Counting matching models…
This is a tool that does an excellent job at cleaning your rod. It clamps snugly on the 8mm 3D printer or CNC leadscrew, you can remove your hands and let the printer do the rest of the work. This is meant to be used on any printer with a…
Print approx. €0.80–€0.97 excl. taxPreliminary estimate for PETGSource material: PET
Recreator3D.com – Turning PET1 Bottles into Filament with Repurposed 3D Printers We’re not just recycling—we’re recreating . At Recreator3D.com , we’re transforming PET1 plastic bottles into high-quality 3D printing filament using…
Print approx. €1.15–€1.41 excl. taxPreliminary estimate for one variant
As of February 14, 2025, the 3DBenchy model has been released into the public domain. For more details, please visit the link below: https://www.3dbenchy.com/3dbenchy-sets-sail-into-the-public-domain/ #3DBenchy is a 3D model designed by…
Why you need this: This is a beautiful print in place set of hinges that will enable your door to open completely. The geared hinge is better design choice because the two pivot points can hug the chamfered frame with a tighter profile.…
After verifying several violations of the original license (CC-BY-NC-SA) applied to my models, I have decided to change the license used for my files. Although the new license (Standard Digital File License) would normally not allow…
Print approx. €0.70–€0.85 excl. taxPreliminary estimate for one variant
Creality Space Pi is a nice filament dryer. However, there is one major flaw (similar to some other dryers, like Sunlu S2) - it does not vent out the humid air. This traps humid air inside the dryer, making it hard if not impossible to…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
OUTDATED VERSION This version is no longer maintained. Please use the current Duender Project: Printables: https://www.printables.com/model/1798903-duender-project-ender-3-to-corexy-conversion https://irbis3d.xyz/ GitHub:…
Print approx. €7.47–€9.13 excl. taxPreliminary estimate for PETGSource material: PET
Unfortunately, it is quite difficult for small children's hands to hold and lick delicious ice cream in summer. The melting ice cream drips, sticks and the sticks are very small and difficult to hold for long periods of time. With this…
Print approx. €4.21–€5.15 excl. taxPreliminary estimate for one variant
The hands from the Creation of Adam by Michelangelo
Print approx. €11.27–€13.78 excl. taxPreliminary estimate for one variant
This is a simple strip to set inside the Ender 3 frame to keep it clean. I printed a fan cover because I heard lots of debris would come from printing. This turned out to be true and I noticed the plastic scraps still got into some other…
Print approx. €1.48–€1.80 excl. taxPreliminary estimate for one variant
THIS IS NOT MY DESIGN I found it on another website and decided to upload it here I also scaled it to be different sizes.
Print approx. €0.62–€0.75 excl. taxPreliminary estimate for one variant
Updated the file to provide a better fit! Based on: https://www.printables.com/model/65918-airtag-wallet-card
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for one variant
The container lid closes very tightly and locks well in place, due to a tiny thread-like design at the end of the bayonet mechanism. This gives the outside of the container a very smooth appearance without any visible gap, while at the…
Print approx. €0.99–€1.20 excl. taxPreliminary estimate for PETGSource material: PET
Screaming Goat Disturbing.
