353 models
Fleur Delacour's wand by printer42 organic support original model https://www.printables.com/fr/model/166124-harry-potter thanks to mikolas zuza for those test gcodes awaiting prusaslicer 2.6 entry just to find organic support gcodes…
Print approx. €3.17–€3.87 excl. taxPreliminary estimate for one variant
I initially designed this to be a wall hanging and my wife decided to use it as a tray on the side table by the pool to keep phones and keys in one place when guest come over. it does work for both.
Print approx. €15.13–€18.49 excl. taxPreliminary estimate for one variant
Wall Mount Bat Candelabra. Use the add part to add your own wall mount hole in prusa slicer. You can also print it at an angle and make it bigger. I think it needs to be bigger for a led candle to sit nicely on the candelabra part
Print approx. €5.02–€6.14 excl. taxPreliminary estimate for one variant
When assembled with the cups or hand pump attachment, Medela's breastpump bottles tip over and fall super easily. This is a snap-on collar to the foot that helps prevent that. Prints cleanly without any support. The cutout is designed to…
Print approx. €2.32–€2.83 excl. taxPreliminary estimate for one variant
Original helped my feeding issues but caused fps to drop on full auto. Removing the pickup side fixed that for me. May require a bit of trimming to fit.
Print approx. €0.07–€0.08 excl. taxPreliminary estimate for one variant
The provided link for the DELACK enclosure has everything you need to build the enclosure. However, in my remix, I decided to route some cables along the bottom instead of the top. Unfortunately, the enclosure models did not have feet…
Print approx. €1.22–€1.49 excl. taxPreliminary estimate for PETGSource material: PET
This door handle is an upgrade to the base handle for the delack enclosure. I wanted something larger that I could easily grab when opening/closing. This fits the same bold hole and fits the M5 nuts that come with the enclosure. I suggest…
Print approx. €1.41–€1.73 excl. taxPreliminary estimate for one variant
This is the middle bracket on a DELACK enclosure with a cable holder for the Buddy3d camera cable.
Print approx. €0.42–€0.51 excl. taxPreliminary estimate for PETGSource material: PET
Bodywork supplement washer shim for Carson CV-10. Printed in PLA at 0.2 Arandela suplemento carrocería VW Golf Rc Carson CV-10. Imprimido en PLA a 0.2.
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
CLICK HERE FOR THE ASSEMBLY GUIDE Available for $119.99 CLICK HERE TO BUY DELACK AT 3D SOURCERER.COM CLICK HERE TO BUY DELACK ON OUR AMAZON STOREFRONT AVAILABLE IN THE USA ONLY! MMU3 COMPATIBLE
CLICK HERE FOR THE ASSEMBLY GUIDE May 28, 2024 Update Added a self-threading bolt hole for the LED MIDDLE SUPPORT to allow for a bolt attaching the LED MIDDLE SUPPORT piece to the top piece of plexiglass to keep the LED attached to the…
Add extra space to your DELACK with this skirt print! Contains an option for an external LCD mount! PLEASE REMOVE ALL OF THE ZIP TIES FOR THE LCD CABLE UNDER THE PRINTER, OR THE CABLES WILL NOT BE LONG ENOUGH TO REACH THE LCD! If you are…
Mountable enclosure for HCW-M421 Delay Timer Module. Requires: 4x M3 heatset inserts 4x M3x15mm brass standoffs 4x M3x6 screws of your choice for the lid Update 1: Added option of Lid with Integrated Standoffs in Lieu of Brass Standoffs…
CLICK HERE FOR THE ASSEMBLY GUIDE
Impresora Kingroon KP3S Boquilla 0.4mm, capas 0.2mm y relleno 100%. Filamento BASICO de Control 3D en varios colores (Español). Espesores de las capas amarillo 2mm, negro 1mm y blanco 0.8mm Kingroon KP3S Printed with 0.4 nozzle, layers…
Mount your 120mm fan on the back of your enclosure with a HEPA filter CLICK HERE FOR THE ASSEMBLY GUIDE
This macro automates the heating delay time for large print beds, making it ideal for 3D printers with significant bed sizes. It intelligently adjusts the delay based on the actual bed temperature and the target temperature, ensuring…
CLICK HERE FOR THE ASSEMBLY GUIDE
High candelabra model, it looks elegant in strands such as vertigo or glitter. It can be scaled in Z even values of 0.5 to achieve greater stability, although it loses its elegance. But I have also put the low model
In need of a sector gear delayer chip for a new high-speed build using SHS gears I needed a sector gear delay chip which no shop in the area had in stock, so naturally I designed and printed one myself. Print this in a sturdy material for…
CLICK HERE FOR ASSEMBLY INSTRUCTIONS
CLICK HERE FOR THE ASSEMBLY GUIDE
CLICK HERE FOR THE ASSEMBLY GUIDE 2/28/24 UPDATE Increased depth of top hex cutout per popular demand
Candelabro simple para velas estándar de 2,2 de diámetro. Altura de 20cm y 16 cm. Simple candle holder for standard 2.2 diameter candles. Height of 20cm and 16cm.
