Counting matching models…
Knives, forks and spoons are stacked on top of each other to save space. Each section has cutlery icons for easy identification. Minimum drawer depth of 9cm required. Designed to provide the maximum storage space with the mini filament.…
The generic cutlery holders will probably fit most cutlery (I designed them to fit an Ikea set). There is also one designed specifically for the Muji set. It is able to hold 12 sets. The knife holders are probably too specific to this…
I made this cutlery organizer for spoons, knives, and forks. Thanks to @HD_218561 for inspiration from Catch-All Trays / Desk organizer This organizer also has a compartment for small spoons or forks, with an additional compartment for…
Organize your drawer content - cutlery in kitchen or tools in your workshop. All sections are generated in basic module grid of 59 mm x 59 mm, e.g. section 1x3 will be 59 mm x 177 mm big. Thanks to this you can freely build your organizer…
The Credit Card Cutlery Kit is a compact culinary companion crafted for convenience and cleverly concealed within a credit card frame. The size of a credit card, the kit fits in your wallet and can be used in an emergency when you forget…
I wanted to have sorted all the cutlery but haven't found any Gridfinity models for it, so I tried to create it myself. I created some forms for bigger spoons, normal forks and knifed. All step files, so remixing should be doable, if…
A simple screw top container for camping cutlery. The top cap mimics a nut in order to make it easier to unscrew while preventing the tube shaped container from rolling. The cap can be customized with a name using simple applications like…
Fully modular Cutlery Organizer. It uses the the Gridfinity system. This can be printed in any material, on any nozzle size, at any layer height. You may need a brim depending on the layer adhesion of your specific printer/print bed. This…
A compact cutlery container with screw-on nut shaped cap to prevent it from rolling off the table. This is an upgraded version of my previous model ( https://www.printables.com/model/258220-camping-cutlery-box ) The upgrades include…
Update 7 Mar 2023: Added another version V2 that has a hole opening instead of open V slot. ***** Printed this https://www.thingiverse.com/thing:3606705 and wanted a drainer to go along. The original 3D model has been taken down, and all…
This caddy is perfect for those backyard cookouts or any informal dining table. Holds ample amounts of cutlery, napkins and condiments/seasonings. Two sizes 180x180 and 210x220. Will easily rotate on a hard surface, but optional rotating…
for my Dishwasher i have created 180x60x132 Print instructions I have printed it with "Black EasyABS filament 1kg - Diameter : 1,75 mm " Works fine ;) Don't print it with PLA for dishwasher!!!!!! :D
v10 update: better serrated edge and toothpick For use when you don't have any utensils but have a 3d printer nearby. Same length as a credit card so you can put it in your wallet. .f3d and .step files are included if you wish to modify…
Recommendation: Supports: on Infill: 10-15% ……………………………… Print however and with whatever you are comfortable with.
*Updated: Replaced version of Knife bin 2 v1 (now v2) and added Junk bin v1 and Straw bin v2.
Keep your kitchen drawer organized with this set of Gridfinity-compatible cutlery organizers, remixed for ease of printing and better fitment of cutlery. Whether you need a spot for forks, spoons, or knives, this set has you covered with…
Simple cutlery drainer. Print the drainer with supports from the bottom.
💧🍴 About ⚠ The cover photo features version 1. 📸 The rack's design is based on a contoured base tray with a sloped interior. A fixed drainage spout is mounted at the lowest point of the tray, extending beyond the base's edge. When placed…
I wanted a cutlery tray but wanted to avoid printing big pieces due to bed size limitations so I thought about doing it in a more modular way. These were planned for a drawer with 288mm x 495mm x 80mm but I think we can have some room to…
A modular cutlery organizer with T-connector T-connector slide L-connector Slide box A simple piece of wood (or a custom printed wall) can be cut to length and combined with the connectors. The slot wor the wood is 5.5mm wide, 47mm tall…
Voronoi Cutlery Organizer
This is a specially designed aeroplane for attaching a spoon or fork or knife at the end of it. Makes for a great simple print for your kids (or yourselves if you're avgeek enough!). This does require a customised hole to be made on the…
Gridfinity bins to store cutlery. Edit 2026-01-06: Added a 4x2 version.
This compact and durable cutlery travel box comes in three different sizes to accommodate various utensil lengths. Designed for convenience and sustainability, it's ideal for carrying your cutlery while on the move. Whether you're packing…
The cutlery travel box has 3 different sizes to fit your cutlery length. The case slides over the box and keeps your cutlery securely in the box. It can be printed without supports.