Print approx. €10.16–€12.41 excl. taxPreliminary estimate for one variant
Overview Simple little ice cream cone that can be printed with different "flavors" of ice cream. Printing I printed using two different colors of PLA on the Prusa i3 MK3. The included g-code is setup to print in two colors for the cone…
Print approx. €2.53–€3.09 excl. taxPreliminary estimate for one variant
This gives you a faceplate that can increase FOV and give you that peripheral vision like a Quest Pro. I prefer this “open” design and many others do too. You will have to use a bit of velcro tape and source your own pad. Recommend…
Print approx. €2.46–€3.01 excl. taxPreliminary estimate for PETGSource material: PET
Apart from your favourite filament flavours you will need 5 x 1 mm magnets and optionally a few drops of super glue, to hold everything in place. Here are the magnets I have used, they can be bought pretty cheap on Amazon. If you have…
After receiving a Creality Sprite Pro extruder to upgrade an Ender 3 Pro printer, I found that my touch sensor was hanging just below the hot end nozzle. I found several models via Printables and Thingiverse but could not find one I…
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for one variant
Kids love to play kitchen and of course kitchen sets can get pricy. I decided to make a set that is easy to print and gives the option for kids to “custom order” the snacks that they inevitably bring to you. I would love to see some makes…
Print approx. €0.34–€0.42 excl. taxPreliminary estimate for one variant
I designed a clip to hold the G Sensor cable for the Ender 3 V3 SE printer, as I didn't like it hanging loose. I found another clip that attaches it to the top frame, but it wasn't functional for me because it stretched the cable too much…
Print approx. €1.43–€1.75 excl. taxPreliminary estimate for one variant
Haptic model for the visually impaired, based on the book " Překvapení skřítka Modrovouska " by Markéta Vítková. Read more about the project on PrusaLab's blog .
Print approx. €2.44–€2.98 excl. taxPreliminary estimate for one variant
Bobble the head of your favorite treacherous Air Commander of the evil Decepticons! Get the rest of the needed parts (spring and base) from the linked original Bobblehead models, or use my 3MF file, or print the provided gcode appropriate…
Print approx. €1.60–€1.96 excl. taxPreliminary estimate for one variant
This is a simple cone holder to help while putting the ice cream tub back in the freezer. Print with top against build plate. No brim or support should be needed.
Print approx. €0.74–€0.91 excl. taxPreliminary estimate for one variant
Watch out for your ice cream ****No Need Support****
Print approx. €2.67–€3.26 excl. taxPreliminary estimate for one variant
From the Sistine Chapel, Michaelangelo painted the famous “Creation of Adam” where God touches Adam's hand, while Adam bends his finger lower to show his free will and disobedience. This model is a remix of a sketchfab blend file with the…
Print approx. €8.09–€9.89 excl. taxPreliminary estimate for one variant
The generic purpose of this tray system is to regenerate silica gel with indicator, after losing its absorption capacity, in a Creality Space Pi Filament Dryer or in a Creality Filament Dry Box 2.0 (this was suggested and modified by…
Original file located at: https://www.toymakr3d.com/product/12-jet-squad I wanted to print up the mod, noticed there were missing mirrored objects, colors weren't sorted into proper folders for new (aka the white should really be a light…
Print approx. €0.21–€0.25 excl. taxPreliminary estimate for one variant
DESCRIPTION: This is my take on replacing a stock fan with a 40mm one, making the printer a lot quieter. The difference from other models is that it does not take stock 25mm fan screws but slides over the heat sink and that allows it to…
Print approx. €0.43–€0.53 excl. taxPreliminary estimate for PETGSource material: PET
I acquired a used Creality Ender 3 v3 KE printer. It arrived incomplete, missing the filament spool holder. The previous owner didn’t include it in the package. So, I found a model for the tube of this holder, but couldn’t find the nut…
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for one variant
