Counting matching models…
Now also Avaidable as Damascus Steel and Slaughter . Crimson Web version of the Butterfly from Counter-Strike. To assemble it, you have to glue the ornaments on the Handle, or print the multi material version. The separator and the pin…
Tool organizer for Cricut Maker Print instructions Tool organizer for Cricut Maker. Store your cutting tips inside your Cricut Maker. Printed in silk pink PLA. There is also a split version of the model for printers with smaller beds. No…
A NEW VERSION OF THE CASE A V2 is Available HERE : https://www.printables.com/model/1120097-flipper-zero-case-v2 SnapBumber for WifiModule : https://www.printables.com/model/392270-flipper-wifimodule-snap-bumper-v10 i'm learning 3d…
All of us have at least once seen our towel flying because of the wind, well with these clips the beach towel will remain where you left it, I hope you like the idea and the design inspired by waypoints, the design is designed to be as…
Universal pen adapter for the Cricut maker 3. Includes pen distance tool. works with anything up to the thickness of a sharpie. Pen distance tool rest/snaps on to the rail allowing you set a 3mm distance.
This is an insert for the Cricut Maker tray that helps you organize your tools.
NEW DESIGN: https://www.printables.com/model/264994-brembo-brake-disc-v2 Just a Brembo Brake design. It had textures too but Fusion didn't let me export the textured file. Please comment if you have printed it and let me know for any…
Had to print using 2mm raft to stick on build plate. Print with thicker side of the model upward shown in photo, no supports needed. May require some strands to be cleaned up when done printing. You can find adapters on Amazon but why not…
U-scribe jig set for for all common thicknesses. Metric: 12 - 14 - 16 - 18 - 19 - 20 - 22 - 24 Inch: 1/2 - 5/8 - 11/16 - 3/4 Added STP file for your own customization ! 10.9.2024 Added 19mm on demand.
Prints PETG in 0.2mm layer height with no supports, a 5mm brim around adapter helps with bed adhesion. This is suitable for use with Sharpie fine point pens. Print upright with thin part of the adapter touching the build plate. No…
Mat Extension for the Cricut Explore Air 2 which can be disassembled and stashed in the right hand drawer. The handle itself should be rotated by 90° up when inserting it into the door recess and then by 90° down again so that it sticks…
Updates 2020-01-01: Several people have asked for smaller versions of this which will fit on slightly smaller print beds. I have uploaded two additional "mid size" versions. One has no cup on the end, the other has one less tool slot. The…
I designed this to fit onto the door of my wifes Cricut maker so the mat doesnt flex when moving in and out. This is designed for the 12x12" mat, but i also have a design for the 12x24" mat also. i printed mine with split colours so its…
A sample of my upcoming paid pack of climbing holds There are 8 sample holds for you to try which has been brought to you by my generous holiday spirit :) Sample Crimp 1 A medium size crimp with a moderate amount of incut but a small edge…
This is an extension to clip onto the front of the Cricut Maker to add support for the longer 24" mat. Category: Parts
Imagen de representación de Jesús en la cruz. Image representation of Jesus on the cross
I had a novel idea - a font composed entirely of 45-degree angles at maximum. This led to the birth of NoBridgeScript, currently in its first draft. I foresee numerous tweaks and refinements ahead, but the vision is clear: a font where…
I made the design myself in Fusion 360 and sent to print yesterday afternoon. 4 hours in PLA+. And it prints in place with the hinge and it worked great! It's great for burritos, pizza, breakfast sandwiches, ham and cheese melts,…
Keinen Bock slebst zu drucken? Kauf ihn hier in PETG! - bei Etsy….
Prints PETG in 0.2mm layer height with no supports, a 5mm brim around adapter helps with bed adhesion. This is suitable for use with Stabilo 0.4mm fine pens. Print upright with thin part of the adapter touching the build plate. No…
Celebrate one of football’s greatest icons with this smooth, stylized bust of Cristiano Ronaldo. Designed with clean contours and simplified detail for optimal 3D printing, this piece captures Ronaldo’s signature look — sharp jawline,…
Resized to fit the Sylvania family bunnies this sofa chair prints well, looks soft, and adds a ‘lived in’ look.
I've redesigned this model and release it exclusively on MakerWorld: https://makerworld.com/en/models/207490-ams-wall-mounts-v2-0-fits-all-ams-versions#profileId-227597 This design is heavily inspired by the Wallmount for Bambu AMS model…
Needed a way to hold the small Cricut vinyl rolls. Expand as big as needed.
This folding cribbage board houses a standard deck of cards and has a compartment to hold pegs. Print with 0.2mm layer height. Add color changes as needed, and add a pause to insert the magnets. Any material will do - I used PETG so it…
Jiminy Cricket, the Walt Disney version of the "Talking Cricket", a fictional character created by Italian writer Carlo Collodi for his 1883 children's book The Adventures of Pinocchio. Jiminy was originally an unnamed, minor character in…
Printed with Flsun Q5, 0.4 nozzle, 0.2mm layer height, 4 perimeters So have fun printing and please leave a like!
