1,011 models
This collapsing dagger is designed to be printed as one part. Its only 130mm high when printed and the blade extends to 260mm long! The Replaceable Blade Version is available to my Clubs members. Supports are not required, for best…
A Minimalist Skeletonized Dagger. The Finger whole is the average male ring size of 20mm diameter. Scale model as needed using your ring size in the chart below. Ring Size (US) Diameter (mm) Scale Factor 5 15.7 0.785 or 78.5% 6 16.5 0.825…
I increased the height (up to 5.5 cm inside) of the excellent 3D model of Plastic bag roller from Andrey Shayter so that boxing Hand Wraps could be placed in it (or any other wide tape) . Saves a lot of time. Thanks to Andrey Shayter for…
The source marked this model as adult content.
Someone requested a customizable collapsible sword - and here is my take on that topic. I decided to print a wand, but you can choose a more sword-like shape. Collapsed length, number and thickness of segments - your choice also affects…
A single finger knuckle duster that has a dagger blade attached. The Finger whole is the average male ring size of 20mm diameter. Scale model as needed using your ring size in the chart below. Ring Size (US) Diameter (mm) Scale Factor 5…
Handy box cutter or decorative mini daggers - only 4 grams of material
This collapsing sword is designed to be printed as one part. The replaceable blade version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to print…
I liked all the dice daggers that I've seen on etsy and elsewhere and I thought I'd bone up on my fusion skills and see what I could come up with. Ultimately I wanted the dagger/sword to look like something a nobleman would carry. For…
Usage These are designed to be used during rope bondage/shibari to add some extra sensation and fun. The spikes can be added during tying, or ahead of time so the positioning is somewhat random. They can also be used in limb joints or…
This is the Ebony Dagger from Skyrim. The measurements seem accurate, but it is a little small, so you might want to scale it up a bit. UPDATE- I have remade the 3d printing files to fix some issues and make them easier to print.
This is a remix of the lovely "Ebony Dagger (Skyrim)" model by Shadowcraft. Thanks, Shadowcraft! I have made the following changes to the original: Scaled up the dagger so that overall length is now about 40 cm. Trimmed the base of the…
A pair of small Daggers with different grip designs. If there are any knife designs or other tools or cosplay props you would like to see, please message me an image and i will design it.
REMIX Skeletonized Dagger two side
This is a dagger for Dummy 13. It is about 37x13mm and 3mm thick. I recommend using the “0.15mm Speed” profile in Prusaslicer, no changes needed. Also check out the rest of the arsenal I made, the files can be found on my profile :) If…
[UPDATE] 3/29/23 - Adjusted sheath to fit the blade properly.
Daggers and Short Swords Set Hey maker! 👋 A complete set of daggers and short swords for your collection or display. Features: Designed in halves for easier printing – print one half, mirror it, then glue together. Scale the dagger to fit…
Print two times this half with two connectors and than glue them together :-)
This is a portable container for adhesive bandages with a snapping lid. The inside dimensions are 17×32×90 mm. It’s compact and easy to carry, making it great for outdoor activities, hiking, camping, travel, or keeping in your car (don't…
Skull Dagger The dagger can also be hung. It has a hole in the handle.
Joker's weapon from Persona 5 and Smash Bros. The scale is kinda weird because it differs depending on the game (Smash or P5). DO NOT PRINT THE pegv2.stl™ AS IS UNLESS YOUR PRINTER HAS 0.00000... TOLERANCE!!! SCALE THEM DOWN! I might…
Made this in a span of 2 days for a friend, it still needs tweaking here and there but it's good enough for printing I think. The sheath might need some foam or something inside to work best. Set scale to around 800% in each part, the…
Plastic is not very strong, but when it is attached, there is no leverage to break it, so it is secure enough. For printing use 100% infill and 0.1mm layer height. Numbers in model names are clearances. Cover part is designed to be…
Modeled these up, they take 3/8 rods down the center(I used a threaded rod left over from my printer build). Be sure to post a make! Category: Props
Ok so this is a spiritual successor to the Fiddle linked here. The problem is the pieces/model files are incomplete. The user hasn't updated it in quite sometime and I had no success modifying the fusion 360 file. There are parameters…
Just a simple wall mount for blades of varying sizes.
A 3D Model of a skull necklace Dagger.
Luminous beings are we...not this crude matter … - Yoda --DAGOBAH-- Celebrate Star Wars Day of May 4th with the most iconic landmark/locale in the series: Yoda's hut on the swamp and jungle planet Dagobah. Print the crashed X-Wing to…
May the Fourth Be With You! Introducing a kit card version of the TIE/dg Starfighter (also known as the TIE Dagger, or the Sith TIE Figher. Individual parts are included so you can print the model without the sprue to save plastic if…
Trainingsdolch für Force on Force Training. /Training dagger for force on force training. Gedruckt mit 100% Infill / Print with 100% Infill Gcode für Trainingsdolch mit text . Modell ohne text ebenfalls angehängt / Gcode for…
The blades don't last long in the hands of a 6 year old, but with a little modification the blades are now removable! Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: .2 mm Filament: Doesn't Matter…
Love the remix that Comrade 3D did, but I needed to add a built-in tensioner to flatten out the wrap as it's being rolled. The existing model is great, but I found I needed a 3rd hand to keep things tidy - this remix is to help with that!…
Model directly from the game. Can be cut up to make it easier to print
I designed the dagger to be somewhat true to the in-game scale, but as I have large hands I printed it at 110% to make the grip a bit more comfortable. Shows up better in pictures, too. I've broken the model up into a couple of…
Two models included. Full build and 2 parts with an 8mm dowel. you can print one or use a wooden dowel. I recommend printing separately without supports.