I printed this with PETG and 0.2 layer hight. Changelog: 18.09.2025 Optimised for better printing. Improved the wall thickness ----------------------------------- Das Model wurde mit PETG und 0,2mm Layer höhe gedruckt. Changelog:…
Custom cutlery tray made for my drawer Width: 310 mm Depth: 383 mm Tall: 50 mm The 3mf file contains the model divided in 4 parts that fits on the bed of a Prusa MK3 for example. You can print it hollow except the bottom part, I used a 5%…
Gridfinity modular cutlery organizer for old Ikea 40cm drawers, can probably be adapted for 60cm and other drawers. Built this way because i wanted to get rid of the old cheapo wobbly organizer get sort of an even closed surface. All…
Print all or print just the biggest organizer
Intro: i got inspiration at print from Maciey, but i needed different properties. so i have created my own model (Blender file attached) Characteristics: inner area: all edges rounded, including inner bottom corners ! → ✅ easy cleaning…
This practical folding cutlery set includes a spoon, fork, and knife, connected by a central screw mechanism. Thanks to this design, the utensils can be easily folded into a compact shape. Overall, it’s a simple, lightweight, and…
Check dimensions before printing. Simple customizable cutlery organizer. Rounded edges for easy cleaning. This is a sample .stl file. For customization you need to edit the .scad file in OpenSCAD. Print instructions Print in natural PLA…
Maybe you don't want to go the route of specialized Cutlery Organizers but just want to use Zack Freedmans Open Gridfinity System to organize your cutlery! Take these models as an inspiration - you can just grab yourself a free copy of…
This cutlery tray now uses the whole height of the drawer and has more individual separation for small stuff you usually need in a kitchen. The larger models have “wings” to prevent warping. Just cut them off after printing. No support…
Simple camping or survival cutlary set. Its very handy and compact. To stack it together put the Fork on the Spoon and stick the Knife thru both from the Spoonsite. it is strong enough in PLA but would be the best to pringt it in PETG or…
I made this as I was never happy with the choises of drawer inserts at IKEA. It's made to fit in a standard IKEA kitchen drawer with curved sides. You can easily adjust the measurements in your slicer to fit any drawer in any…
Modified spoon, fork, and knife models from Thingiverse for people who wish to loose weight for the summer.
Español: El objetivo de este soporte es poder fijar a él cualquier tipo de cubierto, e incluso otro tipo de utensilios y que quede sujeto a la mano para aquellas personas que por sus dificultades motoras no puedan realizar una prensión…
Helps free up space on your worktop while keeping cooking utensils close at hand 😊 Size: 160 x 120 x 200 mm Layer High: 0,2 mm Support: No Filament: PLA or PETG
Printed on - BambuLab X1CC Material - PLA marble (BambuLab) Layer height - 0.2mm Number of walls - 2 I'm also uploading .sldprt if someone would like to change the size.
Made this model to store cutlery under the sink in the bar kitchenette to save space. This model uses screws to mount it to the cupboard door but could also be attached to a wall. The Tea Spoons are raised to bring them to a similer…
Model Link to Edit Frame parts: scale 100% xy compensation -0.7mm try parts: 100% scale xy compensation 0mm all frame parts are symmetrical, so do not forget to mirror corners to get all of them front holes are for magnets, however in my…
Modular Cutlery Organizers 5x5 cm 25x5 cm 20x5 cm 15x5 cm 10x10 cm Customizable
Heyho I thought about how to organize cutlery well. I think most of the solutions for drawers are quite good :) So here I have a solution for other places where you want to store your cutlery or other things. For example, on the wall in a…
This is a simple remix of a design by daniel.g68 @d_mg_305332 . It's designed to be slightly longer but low-profile, so you can stack longer items on top of each others, while still organizing them individually. It can hold Straws…
4 M3 Screws needed, it should be printed with something heat resistant like ABS/ASA
Hello, Today I have Chopsticks for you. Can't you eat with classic chopsticks? Are you tired of it? Here is the solution! They are really great and work well, I ate a lot. :-) Happy printing! I used PLA/PETG as the material. You need to…
A handy tube container for carrying cutlery in a backpack without the risk of damaging everything around it. Can be printed with regular and flexible materials (TPU was used in the pictures). I modified an old design of mine to use less…
Rotate the model by 60° to make it fit on the buildplate. I recommend more than 3 outline Perimeters to prevent the teeth from breaking. Post-Processing, before using it in the kitchen!! I combined two drainer designs, which I was happily…
This is a modular tray system to organize your cutlery drawer. It was designed to fit a IKEA Maximera drawer, but being modular can fit other drawers and purposes too. The pieces are connected each other using snap connectors. Align the…
A simple cutlery drying rack.
