Counting matching models…
While upgrading my 🥰 VORON to support a filament cutting toolhead, I was missing a depressor that matched what I wanted: Mounts on top of extrusion backers Provides a precisely fitted cutting position behind the print bed Keeps adjustment…
A simple mod for the Slimline PlayStation 2 that protects your discs from getting scratched by the lasers ribbon cable. Support for both laser types! The mod should work on any PS2 Slim model in theory but confirmed to work on 70004 &…
Depressor Mount Enderwire Switchwire for ERCF Filametrix https://github.com/sorted01/Filametrix settings filametrix ( _MMU_CUT_TIP.cfg ) variable_pin_loc_x: 23 variable_pin_loc_y: 180 variable_pin_park_x_dist: 6.0…
redesigned sturdy version of depressor mount
If you appreciate my work, consider supporting me by buying me a cup of hot chocolate! :) https://buymeacoffee.com/aleksandrs I am proud to present my most intricate model yet: the Tongue Depressor prop for clinical simulation. This model…
Here Are you seeing , an Gantry Servo Depressor for the Filametrix or the FilamAtrix. This Servo Depressor works with the normal Filametrix or FilamAtrix (CW2 and G2E) Material are needed: 1 x M3 Heatnut 1 x M3 4x3x5 Heatinsert (short…
Wall-mounted tongue depressor dispenser. Mounts to the wall with command-strips. There is tolerance on the inside to glue a thin piece of clear plastic so that the supply of depressors can be viewed without leaving them exposed. Dispenser…
Many thanks to @Prze87mo_296900 for his version of the depressor mount. I adjusted the model to fit the “more robust belt path”-mod for the original Switchwire. I also added a breakaway support structure so you don't have to use print…
This depressor arm for The filametrix filament cutter mounts to the stock Ender 3 x-axis end-stop cover. Allows the uses of the Filametrix on an Ender 3. X-Endstop must be repositioned to be a positive stop. (right side) Required Items:…
This model now includes BOTH mg90s servo and the higher operating temp FT90M servo compatibility! The MG90S mount, arms and entire .step have also been updated. The FeeTech FT90M is the same servo that is used with the Nevermore…
This is a remix of the beefy_depressor_mount.stl from the FilamATrix project. The SV08 doesn't have the linear rails on top like a traditional voron 2.4 would but instead have the rails underneath and threaded through the aluminum…
Requires x3 M3x40 screws, x1 M3x6, x1 M3 heat set insert. The best blades I have found, they have lasted thousands of cuts so far:…
replacement front cover for trident R2 front idlers to double as depressor for the cutter...im using a4t + crossbow + xol cnc carraige for reference..if you use anything else it might not fit , CAD is available to make changes as needed.
cutting guide Tongue Depressor 18.5mm wide ,cut straight or at 45 degrees with a small saw, with finger grips on side.
A remixed depressor for E34M1. Use a long screw (length depends on the distance you will need).
This model allows you to mount the cutter depressor on a very good servo model (Axon Micro+). The CAD is a complete redesign of this file to fit nicely around the Axon servo, as it is a bit different than standard MG90/SG90. Officlal…
If, like me, you use an Orbiter extruder with your Stealthburner, this is a must! Great initial design by Pete, and I'm sure it would have worked if I were using the long lever, but I need something that would work with my setup.
When in a nerf war one way to rapid fire is to hold down the trigger and repeatedly prime the blaster. On some blasters this action can change the way the game is played as your powerful springer blaster suddenly can fire as fast as your…
This is a small part that allows you to easily press down the securing part on the pcb holder.
Filametrix depressor and poop chute for modified neptune 3 pro. I used a MGN9H, 320mm rail for extra length. Need 2 X M3 heat insert and 2 X M3x6 if you use the poop chute. 1 X MG996R servo and hardware. Need 1 D2F-01L switch to replace…
You will need 2x 40mm M3 socket head screws for sturdy mounting (button head might also work) A 20mm M3 socket head screw is also needed to mount the arm. The arm can be found here , the original design
These are designed primarily for multi-material printing on printers where the nozzle can't move beyond the bed area, like my VzBot 235. The servo mounts to a 2020 extrusion using a scalable shim to get it to the perfect height. Typically…
Contains a 4.5 mm version for bowden tubes or a ¼" inch version for gas tubes
This is a small, simple "bucket" that will attach to a wooden tongue depressor. It will slide onto a standard wooden tongue depressor giving it a little “cup” or “bucket” on the end. We used these to create simple toy catapults with…
To print, make sure you have 3+ walls, 15%+ infill.
If you're like me you constantly lose these and have to sacrifice an allen wrench every time to make a new one, so I made a dinky little mount to hopefully prevent that from happening in the future. Simple as they come. If you need help…
This tool was designed for these long handle tea infusers. The slots should fit other similarly styled models. It holds the infuser open for easier filling. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No…
longer than original, work with 5 magnet 6x3mm
This model uses the threaded hole close to the belt tensioner. No supports required. A good combination with my WWBMG 4in1 hub design.
This adapter converts a 3/8" impact driver into a mixing tool by accepting standard craft sticks or tongue depressors. The slot measures 24mm wide × 2mm high × 25mm deep and features internal retention bumps that grip sticks of varying…
Slightly modified from the stock Stealth Changer design to accommodate X end stop location per my mounts endstop location. The depressing face was extended ~2-3mm with other small geometry changes.
A depressor for the SV06 plus so filamAtrix becomes usable, my stepper current needed to be at 1.5A for the X axis and the printer should be adjusted to home on the right side instead of the left. the heatsets are roughly 21mm apart, i…
I wanted to override the built in timer to use a smart home plug to control the lights. This depresses the button continuously allowing for override.
The original depressor for Filamatrix are base on Voron 2020 frames. This one is for the 3030 HEVO frame. 3 heat inserts must be used in the model. 2 in the base for the 2 3x6mm SHCS and 1 for holding the 3x20 mm BHCS screw The base is…
Designed for an SV06 Plus to use with the Filamatrix filament cutting system Note: you will need 35 mm screws to replace the two upper X-axis motor screws I printed the motor plate bracket flat, but stood the cutting arm depressor on the…
Took ideas from other depressors but couldn't find a mount setup I liked. Ended up designing this and have been very happy with it. Explicitly designed for mounting on top of the FMG either 6mm or 9mm. I use ASA and a 10-20% infill with 2…
A remixed depressor for E34M1. Use a long screw (length depends on the distance you will need).
This model uses a 180 degree mg90s servo and will work with or without gantry backers on a Voron 2.4 or Trident. If setup correctly, there will be virtually no strain on the servo. You will need the following: m3x6 x1 m3x8 x1 m2x8…