Gegagedigedagedago Chicken Nugget I was given instruction on the ride home from school that I needed to design a chicken nugget with a face. I was shown a video. I scratched my head. But he was very entertained. Here is the Nugget.
This is a remix of the collapsing dagger with the change of adding my initials to the handle. I attached the OpenSCAD script that references the original file dagger.stl. This file needs to be in the same folder as the script.
Este modelo no fue dificil de unir porque el modelo en separado ya eccistia
My kids recently watched the original Peter Pan animated movie and really wanted a dagger just like Peter Pan's. I searched the web and didn't find anything that looked like the cartoon classic. Here is my design of the original from the…
PLEASE FOLLOW AND LIKE (Original model I designed) “Prehistoric power meets modern edge. This karambit-style knife is designed to look like it’s carved from ancient dinosaur bone. Lightweight, fierce, and perfect for display—this is a…
This is a remix of Sting sword | Lord of the Rings by RoyalTriple at https://www.thingiverse.com/thing:4682285 Which is itself a remix of Ricardo Alves original model from…
The Claddagh ring meaning is all about love, loyalty, and friendship
The collapsing print-in-place dagger is amazing, but what if you have a multimaterial printer and want the blade in a different color than the hilt? This remix is identical to the original dagger, except that the blade and hilt have been…
Mini 13: Figurine System Compatible Melee Weapon Set, includes 5 weapon designs: Dagger Combat Knife Combat Knife W/ Guard Kurkuri Tanto
_You will need OrcaSlicer for this file to load correctly_. I tried with Bambu Studio and it does not (currently) open seamlessly. I don't know if PrusaSlicer will do better. I have tried to label the build plates in a way that makes them…
This is an articulated version of Rayla's Moondaggers. the blade is a little smaller then in the series so it would fit inside the handle when folded. There is also no hook/blade. It was impossible to integrate in the design (unless…
From Wikipedia: "In American folklore, the hodag is a fearsome critter resembling a large bull-horned carnivore with a row of thick curved spines down its back. The hodag was said to be born from the ashes of cremated oxen, as the…
Die einzelteile können einfach zusammengesteckt und Verklebt werden. Ich habe die Teile mit 2 Komponenten kleber zusammengeklebt, die Teile habe ich davor auf den Klebeflächen etwas mit Schleifpapier angeraut. Um das verrutschen der…
Abyss Watcher Dagger - Dark Souls 3 I'd seen the model for the greatsword that goes with this ready to print, but never the dagger. So I decided to throw this up for anyone who wants to use it. I had to use the model of the Abyss Watcher…
A Skyforge Steel Dagger from The Elder Scrolls: Skyrim Made as a practice model in Onshape while teaching a friend CAD modelling. The Onshape document can be found at this Link The model can be printed and further finished for use in…
It is a holder for a KATANA, my friend has two. The middle one is 105mm from the base to the circle. The other two is minuss 40mm therefore 65mm, the other is 125mm. I used PETG but most polymers are fine. Infill: 5% 5 is plenty, the…
Esposas de tobillos para la practica de Bondage. Ideales para restringir el movimiento. Se pueden acompañar con cuerdas o cadenas. Las fotos que podéis ver esta impresa en boquilla 0.4 y altura de capa 0.2.
The DaggerHeart TTRPG uses relative ranges (melee, very close, close, etc) as a part of the game mechanics. This tool allows tabletop players to better envision the distances. This design was inspired by a reddit post from u/FaileasDhan…
Print it hot, dense, and slow. As is, with no supports. Use fine grit sandpaper to get the tip perfect. Modeled for large hands, so scale it accordingly. Don't poke your eye out.
Inspired by the Benchmade™ SOCP line of daggers, this pointy-ish defensive tool is not easily knocked out of your hand as you counterattack, gouging the thug's neck and eyeballs and whatnot. See Also Jérémy’s Weaponry Collection
It is knife from famous game Counter-Strike2. Set the size of model to 165%
sheath made in tinkercad for the Skyrim steel dagger
I hope you like this accessory for your dummy 13
Level up your cosplay arsenal with my fan-made 3D model of Zoey’s “Shin‑Kal” daggers—an electrifying tribute to the K‑pop demon hunters movie on Netflix, and just in time for Halloween. This version balances a bold, screen-inspired…
Usage These are designed to be used during rope bondage/shibari to add some extra sensation and fun. The hooked shape lets you easily get them under tight wraps and into position painlessly (well, not totally painlessly 😅). For safety…
HUNTRIX Zoey's Throwing Blade
I liked the remix with the 1/4in cavity, it works great for a threaded rod. i didn't like having to glue it all together so I put the parts in tinkercad. i made a sheath for it…
A magnetic fear tracker for Daggerheart in the style of birds perching on a rooftop. Prints with minimal supports, only the bird magnet holes require them. Ravens often represent tricksters in mythology, which makes them seem appropriate…
After i bought popular aliexpress bike light i needed second mount for my other bike. Its simple, yet fit its purpose. Lamp just slide in and locks with original latch. Print horizontal in PETG or even better in ABS/ASA.