Fleur Delacour is a character from the "Harry Potter" series by J.K. Rowling introduced on The Goblet of Fire, she's one of the Triwizard's Tournament participants. Print "Fleur1.stl" at 0'1 or 0'15 layer height. You can print…
CLICK HERE FOR THE ASSEMBLY INSTRUCTIONS
SHS delayer chip 3 walls, 100% infill, printed in 3Dlac pla+
Delaware, USA (DE) Topographic Relief Map with Rivers and Coastal Waters Delaware, USA mountains, coastlines, streams, and lakes in a dual or single color topographic and hydrographic map! All topographic states in the USA of Plastic…
Morro del McLaren de F1 MCL60 del año 2023
CLICK HERE FOR THE ASSEMBLY GUIDE
Feeding a newborn can be quite taxing and the last thing you want is spilling precious breast milk. I created this bottle holder for my wife so she has an easy to reach and safe place to set down the milk bottles when she was done. I…
Needed a holder for my Zero Delay board for my Retropie arcade cabin. It came out nice and I thought I would share it with you!
Candle Cover Sleeves, Chandelier Candelabra Socket Covers 101mm almost 4” Tall Candle 21mm Inner Diamerter
CLICK HERE FOR ASSEMBLY INSTRUCTIONS
CLICK HERE FOR THE ASSEMBLY GUIDE
Perno............4cm*3mm arandela........0.5; 1.0; 1.5; 2.0; 2.5; 3.0
Come join this collaborative project to create the Tabernacle of Moses (Mishkan) as described in Exodus, with its courtyard and objects! Here is the link for the group I just created, and I am hoping others will want to join in to make…
this is a model i fully made myself it works with a cable connection from UppfinnarAXEL what do you need : glue, tape, small screw How to assemble: step 1 print all parts. step 2 glue the frame thogeter and put tape over it so it stays…
The gaps between the door and front panel of the Delack enclosure are fairly big, and if your enclosure sits with a window near its front face you may get drafts of cool air onto your model. This seal aims to avoid those. The geometry…
CLICK HERE FOR THE ASSEMBLY GUIDE
I remixed Drizzt's (thingiverse 4079137) model because it was too tight and the lid was not closing properly, resulting in milk leaking. Also made the handles longer and closer to the bottle for a more comfortable fit. On some bottles it…
Davide captured the Angel Candelabra in the Basilica of St Chrysogonus with his Revopoint RANGE 2.
After printing the original, I realized that E27 is a European standard and I would not be able to easily get hardware for it in North America. This base uses hardware that I was able to find at my local Home Depot store.…
WARNING: Please only use electric tealights. I will not be held responsible if you burn anything down. This is a model I designed as a Halloween decoration and to work on my CAD skills. It is printed in two halves and glued together with…
CLICK HERE FOR THE ASSEMBLY GUIDE
Modified the part that holds the light in adip's design to have a piece that can hold a candelabra light bulb socket that is on a switched cord. These typed of cord can be easily found at your local Home Depot, Lowe's or other home…
CLICK HERE FOR ASSEMBLY GUIDE
We have created 2 versions of the DELACK MMU3 Mount - this is the Standard Version which is essentially identical to the positioning of the buffer and PTFE tubing recommended by Prusa during the assembly of the MMU3. PLEASE PRINT THE…
Orginally a wooden shop class project. I recreated it so that it could be printed and finished with a faux wood effect. Print in two halves to simulate a wood grain or print upright for a modern finish.