Design stolen from Deviator2x. Simple, functional, and small. Thanks! The V4 design is a parameterized Fusion 360 model that supports various tube widths. .stl and .gcode files are posted for 60mm wide toothpaste tubes and 120mm wide sour…
Print approx. €1.43–€1.74 excl. taxPreliminary estimate for PETGSource material: PET
Elevate your winter style with our Snowflake Earrings or Ornament! These intricate snowflakes are designed to be the perfect addition to your festive look. Printed to a size that's ideal for earrings, they can easily be assembled with…
Print approx. €0.19–€0.24 excl. taxPreliminary estimate for one variant
A handy thermos cozy thing for Ninja Creami containers. Dual wall design with a large air gap in between for proper insulation. Keeps ice cream tubs cooler and ice-creams unmelted significantly longer Prevents water condensation and drips…
Print approx. €9.08–€11.09 excl. taxPreliminary estimate for PETGSource material: PET
Intro There’s something truly magical about dropping a bath bomb into warm water. It fizzes, it sparkles, it releases your favorite scents while nourishing oils gently shimmer on the surface. The water comes alive — and so does the…
Print approx. €5.96–€7.29 excl. taxPreliminary estimate for one variant
An easy and simple design I started by reproducing the original model on a paper and use it as Canvas in Fusion 360 Then design the spatula using Circles and Splines One Extrusion and a Chamfer after here is the spatula ready to be…
Print approx. €0.40–€0.49 excl. taxPreliminary estimate for one variant
The Recreator3D.com Community Bottle Dryer Prints on a 200x200 Bed Uses a 40MM Fan for Air Circulation To Power the Fan, Use a 5 Volt Fan and Wire it into a 5 Volt Power Cord for a Phone Charger or equivalent. Just make sure to use a…
Print approx. €10.99–€13.43 excl. taxPreliminary estimate for one variant
Just a simple LCD Cover for Creality Ender 3 Neo
Print approx. €0.95–€1.17 excl. taxPreliminary estimate for one variant
Based on a meme, designed in Womp, printed in Warsaw Hackerspace
Print approx. €1.05–€1.28 excl. taxPreliminary estimate for one variant
THE MODELS I PRINTED ARE AT 250% SCALE. BEWARE THE TINY PRINT. This is a model of a creaking that I designed myself. I recommend any filament that can slightly bend, as the left leg goes in with a snap and will break if non-bendable…
Print approx. €1.03–€1.26 excl. taxPreliminary estimate for PETGSource material: PET
This set stores, organizes, and speeds up setup for all the game pieces from Agricola All Creature Big and Small the Big Box . When everything is stowed in the box you can rotate the box in any direction, even upside down, and everything…
Print approx. €4.16–€5.09 excl. taxPreliminary estimate for one variant
This fox figurine captures the clever and agile essence of the fox, with flowing lines and a charming posture. Great for natural scenes, fairy tale dioramas, or as a lovely desk ornament. Printing : Works with both FDM and resin printers…
Print approx. €0.98–€1.20 excl. taxPreliminary estimate for one variant
I recently bought a filament dry box for my TPU filament and wanted to connect it with a PTFE tube, but only found models that had to remove the spool holder. I wanted to keep the spool holder for my other filament and decided to make a…
Print approx. €0.64–€0.78 excl. taxPreliminary estimate for one variant
Hey there! Check out my website to see the latest products I've designed—now available for you! Don't miss out, hit the link and explore what's new! My Shop: https://buymeacoffee.com/cc3dprojects/extras My Website:…
Have used PLA. You can use sand paper on top of rail if wanted. My mission was to create easy to use and build train rails. Save filament Fast print Make lots of track quickly Play and have fun Found out you need to dismount double boogie…
Print approx. €3.35–€4.09 excl. taxPreliminary estimate for one variant
Simple alien creature I sculpted for my upcoming tabletop boardgame, Orbital Station 6. Take care removing supports. I normally use a knippers to carefully cut supports AWAY from mini surface to reduce chance to damage surface as I pull…
Print approx. €1.51–€1.85 excl. taxPreliminary estimate for one variant
Printing done on an MK4S+: PETG 0.25mm layer height Outer brim of 5mm All other settings standard.
