Counting matching models…
I noticed that mil-spec grips were a little loose on the MacDaddy 2.0 platform. This had caused my lower receiver to crack around the trigger guard. The grip receiver on the MacDaddy 2.0 (photo 1) seems to be a bit thinner than mil-spec…
UPDATE 2026 Stepfile include OEM part WE Nozzle G17/G18 Hopup unit WE G17 Manual Bolt Spring Wire 0.5mm OD 6mm Length 100mm
Battery Daddy Replacement Back Panel AA holder for Battery Daddy organizer. You will need to remove the spacers/stabilizers from the original organizer. Most of mine broke off when I dropped the organize, but I did I have to remove one…
This is a decoration for a shelf, home, apartment or a motor home. if your name is Daddy
Print-in-place articulated Scrub Daddy sink holder designed for easy, support-free FDM printing. Prints in about 2.5 hours and uses roughly 45 grams of filament . Articulated legs hang over the sink edge, arms support the sponge, and a…
Designed this scrub-daddy holder to rest on the metal wire drainer of my kitchen sink. Can also be used to hold other scrubbers/sponges of a similar size. The design features: Rounded design to suit a normal scrub daddy, with a fair bit…
Just a Scrub Daddy sponge holder with some add-on for drainage into the sink. Print needs supports, so print in the orientation that works best for you. ______________________ As a special treat I colored the model as ScrubBob (or…
Scrub Daddy Holder — Minimalist A simple holder designed to keep your Scrub Daddy elevated, dry, and ready for use. Drains perfectly into your sink and not on the countertop- also making it easy to clean as opposed to some holders that…
Print without supports, brim and raft are optional. (P.S. It looks hilarious.)
I replaced the empty portion of the original mesh so that I could make changes. This should assist anyone else wishing to make modifications. I made it hold a 5x30 hex-head metric bolt because I had one nearby and couldn't find a…
I needed a container to hold my sponge with some air holes. It’s a snug fit so the sponge doesn’t fall out. The feet are separate so before slicing, separate model and arrange it all on your print bed, then you can glue the feet on the…
This is the Scrub Daddy Sink Ensemble. It is a collection of models that allows you to print and then assemble your own sink caddy. It's a modular design, so feel free to swap holders between the two mounts provided. Assembly is easy. The…
Description Add a splash of character to your cleaning station and keep your Scrub Daddy proudly on display. Functional, fun, and full of Stitch spirit! Elevate your cleaning game with this custom-designed Stitch Scrub Daddy stand – the…
Highland Cow Scrub Daddy Holder. Drains out of mouth. I keep all my models free for personal use, if you wish to support me you can buy me a coffee! https://www.buymeacoffee.com/honeybunny3d If you would like to sell my models please…
Summary My "Hello World" project in TinkerCad. A paddle, with "Daddy" embossed, and thru-hearts. It is ... effective. Print Settings Printer brand: Bambulabs Printer: Bambu P1S Rafts: No Supports: Yes Resolution: .2 Infill: 50% Filament…
This model is a Scrub Daddy holder designed for a kitchen sink. The holder features a compartment to neatly store the sponge and has a funnel on the base. This funnel allows any excess water from the Scrub Daddy to drip directly into the…
I saw the various holders and none could be easily adapted to fit my sink lip so I modeled one with parametric values for a ledge. I have included the fusion files and all you need to do is change the parameters to suit your needs. I…
• PLA/PLA+/PLA Matte/PETG/ • 0.4mm nozzle • 0% infill + 3 walls That's it!
I needed more storage space for my AA Batteries and have no D-cell devices, so made an adapter to hold 3 AA's
What is it? Well, it's a drying tray for those awesome Scrub Daddy or Scrub Mommy sponges! Why? We use these sponges in our kitchen but didn't really have anywhere to store and dry it. So, like a lot of us 3d printer types, I decided why…
The Scrub Family Caddy I wanted to design something that can be modified to fit most suction up sizes. Suction cups I used were from Walmart, size small. I don't know the exact product as I bought them years ago. 4 MM Diameter of suction…
A holder for your Scrub Daddy that will drain into the sink. Gap from the edge of my sink to the wall is 5 13/16 inches or roughly 147mm so it should work for anything that size or smaller
In-sink holder for the Scrub Daddy Dish Daddy, Dish Wand, Soap Dispensing Dish Brush with Drip Stand. Printed in PLA and secured to sink wall with 3M VHB Tape. Like the freebie? Please Rate and share your Make 😎
I noticed that mil-spec grips were a little loose on the MacDaddy 2.0 platform. This had caused my lower receiver to crack around the trigger guard. The grip receiver on the MacDaddy 2.0 (photo 1) seems to be a bit thinner than mil-spec…
A minimalistic Srub Daddy sponge holder: easy to print easy to clean Draining grid to dry the sponge overnight Enjoy cleaning!