the candle holder is suited for three tealights ( ⌀ 39mm). I suggest you print this in PETG or a higher temperature filament (I printed it in PETG). I sliced it in CURA (4.9.0) and used the ironing tool and the Fuzzy-skin tool. The print…
This modern candle holder with sleek lines and clever modular design make it a standout piece in any room. Easy to print, even with a smaller 3D printer, and simple to assemble. With space for four standard 22mm candles, it's perfect for…
The skeleton part prints in 2 flat halves that you criss cross and slide together. Adding a concentric pattern with a dual filament will give a cool effect like the red/black version in the photos. The tealight holders are design to fit…
Candelabros de mesa para velas de 65mm de diametro con base modelada para colocar un recorte de goma eva antideslizante. 3 tamaños distintos para generar un conjunto, 14cm, 17cm y 20cm. Table chandelier for 65mm diameter candles with a…
Suggested material: PETG
Maqueta para imprimir del alerón del Ferrari SF15-T de 2015
CLICK HERE FOR ASSEMBLY INSTRUCTIONS
Zero Delay USB Arcade Encoder pcb spacer to mount encoder pcb inside cabinet, the part is designed to take M2 standoffs, whit nuts for 4mm spanner Print Settings Printer Brand: Prusa Printer: i3 MK3 Resolution: 0.2 Infill: 20% Notes: You…
--Having trouble uploading video so I posted it to Flickr: https://www.flickr.com/photos/steamboat_ed/49713025887/in/dateposted-public/ --Unlike a traditional deLaval turbine this one has a steerable inlet and aerofoil shaped blades. When…
Remix for a different lamp: https://www.thingiverse.com/thing:19104 This uses the same Home Depot light socket as the original:…
CLICK HERE FOR THE ASSEMBLY GUIDE
Trefoil knot extended into a candelabra. This model is based on my earlier trefoil model ( https://www.prusaprinters.org/prints/144385-trefoil-knot ). Normal 20mm diameter candles should fit. Best printed upside-down and with support.…
Arandela de ajuste de presión para resortes de la cama de impresión Se recomienda ajustar la altura de la Arandela (rondana) dependiendo de el grosor necesario las medidas del diametro interno son 3mm, 4.2mm, 5.2mm linktree:…
This model has been designed to fit Medela baby bottles as pictured. It provides a pair of handles that a young baby can hold onto while their hands are still too small to hold the bottle. It might also work with other makes of baby…
Pieza similar a la original del trx4. Puede ser utilizado sobre el eje delantero o trasero.
Iconic Movie Villains - A Clockwork Orange - Alex DeLarge - 1971
Tapón embellecedor tornillo eje rueda delantera F9.
Die Greifer beim Melkroboter gehen ab und zu kaputt und sind sehr teuer in der Anschaffung. Deshalb ist hier mein Nachbau der Greifer zum selber drucken. Ich habe es nun mit PETG gedruckt mit 100% Füllung. Verstärktes PETG mit Carbonfaser…
CLICK HERE FOR THE ASSEMBLY GUIDE
Arandelas por medida-Custom washers 3mm, 4mm, 5mm, 6mm, 7mm, thickness 1,5mm. Talvez haya que modificar el parámetro de pata de elefante a 0,2mm. Perhaps the elephant foot parameter needs to be modified to 0.2mm.
Diese Figur ist ca im Massstab 1:35 und ideal für Resin Druck
Medela Breastmilk bag storage. This is a heavier duty storage solution. Step and Fussion360 files included Inside Dimensions W 117mm D 172 mm H 202 mm. This is inspired by…
CLICK HERE FOR ASSEMBLY INSTRUCTIONS
Sfera aperta per mettere all'interno una candela
LEGO Delahaye 175 S 1949
I need socket nuts or retaining rings, whichever you would call them for some e12 candelabra sockets. Modeled these and they fit perfect. Made a bigger one if trying to install into a bigger hole or shade.
