14 models
Deftones White Pony logo decoration Part of my new series of band logo home decorations that can stand on their own, perfect for displaying on a desk or a shelf! Dimensions: 177mm w x 192 mm h x 16mm d (can be scaled up or down) Filament:…
I wanted this for my office and whipped it up. If you use a light strip with a thin enough battery box (like a button battery) you can glue some lights to the back of it like I did. The lights may show through the front depending on your…
Stand for Elecom Deft Pro trackball. Three options available: 10 degree tilt 15 degree tilt 20 degree tilt Category: Computer
So here is my attempt at the deathwatch blaster based on the Deftech 1315 gas gun as requested by a follower. It will take a 290mm pvc pipe with 22mm OD to add rigidity. The grips come in combined and seperate . The trigger is static…
This is an enclosure for the MidiThru4 by DeftAudio 1x4 MIDI Thru PCB. The bottom contains two bosses that help the PCB snap in place. It also contains debosses legends for which MIDI jack is IN and which are OUT. Labeled holes for POWER…
This case contains and protects a Deftaudio 8+8 MIDI breakout board . The halves snap together with no fasteners. There is a version without the lettering on top, if you prefer it plain. No photos, because i didn't print that version,…
The Pad is for Deft pro, the trackball mouse.
print recommendations: layer height: 0.2mm for the first layer, 0.1 for others; concentric top surface pattern; seam position - back; 7% infill is enough
The MidiThru/4 splitter from Deftaudio ( available at https://www.tindie.com/products/deftaudio/midi-thru-1in-4out-splitter-pcb-or-a-kit/ ) is a really nice little kit, and about the cheapest real splitter box you'll find. However, it…
A power switch replacement for Elecom Deft Pro trackball mouse with additional angle conversion part if you replace the DIP switch with the top actuated version. Elecom Deft Pro use a side-actuated MSK-23D18 DIP switch from Vimex to…
Replacement battery cover for an Elecom Deft Pro trackball mouse https://www.amazon.com/Trackball-M-DPT1MRXBK-Bluetooth-High-Performance-Responsiveness/dp/B07C9T4TTW?th=1 Print Settings Supports: Yes Category: Replacement Parts
Replacement battery cover for an Elecom Deft Pro trackball mouse https://www.amazon.com/Trackball-M-DPT1MRXBK-Bluetooth-High-Performance-Responsiveness/dp/B07C9T4TTW?th=1 Print Settings Supports: Yes Category: Replacement Parts
If you have multicolour print I recommend to give a different colour to the last couple layers so that the letters are a different colour and are more visible. I made it in full white pla and then painted the top black as I don't have…