Print approx. €6.83–€8.35 excl. taxPreliminary estimate for PETGSource material: PET
The gcodes are exported for a Prusa i3 from the demonstration site for Full Control GCode: fullcontrol.xyz I didn't change anything from the gcodes except from suppressing the initial purge that was done mid-air. The initial path seems…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
⭐ Hit Like and stash it in your collection – your future self will thank you! ❤ Organize your build plates of all sizes in style! This minimalist, premium-looking holder is designed to fit the IKEA SKÅDIS pegboard and securely store up to…
Print approx. €1.97–€2.41 excl. taxPreliminary estimate for one variant
This is a recreation and a funny customization to our printers. If you are a proudly owner of a PRUSA MINI, maybe you would like to have it signed by Josef Prusa, this can happen if you assist to a 3D printing fair whith a PRUSA stand,…
Print approx. €7.12–€8.70 excl. taxPreliminary estimate for PETGSource material: PET
Use tree supports on build plate only. Enjoy your favorite ice cream without freezing your hands. This holder is designed for most popular ice cream pints, providing a comfortable grip while insulating your hand from the cold container.…
The best Filament warmer and dryer in one can now be placed on TOP of the Prusa Core One! The cross bar is only if wanted (Hexagon long stick) for more stability, and 5mm will also do in thickness at the back, but I recommend two times…
Print approx. €1.83–€2.24 excl. taxPreliminary estimate for one variant
I wanted the BRDRC filters to fit in the packaging as well. You have to print the empty box and than you can add the inserts. If you want you can also print the original insert.
Print approx. €2.48–€3.03 excl. taxPreliminary estimate for PETGSource material: PET
NEW UPDATE - The assembly issue has now been resolved! You can now use the “Spill_Unbeveled_Fix” file to assemble the spill to the cone and scoop! If you prefer, you can also use the gcode file provided. Again, apologies for any…
Mounting a E3D Revo Micro on Creality Ender 3 , CR10 , Sunlu S8 and many more printers. Bowden-Setup and Direct-Extruder with Annex Engineering Sherpa Mini ! Silent Setup with 5015 Blower and 40x40 axial Fans. Detailed build instruction…
Print approx. €4.02–€4.92 excl. taxPreliminary estimate for PETGSource material: PET
I got an Ender 2 pro and want to see if I can upgrade hardware, electronics and software to get an E3D Revo Micro running. Make the Revo Micro and the fans fit to the printhead → version with one part cooling fan available at the moment I…
Print approx. €2.35–€2.87 excl. taxPreliminary estimate for one variant
Remixed from ‘Creality Ender 3 Pro - Raspberry Pi 2/3/4 + LCD Enclosure’ by eoyilmaz, specifically v042 for Pi 2/3. Note: This remix only works for Pi 2/3 , not 4. When mounting it to the LCD panel, you should use only 3 of the original…
Print approx. €5.91–€7.23 excl. taxPreliminary estimate for one variant
This model is designed to keep the Logitech MX Creative Console Dial and Keypad in a firm relationship. It provides a very stable platform for the Keypad making selections more positive. I also added Harbor Freight toolbox drawer liner to…
Print approx. €3.55–€4.34 excl. taxPreliminary estimate for PETGSource material: PET
Creating wings in FreeCad and PrusaSlicer, optimized for single perimeter printing. I made some video tutorials, how I create my RC-airplane wings. I do the CAD-part in FreeCad, a free, opensource CAD software. The gluing surfaces are…
Print approx. €2.17–€2.65 excl. taxPreliminary estimate for one variant
This blobfish model brings to life one of the ocean’s most unusual (and meme-worthy) creatures. With its droopy face and squishy form, it makes for a fun and eye-catching print. Printing : Suitable for FDM and resin printers Supports :…
Print approx. €1.78–€2.18 excl. taxPreliminary estimate for one variant
Outlet elbow for smoke extraction laser Creality falcon2 Pro, fit on fan. Design for better air flow. Petg, 0.4 or 0.6mm nozzel, layer 0.2-0.32mm, supports
Print approx. €0.54–€0.66 excl. taxPreliminary estimate for PETGSource material: PET
Model of an empty Ben and Jerry's Ice Cream Pint. The cup has been modeled for reference reasons, but the cap can be printed and remixed.
I bought my son the Lego Creative Bricks box, and loved the lid. https://www.lego.com/en-au/product/lego-creative-bricks-10692 I was less impressed with the cardboard box body. Tinkercad and Prusa Mini to the rescue!