Add a 120mm fan, HEPA filter, and a 4" duct to the back of your DELACK or SUMO Enclosure CLICK HERE FOR THE ASSEMBLY GUIDE
Shield to attach to a Medela breast pump. The company-manufactured shields do not cater to all shapes and sizes, so a custom print was required. Print Settings Printer Brand: LulzBot Printer: TAZ 5 Rafts: No Supports: No Notes: Print with…
Also included is a “pre-painted” project for the main base and tail to be used with the MMU. If you want to use the MMU, open “pikachu_main_body-painted and sliced” as a project. This has all my info used. Filament used for the MMU print…
Soporte para los parasoles delanteros izquierdo y derecho que cuelgan del techo. Esta pieza es muy mala en los vehículos NISSAN que la llevan y se suele partir el minúsculo clip que tienen dentro para sujetar el palillo que mantiene el…
I really liked the lithophane moon but had to scale it down to 80% to fit my printer bed. I also used a different candelabra base so I modified the original design. You can print this model at 100% and then print the original moon at 80%…
Medela hospital-grade breast pump Symphony has different diameters compared against Medela commercial grade pumps. This adaptor allows you use commercial pump parts with Symphony pump Tested with Swing Maxi parts
The source marked this model as adult content.
This stand doubles as a barrier to prevent unintentional pausing of this Medela Freestyle pump ; i.e. it can be worn with the pump as you go about your chores at home while pumping and baby sleeps! It can be pulled down or pushed on with…
A nice Flowerpot podest Whatever you think of it ,as it is.
Add a Blink Mini camera to your Delack enclosure. Print out and use two M3x8mm bolts to hold the camera to the corner piece. 8mm bolts were just long enough. If you use 10mm, don't over tighten then because you don't want to end of the…
It is a 2mm thick, face-up sign with a filament change marked around 1.4 mm. I added two holes in the slicer for hanging but it is thin enough to use double sided tape to hang it if you don't want to add holes. I used Bambu Copper Metal…
With all the breast pumping stuff we have for our new baby all the bottles were getting a little out of hand in both the fridge and cupboard. I designed these racks to help keep the bottles together and from falling over. Designed to fit…
The “DELACK Enclosure Modular Top Corner” kit comes with a few containers, but I wanted a larger one to hold all the Prusa Mk4 tools in one place. This is the result. I've tried to optimize it by moving the tools in order of use, e.g.,…
CLICK HERE FOR THE ASSEMBLY GUIDE ***THIS PROJECT IS IN BETA - PRINT AT YOUR OWN RISK*** To be completely transparent, we DID encounter some issues with the MMU3 when using this setup. However, it was difficult to determine if this was…
This is a variation/remix of the litho lamp: http://www.thingiverse.com/thing:97884 The major difference is that I wanted one that used a wall powered incandescent lightbulb with a inline switch like those found in a classic night light…
I wanted to make some of the lithophane lamps here: https://www.printables.com/model/225160-lithophane-lamp using the lamp holders I purchase from here: https://www.amazon.com/dp/B07Z2PNNTG but they only come with half the number of nuts…
CLICK HERE FOR THE ASSEMBLY GUIDE DO NOT PRINT WITH ANY SUPPORTS - THEY ARE BUILT INTO THE MODEL AND CAN BE EASILY REMOVED AFTER PRINTING!
Wanted a box to house the ‘timer delay off’ circuit board for mounting it in my garage. This design allows the the box to be fitted in place and then the circuit board can be fitted inside after wires are connected. I wanted a LED light…
The Delack enclosure has a skirt available for boosting the height. When used with a paver or MMU3 it works fine, but with both it was a little too close for my liking. The regular skirt also does not have mounting holes for the top…
I have only implemented the “ribbed” rear-right-hand side. If people would like, I will do the other variants ("plain"-{left,right}, ribbed-left) as well. The only changes to the assembly instructions for the MMU3 Cassette Buffer were to…
candela sleeve to replace a broken one on a chandelier, printed with a 0.2 nozzle at 0.1
I wanted a bottom-mounted Wyze camera so the extruder would be out of the way when trying to view my prints. I leveraged the designs from the DELACK enclosure feet files and merged them with the Wyze Cam mount. Mimicking the MK4 hex…