Embout à insérer au bout du rail de guidage Festool FS pour éviter l'accrochage du fil ou du tuyau d'aspiration. Pour cette fonction, il peut remplacer le déflecteur FS-AW. Mais cet embout ne guide pas les tuyaux, il évite juste qu'il…
Another Lost in Drafts Resurrection. Print at your own risk. I have no idea why this was left in drafts. soo…. Mort from Madagascar
Version 3 of my bottle cordage maker. I made a version 2 then realised that both versions 1 and 2 sucked so made a version 3. More info in video: https://youtu.be/ZrLhaQKYRrs The purpose of the tool is to shred plastic bottles into…
This is a roman pugio with an 8-inch blade. This has a gladius style grip and is a 3 part assembly. It requires glue to hold. there will be intentional lines on the model that indicate what separates wood from metal. The painted pictures…
This is a digital 3D printable model of the Knight Killer Dagger from Solo Leveling . Color-separated design, so no multi-color printer or painting is needed. You might also like the Kasaka’s Venom Fang 3D model or Barukas Dagger :) 📦…
Name: Yor Forger née Briar Codename: Thorn Princess Location: Ostania Mission: REDACTED The set of gear for the lethal Thorn Princess. Enemies not included. Stilettov2 x 2 (plus however many you want to toss at enemies) Hiltv2 x 2 (plus…
I wanted a letter opener. I got a little carried away. I stumbled on @Archie's Loki's Dagger Separated model while looking for said letter opener, and got an idea. I wanted a model that could assemble similarly to how an actual dagger…
Hello, Welcome to my profile, full of models and miniatures :-) I have a Collapsible, retractable dagger for you. It works nicely, you can even hit it and it won't break! It's nicely made and the blade comes out really easily. It prints…
honestly just have fun with this one everybody! i want to see what you can create! if you print this just tag me in my tiktok @yggdrasil3dforge so i can see what becomes of the design!
To scale glass dagger from the epic series Mistborn by Brandon Sanderson.
Yor's dagger from Spy x Family. Easily printable with a brim and tree supports. I'd recommend a PEI plate, preferable textured. Easily assembled with superglue and sanded for cosplay. I made these for my wife using reference images from…
🇲🇲 မနမမကဆပသည။ Welcome to Myanmar! This model was created by Dany Sánchez . Located on a hill in Yangon , the Shwedagon Pagoda is the most sacred Buddhist pagoda in Myanmar, as it is believed to contain relics of the four previous Buddhas…
Usage These are designed to be used during rope bondage/shibari to add some extra sensation and fun. The wedge shape lets you easily get them under tight wraps and deep enough to keep them from moving or flipping out sideways. The…
A simple clip to secure elastic bandages used to heal sprains. Printed in PLA with 100% infill and adaptive layer height.
Simple ornamental dagger, drawn from scratch in OnShape. Printed on a Prusa Mini (the dagger is 180mm long, rotated 45 degrees, it fits nicely on the bed. Onshape:…
HANDLE HAS A FITMENT ISSUE, IT WILL FIT IF YOU SAND OR FIDDLE WITH IT It's almost a 1:1 recreation of the LAS-7 Dagger from the game Helldivers 2. The only detail it's missing is the grip, where I could only manage to make it smooth,…
Based on the Joussot's shape. It is recommended to print it in PETG wich is less breakable compared to PLA, adjust the size around 24cm or that fit your needs. Use a minimal infill of 20% with Gyroid, but its better to infill it to 70%…
Dagger that apparently is called a Charax. I modeled 1/2 of it so print two of them and super glue them together and it should work well. Category: Props
Just a quick copy of a Skull Dagger Necklace i found on pinterest.
Had some leftover PLA and a few hours to design this and thought someone might want it too. Printed on Ender3V2 so recommend similar workspace. Included half blade with sharper edge and whole blade which is more like a training blade.…
Recommend printing on it's side with text upright.
This is my dagger stand. i had to make it 3 pieces to be large enough. Its pretty sturdy and doesn't look bad (I think)
Remixed @BlackHeartCon_260800's model to separate the blade from the hilt (I used this to make a glow-in-the-dark blade) for a Hobbit costume. A very easy print with no supports. Parts to Print: Blade x2 Hilt x2 Tang x1 Support x6 After…
I used some sandpaper to smooth out the pins for the fit, it depends on what printer you have.
Hi 3D printing friends! This design is a replica Band Aid I made just for fun. I had a crack on something that I didn't intend to repair and I thought this would be a funny way to cover it a bit but also draw attention :) You can heat up…