Printed it upside-down for a good top finish. Had to use supports and do quite some sanding for the bracket to be smooth. Recommending PLA as it is easy to post-process.
iCiao a tutti! Data l'ultima challenge sul modello delle Air Jordan ho pensato di creare una lampada remix. Ecco poche semplice istruzioni per montarlo. STEP 0. Cosa ci serve??? Innanzitutto direi di partire da tutto l'occorrente per…
This is based on the official Cricut scraping tool, however I didn't like the design so I made something more fitting for a guy. The edge is chamfered to ensure that it touches the surface evenly. The size of the model is 3.5"L x 3.5"H,…
Update 2026 : Added v2 mount with minor fixes Update 2024 : Added M12 screw with hex head ---------------------------- I've designed this support for Tapo camera C200 / C210 / C220 to be mounted on various baby cribs. Print specs: 0.2…
I've messed around with a new cad/modelling software and just ended up with a pistol somehow… Hardware needed: A bit of 4mm bungee and maybe some tape for the bungee where it interfaces with the lever to avoid too much flex Assembly, put…
My wife asked me for an organizer for all of her Cricut tools. So I made this in Tinkercad and then cleaned it up a little in Blender. V1 is the original file from Tinkercad V2 is after cleaned it up and beveled the edges in Blender.…
Some time ago I printed a box for crimping tool and ferrules - functional, but rather simple. However, I wanted something more stable and so I turned the idea into a case based on the Frog Box v2.0 . The box has a compartment for the…
I adapted Heleplanchiste's Trayextension to make a roll holder for Cricut Smart Vinyl. It is printed in two parts - left side and right side. If you flip the model onto its end, it can be printed without supports. Printed in PLA at .20…
Das ist ein Halter für die Matten von meinem Plotter. In der Mitte befindet sich ein Loch um es mit einer Schraube zu befestigen. Ich habe das PLA+ mit 205 Grad und 65 Grad gedruckt. Die Ecken sind abgerundet und passen sich super an.
This is a simple Volkswagen Script Badge. Usually seen on old VW bugs. In comes in quite small on the print bed. I traced it off of an image. The cover image is an example of what it could become. You will need to scale it up by 5x to…
Added Three Layer STL's of each letter which can be joined in slicer or Tinkercad - the UPPER CASE letters are in a separate post There are two(2) postings of this font face: Lower Case - Letters that can be attached 2. Cap Letters to be…
Hi everyone! This is my first published model and it is a V1. My wife wanted something to hold her cups and tumblers while applying vinyl or etching. There are some commercial options but they are expensive and then the other 3D models I…
These include a taper that fits best with 1/8" (3.175mm) holes. Print multiple slowly with flat faces down and good cooling for best results.
UPDATE 07.05.2023: After several requests i added the versions for the most common tube sizes (10, 12 ,15, 16mm) and for 18mm french cleat bar. :-) A French cleat holder for the (crimper)pliers! Inspired by a model by Mikhail on…
Small scribing block with most common heights for woodworking. 9 - 12 - 15 - 18 - 19 - 22 mm Three models: 7,5 with “springs” inside for better hold pencil 7,5 - 9,5 simple straight holes STEP file included, to make you own custom block.…
Hey there! After I noticed release of the contest, “Contour Duplication Tools” was released, I spent a few days creating a simple, yet effective design. I present to you a very simple, customizable, fully 3D printed compass & wood…
A 5x2 (3u tall) gridfinity tray to store the (quite popular) HSC8 6-4A & HSC8 6-6A ferrule crimp tools, sold under several different brands. I also attached the 5x2 bin (6u tall, 12 labeled compartments) that fits right below to store…
Added Three Layer STL's of each letter which can be joined in slicer or Tinkercad - the UPPER CASE letters are in a separate Post There are two(2) postings of this font face: Lower Case - Letters that can be attached 2. Cap Letters to be…
Update: Jan 19th - Got rid of the aligner tabs, they served no major benefit to the design and overlaps should be more than sufficient. Modular wall mounted vinyl/rolls storage for Cricut, Scisor or any other brand. Print only the Top and…
Remixed the original, because my wives name is different :)
This is a portable pinch and crimp block which can be used with up to 9mm rope, the original is made out of wood and i copied the design which can be 3d printed. I would highly recommend to sand all the surfaces for better grip, i…
I couldn't find this on Printables. This is not my work; I am only uploading with credit to the original from Thingiverse under CC. Original description from creator: Pepperbox used by Percy De Rolo from the Critical Role Legend of Vox…
The Criss Cross planter a neat design that will make your succulent the center of any table. The interior hole is 50 mm (~1.97 in)
A 3d printed climbing hold. Designed to be printed with 100% infill and annealed in salt How I Designed This Designed in blender using sculpt mode and boolean modifiers Category: Sport & Outdoors
This is a device that neatly trims the crimped tops off loaded 12 gauge shotgun shells. There are separate model for 20 gauge and 28 gauge. Mostly this is done to reload shot shells with the appropriate solid shotgun slug, such as the…
I've had a small one of these floating around my desk as a fidget for years, which has led to lots of reprinting as they go missing. The more I mess with a model the more I tend to consider improvements, so here's Emmett's planetary gear…
I made a second version of Fidget Gear - Crispy Sound , which is better in everything. Fidget Gear - Crispy Sound v2 has an improved mechanism when turning the wheel, but the wheel is a bit bigger, the spring has one turn less.