We use AA and AAA batteries more than anything. So, I customized our battery case to hold more AA and AAA batteries. Used PLA to print.
This is the same as the original adjusted to hold a thicker sponge. The original has been in my sink for about 3 months. It seems to be holding up well. I printed this in PETG at 0.2mm layer height, 3 walls, and 10% infill. The Fusion 360…
Printed with PETG at 0.2 mm, 25% infill with Tree Supports.
You will need this suction cup from Amazon (NOT and affiliated link): https://www.amazon.com/dp/B0BWM24F3G?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1&th=1
A 3d model of the helmet of subject delta from the Bioshock games made by commission the model is designed for printability and has slots for LED's as lamps - the window and lamps can be covered with 3mm plexiglass cutouts the full helmet…
Print with PETG for liquid resistance. Fixed mine to the sink with 3M VHB Tape. Pictures show slightly different version.
100x160mm sign. reading “Daddy's little Pickles”. Created for a relative's backyard cucumber plants, along with the Keep Off sign Mesh and Solid models provided. The solid version might be an easier print. Best with color switch above…
A sturdy stand / holder for drying and storing your Scrub Daddy or Scrub Mommy sponges, with optional drip tray and optional raisers for the drip tray. The raisers must be glued to to the tray, but this is optional. Printed mine in 0.12mm…
The BATHROOM DADDY! Make your father proud to display his hair loss treatment, or denture glue! Or just make it for yourself, or a friend. The TEXT is customizable (in the .3mf file) in your slicer. Or delete the text layer and add your…
We have two different version of crawdaddies, crayfish or crawfish. One has side legs and the other does not. Included is both the .stl and painted .3mf
I made this holder for the sponge as others we had used were not ideal as they used adhesive in the basin. The tap diameter is Ø23mm, if you like this and need a different size let me know and I can adapt it for you. It is assembled by…
Stores 2 scrub daddys vertically with drainage channels
Keep your sponge smiling and your sink tidy with this custom 3D printed stand, designed specifically for Scrub Daddy (and Scrub Mommy, too!). Its sleek base allows for drainage and drying, while the playful silhouette adds a pop of…
Scrub daddy sponge holder - No support - Easy print - No glue - Two pieces - Easy assembly
UPDATE 2026 Stepfile include OEM part WE Nozzle G17/G18 Hopup unit WE G17 Manual Bolt Spring Wire 0.5mm OD 6mm Length 100mm
A sponge (scrub daddy) holder. It's got a flat (give or take) bottom for sitting on flat counter tops. It's ramped internally so that any moisture in the sponge will run off into the sink. Plenty of ventilation to help it dry. While I…
Yet another scrub Daddy/Mommy holder! There are many good models for this very popular scrub sponge but I wanted to add a little whimsy and a deeper drip tray. No AMS needed can be done by layer swaps. Start with black, change filament to…
As if there weren't already enough Scrub Daddy sponge models out there, my wife didn't like any of them. She wanted a simple design that would sit on the counter behind the sink - not in the sink, or over the sink. But one that wouldn't…
Final version, to be printed in PETG for greater strength and durability, especially when used outdoors. This bar can be used to attach 2x2 “Cif Scrub Daddy” sponges, and fits directly into the original holes provided for attaching the…
This is a rack for scrub daddy sponges, designed to be screwed into the bottom of a shelf. It uses 8mm rods. You can use standard linear rods, however I recommend using stainless steel rods or coating the linear rods as otherwise they…
Self draining scrub daddy holder. Printed with 15% infill and supports to baseplate.