UPDATE 01.03.2022: Alternativ für gerade Oberflächen habe ich noch die vier Fußteile abgeändert und hinzugefügt. Zusätzlich habe ich noch Befestigungsklammern für den Korb hochgeladen für zusätzliche Stabilität. Alternatively, for…
The cutlery basket of our 10 year old dish dryer was broken and I could not find a replacement, so I designed my own. material : PETG supports: yes
The base has holes for 6 x 3 magnets They are not necessary but I like having them. 08-02-2024: Added blank versions of the top pieces incase you don't want the words
This is a cutlery organizer for the kitchen drawer. The organizer is designed to accommodate a large number of cutlery. It consists of four parts and to print it you need a printer of at least 25x21 cm, such as the MK3S. The printed parts…
Backstory I kept seeing my circuit breakers with all the gaps/holes each time I did my laundry. I couldn't find an existing breaker size that fit my particular set of breakers. I designed this from scratch in Alibre Design Pro, with some…
I was inspired by this model by CuriousMint, but it didn't perfectly meet my needs so I decided to start my own model from scratch. This model consists of two parts that fit together (I also glued them). I printed both pieces vertically.…
Ikea Maximera 40 x 37 Cutlery Designed to take all Silverware in small drawer. Befor that, I had used 2 drawers for this stuff, now only one :). This Part can be printed in 4 piece parts and glued together. Glueing is optionally, in…
This is a remix of xtommmik 's model. The original had tabs to hold cutlery. I was not fond of this as it limits the cutlery size that can be used. As for the remix, I simply removed those tabs for more versatility for my use. Hope it…
Gridfinity cutlery storage, probably won't work with yours Step files included
Organize your kitchen with gridfinity. I provided a 2 ways to print this as: 2 pieces - gridfinity_cutlery_box_top.stl and gridfinity_cutlery_box_bottom.stl - it has integrated tabs one piece - gridfinity_cutlery_box_one_piece.stl - if…
Modular cutlery organizer. All modules are joined together by the connecting pieces into one unit. Dimension is 36x47x6cm. Step file is included = you can modify the model for your needs. All blocks are adjusted for Prusa Mk3 plates. PLA,…
A simple, sturdy hexagonal-style cutlery tray 145l x 130w x 125h mm No supports needed You can resize to your slicer… As a simple feedback for the work, thank you for liking and posting your making! I'm always happy to see your prints…
This is everything but fancy…and that's ok because it does the job. When you have your knives or spoons that are getting stuck in your dishwasher basket, that's a quick solution. The grids are small enough to be printed quickly and can…
Print it using PLA +, PLA T, PP or PETG. 0.28 mm layer height. No supports required. 3 perimeters. Note: Added a small tray in case you want to print it on an Ender 3, for example.
Going to be making some of my favorite scooby villains starting with Captain Cutler. Printed on a Ender 3 pro.
Both versions fit perfectly next to each other in our cutlery tray and hold a lot more cutlery than flat holders thanks to the slanted design. Beide Versionen passen perfekt nebeneinander in unseren Besteckkasten und fassen durch die…
I designed this organizer to improve my trolley IKEA RÅSKOG The main one holds: Forks, Knifes, Spoons, Tea Spoons and 2 Guzzini salt jars plus miscellaneous such as cup opener and scissors. The second one must be printed, if you like it,…
This attachment is basically a backpack for popular stainless steel drainers (like Ikea's ORDNING). If your drainer is 12cm in diameter, it will fit just fine. I printed it right side up with supports enabled.
Our Custom Cutlery Drying Rack is purpose-built for streamlined kitchen functionality. It consists of two essential components: The Rack (Four Compartments): Varying compartment heights accommodate different items. Organize cutlery,…
This is a cutlery drainer designed to hang from a (max) 6.5 mm wire or part of a dish rack (such as in the photos) and drip into a tray underneath. The main, larger compartment measures 190 x 160 x 71 mm , fitting for tablespoons and…
Everyone loves hexagons, now hold your utensils with one.
More models available on my Makeworld page. Search for my nick "kjbturok". If you like my designs give me like and share. If you like them a lot invite me to a coffee. https://www.buymeacoffee.com/kjbturok…
Repairkit for broken cutlery basket. Dimensions: 56x38mm. Because of the higher tempertures it should be printed in ABS/ASA.