A Sewing Crimping Clip , commonly referred to as a seam pressing clip, is a specialized tool designed for sewers and tailors to hold fabric edges together temporarily without piercing them, unlike pins. These clips are particularly useful…
Full tutorial: https://learn.adafruit.com/crickit-lab-shaker/ Build a lab shaker to agitate parts with PVA supports! This DIY shaker uses an Adafruit Crickit, Circuit Playground Express and DC motor. The speed is adjustable with a…
I liked the idea and found nothing alike on thingiverse. so i made this EDIT: Some people are having issues with the cartridges falling out. i dont know why it works for some people and some dont. To avoid issues i added two test files.…
Woohoo! A new model! :D I made this model primarily in TinkerCad for the 2023 Business Card Holders contest [here] . I just barely finished before the contest closed. ^^" The examples were printed on a Dremel Idea Builder 3d20. No…
2D geometric wolf design for decoration. I think this was the first 2D silhouette that we designed. Enjoy!
Dragon Ball home decor
Cricut Pen holder for Sharpie. Extra fine has been tested, Fine is still under development. It should be adaptable for most pens. Check out the spreadsheet in the Freecad source. Print .2mm layer height, no supports. Flip it so that the…
I was getting frustrated with my mat constantly flopping onto the floor before/after cuts, so I made these extensions to bump out the tray just enough to support a standard 12x12 cutting mat. You can print and many or as wide of clips as…
Nozzle 0.4 Layer Height 0.2mm (Recommended) No supports needed Scale it as you like :)
Cricut Tool Organizer This is an organizational system for the Cricut paper / vinyl cutting system. The Cricut uses different blades and rollers and such for cutting different materials. For a given project, you rarely need more than one…
Lucky 13 Cricket bat If you like it --> press like it :-) Cricket bat for the funny lucky 13 figure. The katana model is from kh4rj0 . Take a look at my models, there you can find some more equipment for lucky 13. Would be happy to see…
This is a rework of some similar models on here to be easier to print and more universally fit larger and different branded ratcheting pliers. Has a recess for the ratcheting latch and a lip on the front to keep pliers in place. Tested…
Ornament hanger for cristmastree
I was in need of a scribing tool on the last set of shelves, so I made this one before I finish the next set going in. This simple scribing tool has two ends to help scribe various surfaces: The ball bearing end is made for flatter, less…
Put on a happy face with this incredibly detailed Joker bust. Capturing the iconic villain’s manic grin and classic suit, this piece is a striking addition to any comic book fan's collection. Designed for easy painting to bring the…
This project features a collection of small 3D-printed plates, each designed with various cutouts and practical templates: Geometric shapes (circle, square, hexagon, polygons, arrows…) Guides for drilling and drawing Stylized world map…
EDIT 2022-07-17: I've made a new, improved version of this. Consider this obsolete. New model: https://www.printables.com/model/243613-battery-adapter-einhell-power-x-change-general-pur I altered the original thing so that i can use…
Simple holder that allows easy storage of crimpers, pliers, and other similar tools. Print as many as you need and combine with 3/8" wood dowels. Included step file if you need to adjust the holes or cleat size.
