like. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No…
Print approx. €1.87–€2.29 excl. taxPreliminary estimate for one variant
Updated May 6, 2024: Further simplified print. Now uses the Floating Holes Trick to eliminate the printed “washer cover” part. Share your passion for shooting sports, without attracting unwanted attention from haters. Those who know what…
Print approx. €4.84–€5.92 excl. taxPreliminary estimate for PETGSource material: PET
Description Replacement for battery cover for Soviet electronic games (Электроника ИМ - clone of Nintendo Game & Watch ). Can be used for all game device, e.g. : NU, POGODI! / НУ, ПОГОДИ! TAJNY OKEANA / ТАЙНЫ ОКЕАНА VESJOLYJ POVAR /…
Print approx. €0.09–€0.12 excl. taxPreliminary estimate for one variant
I took another pass at a revised blade cover for Unicorn Hatmaker's Xacto Blade holder , this one is intended to fit snugly, maybe even tightly, and doesn't take as much material to print. I dare say it's significantly more refined than…
Print approx. €0.73–€0.90 excl. taxPreliminary estimate for PETGSource material: PET
Hello! Forgot to add the boot/cap/cover to your RJ-45 cable and you crimped it already? been there, done that. Hope this helps. This is a work in progress (W.I.P.) as it's not the easiest print using FDM printers, yet. Update 2022-09-07…
Print approx. €0.42–€0.51 excl. taxPreliminary estimate for one variant
REMIX RC1 RC2 RC3.1 shield face protection from Prusa without any hole to do in the shield and compatible with any 150 x 150 printer (medium model) REMIX: https://www.thingiverse.com/thing:4233193…
Print approx. €0.75–€0.92 excl. taxPreliminary estimate for PETGSource material: PET
Mein Anhänger steht immer draußen und der Stecker setzt sich mit der Zeit mit Dreck zu. Damit der Stecker immer schön sauber bleibt, habe ich diese Schutzkappe konstruiert. Die Version wurde etwas angepasst, damit die Dichtung vom Stecker…
Print approx. €1.25–€1.53 excl. taxPreliminary estimate for one variant
Wanted to make a more sleeker looking cover of my own earlier uploaded Design Print instructions printed on prusa i3 mk3 with PETG 0.15 layerheight The one I printed in the example is a little different because I added an extra Logo on…
Print approx. €1.27–€1.55 excl. taxPreliminary estimate for PETGSource material: PET
Ich habe das Originale Dwarf Cover Back etwas abgeändert, sodass es etwas leichter ist, und die Wärme besser entweichen kann. Mir gefällt auch die Optik besser. Ich habe durch den leichten Gewichtsverlust keine negativen Veränderungen am…
Print approx. €0.58–€0.71 excl. taxPreliminary estimate for one variant
Designed this simple cover for Meanwell LRS-75-12 model but should work for 24V model as well. Fast and easy print. Protects the terminals from the top, but shouldn't interfere with the wires themselves. You can print it at 0.3 (Draft)…
Print approx. €1.08–€1.33 excl. taxPreliminary estimate for one variant
Print in something that is not brittle, preferably with a brim. There are no supports required as the model features in-model supports itself (between the lowermost plate and the one above). Make sure to enable “detect thin walls” and…
Print approx. €0.21–€0.25 excl. taxPreliminary estimate for PETGSource material: PET
A round drink coaster inspired by a classic manhole cover. The raised surface pattern gives it an industrial urban look while still working as a practical coaster for glasses, mugs, and cups. Useful as a desk accessory, table decoration,…
Print approx. €1.04–€1.28 excl. taxPreliminary estimate for one variant
For pattress boxes (https://en.wikipedia.org/wiki/Pattress) these are two covers: flat cover flat cover with fitting Distance of the drill holes: 60mm Outer diameter: 74mm Printed with white PETG. 0.2 mm Quality 15% Infill
Print approx. €0.35–€0.42 excl. taxPreliminary estimate for PETGSource material: PET
This is a ventilation cover/grille designed for air inlets, outlets, ventilation openings or similar technical applications. The outer size is 280 × 220 mm . The model includes two frame-height variants: 8 mm and 12 mm . The lower mesh…
Print approx. €13.14–€16.06 excl. taxPreliminary estimate for PETGSource material: PET
A cover plate for a light switch. No supports needed - print upside down. Fusion file included. Also see this matching dual outlet cover - https://www.printables.com/model/899115-dual-outlet-cover
Print approx. €1.88–€2.30 excl. taxPreliminary estimate for one variant
Simple slip-on cover for the Hex GS-911 OBD-II port cover. While the device comes with a carry case, this might be useful for those looking to minimise space taken up on an adventure. This is a snug fit; if the tolerances are a little out…
Print approx. €0.33–€0.40 excl. taxPreliminary estimate for PETGSource material: PET
For use with the original CORE One+ printhead cover right lever. Requires 6.4.0+ firmware. Make sure to flip the vent grille for this to work properly per the CORE One+ update instructions! A drop in replacement for the slide from the…
Print approx. €0.86–€1.05 excl. taxPreliminary estimate for PETGSource material: PET
Did mine in black Spectrum 275 ASA filament with 0.4 nozzle and 0.2 layers hight, no support and 6 walls.
