Counting matching models…
Remix adds detents for the 10 round Pmag. Belt clip was shortened to work with a 1.5" belt. Print in the default orientation, use organic or tree supports. Highly recommend 3 to 5 walls depending on your nozzle size.
I found it impossible to set up good Airbus style CLB + FLX/MCT + TOGA detents with the stock STECS detent pieces so I designed this custom piece that adds three identical and equally spaced detents. Print with 0.2mm layer height and 100%…
This mod mimics the A320 detents. I included the .step files in case you want to rearrange the detents or improve it. If the parts aren't fitting in the base part, sand it down, lower the flow rate or scale the base part by 0.5% in its…
I designed and build a desktop cockpit for the Aerosoft Airbus in FSX and had the Hotas X as my stick and throttle. It has a detent in the middle but it is nowhere near where the throttle needs to be for the Climb or Flex setting that are…
I could not find any good fingerlifts for the V1 version of the vpc throttle so I decided to design my own. It includes a gated idle cut-off which requires the fingerlifts to be lifted to get it from idle to cut-off and a afterburner…
Flap detents for Condor 3 soaring simulator for the VKB stecs throttle
Two simple parts to print. Print the one with bosses orientated as shown in the photo. You will need a 8-32 x 2" SHCS, an 8-32 thin, self-locking nut, a pair of 5mm diameter balls preferably steel or stainless steel, a pair of .187" OD x…
While building my simpit I found I wanted to be able to easily integrate the TWCS throttle I had on hand. I used the original model as a base and removed as much as I could. What was left is a simple box that can easily be fit into a…
This is model made by me, but inspired with some mod, that I saw on reddit photos, but never found a 3D model for. It uses an existing mounting points in Thrustmaster TWCS. I've switch places for two screws from base plate to fit the…
Flaps detent system for Virpil CDT VMAX (haven't tested with Prime). You will need need: 1 Hex Socket Spring Ball Plunger M5x12mm (Or M5x10) 2 Screws M3x6mm countersunk. Tapping kit (M3 and M5) - optional Assembly: - Remove Rubber handle…
Honeycomb Storage Wall Hot Wheels Holder with wheel detents.
Most DIY encoders feel cheap and flimsy. This concept model was designed from the ground up to provide a heavy, premium tactile detent using opposing magnetic forces rather than grinding mechanical parts. By utilizing a standard 608…