🏹 The BOW DADDY: The Ultimate Vehicle Bow Hanger Keep your archery equipment safe, secure, and out of the way during transport! The BOW DADDY is a custom 3D-printed hanger designed to mount effortlessly to the back of a car seat,…
The original was too small for my brush. This piece slides into the original model and holds the official brush horizontally instead of re-printing the whole thing. It is not perfect and could be revised, but it works for me. Simply…
This is my version of ColeH's Peeing Scrub Daddy holder. complete fresh design with some boots. Printed feet down with tree supports at 0.16mm layer height. Update 1/10/26 See the new Scrub Mommy much better…
I came up with this calibration tool design after many failed attempts at getting my top surface looking right. The Flow Daddy measures input vs output of filament and gives you a flow ratio read out. Only takes about 2 minutes to preform…
My wife needed something to hold her Scrub daddy sponges. This is designed to fit over my sinks middle divider and hold the daddy/mommy sponge with the spikes for the eyes and another normal sponge on the other side. Designed so that the…
The print is designed to hold the popular Scrub Daddy sponge. The necktie base serves as a drip tray. No Color Changer required for this multi-color print. It is designed for no supports . No Glue Necessary Assembly Snap the hat ribbon…
A simple sign that reads “Dungeon Daddy” with some DnD symbolism. Project is split across 2 plates. Plate 1: Can be printed without AMS, just introduce a pause at layer 8 and change filament (this is how I did it). Would recommend using a…
Battery Daddy Replacement Back Panel AA holder for Battery Daddy organizer. You will need to remove the spacers/stabilizers from the original organizer. Most of mine broke off when I dropped the organize, but I did I have to remove one…
My wife asked me to make a holder for the scrub daddy sponge and this is the result. It sits on the side of the sink with an outlet for the water New version here with print in place jointed legs…
Just a Scrub Daddy sponge holder with some add-on for drainage into the sink. Print needs supports, so print in the orientation that works best for you. Info: version with bigger supports now also available.
Bear Daddy with Cargo shorts and work boots for your collection. Support is recommended. Base to be printed separately (40x2mm cylinder)
A family member asked me to print one of those scrub daddy stands that have legs, but none of the models I found fit on my build plate (100x140mm) so I decided to model one myself. I tried to challenge myself and do some curves based…
My wife asked me to make a holder for the scrub daddy sponge and this is the result. It sits on the side of the sink with an outlet for the water This is a new design with print in place jointed legs, in the original the legs clipped on…
Replacement clip for Battery Daddy Smart organizer. PLA+, 100% fill. Printed without support and it worked just fine, but you may wanna use it for on the clip.
This Scrub Daddy holder is an adorable addition to the family! It takes minimal filament and can be printed with smaller printers. Supports are recommended when printing.
This is my first 3D print that I am comfortable sharing. I wasn't happy with other models without drains and some drains didn't fit my needs. The drain is large enough as to not impede flow and it sits nicely on the side of a sink. I used…
A handle for the scrub daddy. Designed to be printed without any supports.
This is a decoration for a shelf, home, apartment or a motor home. if your name is Daddy
Print-in-place articulated Scrub Daddy sink holder designed for easy, support-free FDM printing. Prints in about 2.5 hours and uses roughly 45 grams of filament . Articulated legs hang over the sink edge, arms support the sponge, and a…
Designed this scrub-daddy holder to rest on the metal wire drainer of my kitchen sink. Can also be used to hold other scrubbers/sponges of a similar size. The design features: Rounded design to suit a normal scrub daddy, with a fair bit…
Just a Scrub Daddy sponge holder with some add-on for drainage into the sink. Print needs supports, so print in the orientation that works best for you. ______________________ As a special treat I colored the model as ScrubBob (or…
Scrub Daddy Holder — Minimalist A simple holder designed to keep your Scrub Daddy elevated, dry, and ready for use. Drains perfectly into your sink and not on the countertop- also making it easy to clean as opposed to some holders that…
Print without supports, brim and raft are optional. (P.S. It looks hilarious.)
Simple mount to hold Scrub Daddy in the sink. For me it was a little bit tight for my sink divider, but after a day or so it took the shape of the sink and fits very well now. I printed with the shorter side on the bed and supports…
Original file was not deep enough to fit the Scrub Mommy pads that include both the sponge and abrasive scrub pad. Model was stretched just enough that the entirety of the sponge fits without extending over the lip of the holder.…
Scrub daddy sink caddy! BOM: Suction Cups The suction cup holes measure 14mm (outermost diameter) to 10 mm (inter diameter). See the example suction cup measurement image included. NOTE: Before printing, check to see if your sponge will…
Ok, I accidentally got myself a scrubmommy/daddy sponge because it looked funny, but it turns out my version has a bit different "face" than other models and besides I needed something that I could use to attach to a flat vertical…
Recommend printing with 3+ wall layers to help keep the socket from reaming out.
I replaced the empty portion of the original mesh so that I could make changes. This should assist anyone else wishing to make modifications. I made it hold a 5x30 hex-head metric bolt because I had one nearby and couldn't find a…
I needed a container to hold my sponge with some air holes. It’s a snug fit so the sponge doesn’t fall out. The feet are separate so before slicing, separate model and arrange it all on your print bed, then you can glue the feet on the…
A quick model to allow the sponge to drip dry. Print the seat 2x, glue with superglue.
This is the Scrub Daddy Sink Ensemble. It is a collection of models that allows you to print and then assemble your own sink caddy. It's a modular design, so feel free to swap holders between the two mounts provided. Assembly is easy. The…