THIS IS A ROBUST BOX TO TRANSPORT YOUR CUTLERY WHERE YOU WANT THIS IS NOT THE LIGHTER MODEL EXISTING BUT IT IS VERY ROBUST AND DURABLE IT IS PREFERABLE TO PRINT IT IN PLA BUT THERE IS NOT OBLIGATION BECAREFULL TO CHEMICAL PARTICULS, CLEAN…
The Kids' Cutlery Box is a creative and safe toy designed specifically for little hands and curious children. This playful design encourages imaginative play in the kitchen, allowing little ones to engage with replica cutlery pieces.…
Travel Cutlery – Compact Set A practical travel cutlery set designed for anyone who wants to have their own utensils always at hand. The set includes a knife, fork, spoon, holder, and a screw lock that keeps everything securely together.…
Ein Trenner für den Ikea Ordning Besteckständer mit 13,5cm Höhe in 3 Ausführungen. Unterteilung in 2, 3 oder 4 Fächer. Inspiriert wurde ich durch: https://www.printables.com/de/model/10226-divider-for-ikea-ordning-utensils-holder Ich habe…
Ho eliminato il fondo del raccoglitore d'acqua x evitare se si accumuli nel suo interno ,cosi l'acqua scola direttamente nel lavello .
Update V4: mise à jour pour tenir en une seule pièce, il n'y a plus besoin des clips pour tenir l'égouttoir vertical. Les crochets ont été agrandis pour mieux tenir accrochés. Imprimé en PETG avec buse 0,8mm, hauteur de couche 0,4mm,…
Do you feel you spend too much time looking for cutlery and too little time on the actual table setting? With this cutlery tray, you stay organised while the 3d printed plastic makes everything feel satisfyingly DIY. Amazing alternative…
Compact Camping Cutlery Set (Knife + Fork) – Print-in-Place Frame A lightweight, one-piece printable camping cutlery set that includes a knife and a fork connected in a sprue-style frame. Designed for easy printing, transport, and…
With this container set per piece, the set can be adapted like a puzzle, allowing it to be combined and adapted to the space of the drawer or place where the cutlery is housed. The height of the pieces is 35 and 55mm, I will include an…
A modern cutlery drainer with three compartments, designed in a clean Japandi style. The model is easy to print and requires no supports. The bottom of each compartment is slightly sloped to allow water to drain away more easily. Standard…
If you find that the compartments of the Ikea Stödja cutlery/silverware tray are too large, or if you have more cutlery types, you are not alone. These two dividers can split some of the compartments in two longitudinally, and are easily…
Little compact Drawer Tray for Ikea Data cutlery. It does fit the whole 24pcs set. There is also a little extra compartment. Expect long printing times! Print on images is printed on a Prusa MK2 with 0,3mm Layer Hight
This remix has 2 items: Very simple wall between to use with the connectors, that you can print without top and bottom layers to have a nice design with the bare infill. This wall is parametric, in Fusion 360 file, you can select the…
einfache stabile Abtrennung für Kleinteile in den Ikea Schubladen mit UPPDATERA Besteckkasten in verschiedenen Größen kein Support nötig
This model is inspired by some of the shapes I've been trying out in other projects. I like the idea of having nice slim organizers that can still snap together and be a little bit modular with the potential to add more items in the front…
Honeycombed cutlery drying rack.
For broken grids or the ability to put your chopsticks into your cutlery basket I've got these grids for you. Usable in a Whirlpool (Ikea) DWH B00 Dishwasher. You can also buy a new cutlery basket ;-) Originally part number: 481931039859…
Perfectly adjust the dividers inside of the base part as well as the side drawers! Using this configuration, you can adapt the cutlery organizer to your drawer within a large range of sizes! I've also included all dividers ranging from…
It's a classical cutlery rest to functionally decor an oriental style dining desk. The design is inspired by traditional portals you can find in Japan called Torii This model is designed to be used with european silverware so if you…
Modular cutlery tray made of four items: Main tray with dimensions 210 x 220 mm for forks, knifes and spoons (Exists with honeycomb and solid bottom) Long tray with dimensions 210 x 70 mm Short tray with dimensions 115 x 70 mm Big tray…
This model allows you to store cutlery (knives, forks, spoons etc) for drying next to your kitchen sink. Could also be used in the bathroom if the drain plug
Palmar cutlery clamp for use at home or in a care environment, where they give independence to people with limited mobility. Pinzas palmares para personas con movilidad reducida que favorecen el agarre a personas con problemas de presión…