Cricut maker 3 pen holders for: Sharpie fine point Sharpie ultra fine point IKEA MÅLA pen + Blank holders allow you to create your own custom pen holders. Added dummy cutting tool blank to avoid annoying rattle when cutting tool holder is…
I needed a set of legs to raise my Cricut Explore Air 2 high enough to allow my cricut joy to fit underneath so i designed these. they use the original screws that hold the rubber feet in place. I printed them in PLA with 5 walls and 10%…
Ikea Skadis Cricut Tool Holder Remix
A 5x2 Gridfinity tray for the Iwiss SN-2549 crimping tool. Probably also fits: SN-28B SN-58B SN-025 SN-01BM as these seem to use the same chassis. Versions available: Half-height (3u) - the tool sits about 3mm proud of the top of the tray…
Also in the READ ME.txt file: This version of the Cricket has a slightly larger grip, modified lever with better handles, and a redesigned receiver that allows for low power or high power shots, depending on the elastic draw length. It…
nice satisfying cristallic fidged dragon
I flattened an edge of MoltenLayer's Cribbage Peg for an easy print with no supports. There is a hull base and text for two colour printing using a colour change in your favourite slicer. Use Openscad to customize your name on the peg.…
Temporary note: Hey there! If you loved this design, please consider voting for it in the FLSUN 3D design competition found here: https://flsun3d.com/pages/gallery It doesn't take any time or money, but I'm a high-schooler who would…
This is an insert / organizer for Terraforming Mars: Ares Expedition, along with the Discovery, Foundations, and Crisis expansions, in the larger Kickstarter expansion box (note: this does not fit in the retail box). It has no lid lift,…
A Set of Orphaned OpenSCAD Scripts I wrote that generate pipe fittings of various sorts, was intended as an extension to my other pipe generation scripts . By orphaned I mean I wrote these in 2014 and don't feel I ever finished them. I've…
The Sharpie Fine markers will fit in the Cricut Joy, but the rim is different from the original markers. With this adapter you can use your Sharpie on the Joy without problems. Incl. Fusion360 file
Found this plan, print it and found there was some room for improvement, so I made my own one base on the general idea of it. The main improvement is that you can place this tray in the hole in the middle of the original part of the…
[V3 available now on MakerWorld: https://makerworld.com/en/models/1521236-phone-holder-for-hammocks-tents-rope-lines It's now even smaller and all tolerance issues are fixed] Hammock Phone Holder V2 - Now even lighter! New updated…
The original design (https://www.thingiverse.com/thing:5322891/) has the arms tilting up, I rotated the clip part down 10 degrees so the support arm is parallel to the cricut's platform. Extendable Design allows better support for a 24…
The U-Scribe Jig is designed to make scribing simpler, easier and improve consistancy, It's as simple as Attach, slide, scribe, cut and fit.
This is a WORK IN PROGRESS, I dont think this can be printed yet. WARNING! Update 1, separated the bow, pickaxe, arrow and radio. If you found this useful, please donate what you think it is worth to my paypal.me. Help cover the time of…
A Pica pencil version of DSkolnik offset scribe Block. Deleted the original pencil holder and added a 5.9mm hole for the shaft of a Pica automatic pencil. Fit is snug, and helps to add a little pressure to the pencil. Other than that, a…
This stunning mask represents both elegance and power , featuring a face with perfectly sculpted features and dramatic horn-like curves that crown the upper section. With its mythical and divine aesthetic , this design feels like it…
Are you the owner of an insect-eating pet in your living room terrarium? Has it happened to you that insect food successfully escapes its digestor and makes it loudly apparent? You may have tried to trap him and end his loud preludes, but…
These Count and Crimp trays let you visually count coins for rolling into pre-crimped coin wrappers. Once you have them counted, overturn the tray into your hand then feed the coins into the wrapper. Rather than folding the other side,…
print horizontally / laying down for best stabilty and tight fitting pen
Wanted a logo for my vintage motorcycle. there's a few available on the web, but for some reason they are pretty pricy for such a small piece. Print is a tad thick, but I liked the extra 3D dimension. Printed using PETG (or better) so it…
Crimper holder for Honeycomb Storage Wall and Multiboard. Should work with IWISS SN-28B, SN-48B, or similar crimpers. I wanted a mount that held the crimper while open, to avoid having to close it every time. Settings Print upright…
This lamp is a cheap knock-off of ... er, rather ... is a beautiful design inspired by the popular Voronoi Lamp ( http://www.thingiverse.com/thing:584714 ). All of the overhanging surfaces are at exactly 45 degrees, so it prints without…
Each stack can contain 14 Cricut pens. I used PLA in 0.3 draft mode with my MK3S.
A small crib that was designed to hold KUMATY bears but can be scaled to needed size Organic supports work well if you don't support the begs of the bed, my setings are in the 3mf file.
![Business Card Dispenser [read description]](https://media.printables.com/media/prints/370575/images/3157987_7211067c-1b03-4467-8607-b4521b0269d0/keeppic1-2.jpg)
![[Obsolete, see description] Battery Adapter Einhell Power X-Change General Purpose](https://media.printables.com/media/prints/98138/images/995211_146f8637-c194-46c0-8805-e848ebb6f784/50b86a246f04e58914ef95d404af139e_display_large_98.jpg)
![Hammock Phone Holder V2 [Old version, check description for new one]](https://media.printables.com/media/prints/582669/images/4663470_91478c1f-81a2-4074-8058-87f119204b7e/lighterhanger-v21.jpg)