Print approx. €23.25–€28.42 excl. taxPreliminary estimate for one variant
Dies ist eine Ersatztülle für einen knapp 50 Jahre alten Sahnespender. Sollte die Tülle so leicht aufsitzen kann diese entweder lackiert werden (Achtung: Lebensmittelechten Lack verwenden!). Alternativ kann das Modell auch 1-2% kleiner…
Print approx. €1.14–€1.39 excl. taxPreliminary estimate for one variant
If you have found this model I guess like me you have broken your antenna while washing the car, moving a cover or just looking at it the wrong way. So I got replacement then modeled it the best I could to match to the original toyota…
Print approx. €1.83–€2.24 excl. taxPreliminary estimate for one variant
I wanted to remotely measure temperature and humidity inside Creality Space Pi dryer. Also the built-in humidity dryer is not behaving reliable, as it won't go below 15 % R.H. So I used spare SNZB-02 thermometer for this, because it (so…
Print approx. €0.95–€1.16 excl. taxPreliminary estimate for one variant
Creality Ender 3 S1 Pro/Plus Filament holder adapter 2-3kg bearings or use without bearings (cylinder name “tubus 2-3kg use without bearings” ) It is designed so that the coil easily unwinds from the holder and does not tend to get stuck.…
Print approx. €9.53–€11.65 excl. taxPreliminary estimate for PETGSource material: PET
A remix of “The Rocket” Spool Holder by regularlabs on Thingiverse Ideal for small spaces or more efficient printer space for print farms. Designed to mount to 4040 extrusion without the need for additional hardware. The spool is held at…
Print approx. €4.05–€4.94 excl. taxPreliminary estimate for one variant
Brackets to mount a Creative Stage Air speaker on a Vizio D24f-G1 TV using the feet mount holes when it is hung on the wall with a VESA mount. Includes retainer clips to hold the speaker from sliding out the end. To attach, mount one…
Print approx. €0.34–€0.41 excl. taxPreliminary estimate for one variant
A plastic mold in the shape of ice cream for casting a mold made of rubber silicone for casting natural soap.
Print approx. €1.99–€2.43 excl. taxPreliminary estimate for one variant
Welcome to your Ender 5 S1 Raspberry Pi Mount. Very easy, just snaps together, and it only requires 2 m4 3-5mm screws for the mount to chassis and 4 x pi screws to support in the case. Sits nicely in the top front Right corner out of the…
Print approx. €0.68–€0.83 excl. taxPreliminary estimate for one variant
Slides over the existing knob of your Ender3 v2. I call it the Darth Vader's TIE Advanced x1 - model because of the “curved wings” for speedy dialing. Make sure it's nicely horizontally positioned before pressing it down because it's a…
Print approx. €0.56–€0.68 excl. taxPreliminary estimate for one variant
You simply slide it onto the tip of the whipping cream can and Viola! You press down on the button to let whipping cream come out! This would mainly be used for if you're going to spray a lot of whipped cream in one sitting, to make sure…
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for one variant
This fits under the filament run-out detector on the CR5. The PTFE tube runs from the dry box and connects to a PC4-M10 connector attached to the feed end. Screw the connector onto the feed end and then use 12mm M3 button head bolts with…
Print approx. €0.48–€0.58 excl. taxPreliminary estimate for one variant
Ozdobné písmeno K do třídy. Upravte velikost dle potřeby. Tiskněte dvoubarevně kontrastními barvami. Tato písmena jsou navržena jako pomůcka pro tvorbu frotáže. Tohle písmeno můžete použít i jako matrici při tisku z výšky jako u grafické…
Print approx. €3.34–€4.08 excl. taxPreliminary estimate for one variant
Ozdobné písmeno J do třídy. Upravte velikost dle potřeby. Tiskněte dvoubarevně kontrastními barvami. Tato písmena jsou navržena jako pomůcka pro tvorbu frotáže. Tohle písmeno můžete použít i jako matrici při tisku z výšky jako u grafické…