Print approx. €1.16–€1.42 excl. taxPreliminary estimate for one variant
https://www.buymeacoffee.com/maxt ---------------------- What? The Z-Top is an alternative lid design for the electronics box enclosure, which attaches seamlessly to your Prusa MINI or MINI+. The Z-Top connects at the base of the z-axis…
Print approx. €1.61–€1.96 excl. taxPreliminary estimate for one variant
I got a webcam cover and it was way to thick, when I closed my laptop it would bend the screen. So I designed my own. I wanted tot make it really, really thin but still strong and good quality. Hope you like it as much as I do. I used…
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for one variant
Oral B toothbrush head cover. Remixed to decrease the size and added drain / vent holes
Print approx. €0.47–€0.57 excl. taxPreliminary estimate for PETGSource material: PET
A cover to prevent the motion detection of the camera to get triggered by heavy rain or snow. Made for Ezviz cameras and fully compatible with the following models: Una protección para evitar que la detección de movimiento de la cámara se…
Print approx. €3.20–€3.92 excl. taxPreliminary estimate for PETGSource material: PET
Got the medallion by pwmodder 2017 on thingiverse, files here: https://www.thingiverse.com/thing:3740645 the cover was made for HD Twin Cam engines, test rode it one afternoon, did not melt down
Print approx. €1.16–€1.41 excl. taxPreliminary estimate for PETGSource material: PET
Printed with 0,2 mm Layers Just 70 Gramms
Print approx. €2.19–€2.67 excl. taxPreliminary estimate for PETGSource material: PET
edited the “60° Heatbed Cable Cover” of "rolli-on-fire": i added a clip on the bottom, mounted with a screw to eliminate the zip tie and close it from the underneath
Print approx. €0.62–€0.75 excl. taxPreliminary estimate for PETGSource material: PET
1. Introduction This is a remix of a remix (Scatterthought) of a good Logitech C270/C310 Focus Ring design. I just add my contribution ;) -Tighter tolerances between ring and cover. -Change the “gear” design to better grip the lens.…
Print approx. €0.50–€0.61 excl. taxPreliminary estimate for PETGSource material: PET
Hello friends from all over the world :) This is my sink strainer / gully cover in the bathroom. The diameter of my sink is 40mm. If someone likes this Design, it would be great if you also give it a like and post a make ;) - - - - - - -…
Print approx. €0.39–€0.48 excl. taxPreliminary estimate for one variant
Hi all. Mine Nespresso C55 U-Milk failed due to failure in snaps of steam cover distributor spout. I modeled a new part and it fits and works perfectly. Original part is made from ABS but I printed it from PETG. Printing instructions:…
Print approx. €1.34–€1.64 excl. taxPreliminary estimate for PETGSource material: PET
After my quite old ebook reader fell down it immediately broke. The material of the front cover was that much brittle, that it even broke into thousands of tiny pieces when I tried to remove it. Even tough the device is now out of…
Print approx. €1.87–€2.28 excl. taxPreliminary estimate for one variant
Cover for the Prusa Mini x-axis end to protect the reel and hide the end hole. When assembling, care must be taken to ensure that the longer part of the cover points to the rear, because the hole in the end is slightly forward and the…
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
Dovetail jointing. Printed without supports. EDITED (03/24/2022): Due to the great interest and requests, I added a part with different diameters of the inner hole. (standard pipe sizes are 10, 12, 15, 18, 22, 28, 35, 42, 54, 64). The…
Print approx. €0.92–€1.13 excl. taxPreliminary estimate for one variant
Print it out and give it to your friends, we will defeat the disease! I gave it to the delivery drivers, these people now have a hard job. V1.1: added a stand inbuild little support V1.2 little better support added a ring Print…
Print approx. €0.16–€0.20 excl. taxPreliminary estimate for one variant
I customized the entry of Gloomsen (https://www.printables.com/de/model/211006) a little bit: thin out the walls, for faster printing add an edge to the cover and thicken it a little bit, to make it easier to remove the cover from the…
Print approx. €0.34–€0.41 excl. taxPreliminary estimate for PETGSource material: PET
Shark fin cover for the roof antenna of your W639. Print using PETG, ABS or similar heat resitant material. Two verisons are supplied. 1. The regular one with thick walls ment for translucent filament and a recess to hold the Sika Flex…
Print approx. €6.61–€8.08 excl. taxPreliminary estimate for PETGSource material: PET
Из-за снега и льда потерялась шапка домкрата. Решил оперативно сделать модель, чтобы поставить ее на место.
Print approx. €1.98–€2.42 excl. taxPreliminary estimate for PETGSource material: PET
This is a protective shield optimised for fast printing on FFF 3D Printers without supports from PET-G. STL models for printing 1, 8 and 10 shields at once. Printing 1 shield (top+bottom) takes only about 1 hour and 30 minutes. Printing 8…
Print approx. €1.02–€1.25 excl. taxPreliminary estimate for PETGSource material: PET
IMPORTANT NOTE: If your battery's terminal(s) / terminal wire(s) get hot you need to ensure the printing material you use for this design will suffice. The included GCODE files assume the use of PTEG. This battery terminal cover is a two…
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for PETGSource material: PET