Print approx. €3.25–€3.98 excl. taxPreliminary estimate for one variant
A decorative letter to classroom. Adjust the size as needed. Print in contrasting colors. These letters are designed as an aid for frottage creation. You can also use this letter as a matrix when printing from a height, as in a graphic…
Print approx. €3.28–€4.01 excl. taxPreliminary estimate for one variant
My goal was to create a stable and ergonomic handle, which can be printed with less support as possible. The handle was created with FreeCAD. The handle part of the model was cut in half with the Prusa Slicer, the cut I tried with FreeCAD…
Print approx. €3.72–€4.55 excl. taxPreliminary estimate for PETGSource material: PET
Ozdobné písmeno M do třídy. Upravte velikost dle potřeby. Tiskněte dvoubarevně kontrastními barvami. Tato písmena jsou navržena jako pomůcka pro tvorbu frotáže. Tohle písmeno můžete použít i jako matrici při tisku z výšky jako u grafické…
Print approx. €3.47–€4.24 excl. taxPreliminary estimate for one variant
Ozdobné písmeno M do třídy. Upravte velikost dle potřeby. Tiskněte dvoubarevně kontrastními barvami. Tato písmena jsou navržena jako pomůcka pro tvorbu frotáže. Tohle písmeno můžete použít i jako matrici při tisku z výšky jako u grafické…
Print approx. €3.42–€4.18 excl. taxPreliminary estimate for one variant
Ozdobné písmeno S do třídy. Upravte velikost dle potřeby. Tiskněte dvoubarevně kontrastními barvami. Tato písmena jsou navržena jako pomůcka pro tvorbu frotáže. Tohle písmeno můžete použít i jako matrici při tisku z výšky jako u grafické…
Print approx. €3.36–€4.11 excl. taxPreliminary estimate for one variant
Small animals that lives in your basement. Always hungry, they seek out and consume crumbs that fall from the mouse's mouth. Print instructions I decided not to cut the model and print it at once.
Print approx. €4.71–€5.76 excl. taxPreliminary estimate for one variant
Ozdobné písmeno H do třídy. Upravte velikost dle potřeby. Tiskněte dvoubarevně kontrastními barvami. Tato písmena jsou navržena jako pomůcka pro tvorbu frotáže. Tohle písmeno můžete použít i jako matrici při tisku z výšky jako u grafické…
Print approx. €3.39–€4.14 excl. taxPreliminary estimate for one variant
Ozdobné písmeno G do třídy. Upravte velikost dle potřeby. Tiskněte dvoubarevně kontrastními barvami. Tato písmena jsou navržena jako pomůcka pro tvorbu frotáže. Tohle písmeno můžete použít i jako matrici při tisku z výšky jako u grafické…
Print approx. €3.57–€4.36 excl. taxPreliminary estimate for one variant
This is “3dCatNoob” creation from “Thinigverse”. I am using his design to create a trellis system for my garden. I did not make any adjustment to the design, just wanted bring it over to this platform. I printed the test print in PTEG but…
Print approx. €1.10–€1.34 excl. taxPreliminary estimate for PETGSource material: PET
Ozdobné písmeno C do třídy. Upravte velikost dle potřeby. Tiskněte dvoubarevně kontrastními barvami. Tato písmena jsou navržena jako pomůcka pro tvorbu frotáže. Tohle písmeno můžete použít i jako matrici při tisku z výšky jako u grafické…
Print approx. €3.40–€4.16 excl. taxPreliminary estimate for one variant
As part of my artistic process (drawing, woodworking, etc.) I design, create, and 3D-print my own custom art stencils. Based on the stencils I use in my social media videos , this stencil is part of a new line called my "Creative Stencils…
Print approx. €1.49–€1.82 excl. taxPreliminary estimate for one variant
Ozdobné písmeno A do třídy. Upravte velikost dle potřeby. Tiskněte dvoubarevně kontrastními barvami. Tato písmena jsou navržena jako pomůcka pro tvorbu frotáže. Tohle písmeno můžete použít i jako matrici při tisku z výšky jako u grafické…
Print approx. €3.21–€3.92 excl. taxPreliminary estimate for one variant
“When using a wireless battery pack, you can plug this into the USB C port on the controller to block the bright LED light when playing in the dark. On my controller, I still get a very dim halo showing under the controller's plastic so I…
Print approx. €0.12–€0.14 excl. taxPreliminary estimate for one variant
Coaster / wall art / frottage creation Tento model není určen pro MMU multimateriálový tisk, ale pro ruční výměnu materiálu a změnu barevnosti filamentu po vrstvách. This model is not intended for MMU multi-material printing, but for…
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for PETGSource material: PET
frottage, matrix for graphics, wall art, coasters (two colours)
Print approx. €0.94–€1.14 excl. taxPreliminary estimate for one variant
Ozdobné písmeno R do třídy. Upravte velikost dle potřeby. Tiskněte dvoubarevně kontrastními barvami. Tato písmena jsou navržena jako pomůcka pro tvorbu frotáže. Tohle písmeno můžete použít i jako matrici při tisku z výšky jako u grafické…
Print approx. €3.44–€4.21 excl. taxPreliminary estimate for one variant
Série modelů s orlími motivy byla inspirována třeboňskými orly mořskými, kteří sice jsou k vidění hlavně v oblasti třeboňských rybníků, ale občas zaletí i na Novohradsko a ještě vzácněji mohou být vidět, jak krouží na obloze i nad…
Print approx. €0.74–€0.91 excl. taxPreliminary estimate for one variant
The lower holder is very difficult to remove. This ejector helps here Der untere Halter läßt sich nur sehr schwer entfernen. Hier hilft dieser Ausstoßer It would be nice if you post your make. Thank you
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for one variant
The original design using the supplied case had allot of drag, so I redesigned it to not use the case and this is so much better. It still auto-aligns to the extruder but the drag is drastically reduced. in place of screws you could…
Print approx. €0.74–€0.91 excl. taxPreliminary estimate for PETGSource material: PET
The original cooling fan wasn't strong enough, so I made this stronger version. Printed parts: holder 1x cover 1x spacer 4x Other parts: 24V* 40x40mm cooling fan 1x M3 bolt 4x M5 bolt 2x M5 T nut 2x *You can also use a fan with a…
Print approx. €1.47–€1.80 excl. taxPreliminary estimate for one variant
A side-mounted bracket for the Creality CFS filament hub on the Creality Hi printer. The PTFE tube exits at a slight angle to prevent interference with the spool holder. The holder simply clips on and does not require any adhesive strip.…
A decorative letter to classroom. Adjust the size as needed. Print in contrasting colors. These letters are designed as an aid for frottage creation. You can also use this letter as a matrix when printing from a height, as in a graphic…
Print approx. €3.34–€4.08 excl. taxPreliminary estimate for one variant
Ozdobné písmeno P do třídy. Upravte velikost dle potřeby. Tiskněte dvoubarevně kontrastními barvami. Tato písmena jsou navržena jako pomůcka pro tvorbu frotáže. Tohle písmeno můžete použít i jako matrici při tisku z výšky jako u grafické…
Print approx. €3.57–€4.36 excl. taxPreliminary estimate for one variant
I printed this in PETG on my Prusa Mini+ with 0.20mm layer height and 100% infill. I noticed that after using this cap a bit the plastic on my can of Barbasol was a little bit scratched up so expect that, I'm working on a new version…
Print approx. €0.27–€0.33 excl. taxPreliminary estimate for PETGSource material: PET
Print settings: PETG 20 % Infill 0,8mm Nozzle worked fine 3 Perimters hi zusammen, man sitzt recht viel am PC, da 3D-Konstruieren sehr zeitaufwendig ist. Der ein oder andere dann noch mehr durch die Arbeit am PC. Mein Nacken und die…
Ozdobné písmeno E do třídy. Upravte velikost dle potřeby. Tiskněte dvoubarevně kontrastními barvami. Tato písmena jsou navržena jako pomůcka pro tvorbu frotáže. Tohle písmeno můžete použít i jako matrici při tisku z výšky jako u grafické…
Print approx. €3.71–€4.53 excl. taxPreliminary estimate for one variant
