Counting matching models…
EDIT: I forgot to add in the name kindly given to my cat by Mark "Velocity Painting" Wheadon ( https://t.co/LF6wu0B4sd ): Schrodinky! A couple of weeks ago, I posted a very cute picture on Twitter of a British Shorthair kitten sitting in…
Schrodinky said they were interested in seeing this scaled so I put it on a keycap
The dual extrusion version of my kitty sculpture. I created this to celebrate a BCN3D Sigma R17 joining my household. Files are arranged in the following configurations: loubie_cat_body_and_pupils_v13.stl loubie_cat_eyes_and_box_v13.stl…
Stojan na hodinky Garmin Forerunner a všechny typy toho druhu, které mají otvor pro nabíjecí konektor na zadní straně vlevo nebo vpravo (dle zrcadlení ve sliceru). Stojan má v sobě veliký otvor na prostrčení řemínku hodinek a jeden menší…
Blocks rear travel of Floyd Rose to allow for traditional trem use w/ improved tuning stability. Fits JS32 Jackson Dinky
I made this quick model to support some small weaker plants. Push onto bamboo skewers to form the needed support. I use them in a triangular fashion as seen in the pictures. Intended for round skewers with about 3 mm diameter.
Closed Tremolo Cover for the Jackson Dinky. Used on my JS32 with Floyd Rose. Attach with M3 screws.
Given to family for DIY Christmas Presents. Roughly palm sized. Requires a 1.5in (about 37mm I guess) drywall nail as a hinge pin and a rubberband. (I guess you could print this part, it just happened to be what I used as a base for the…
This is a replacement backplate for a Jackson Dinky guitar with an access hole to make adjustments to (in my case) a Tremol-No. Could also be used to access other tremelo stabilizers or blocks. It may work with other models, but I can't…
tištěno na tiskárně Prusa Mini+, materiál PETG, podpěry ano, styl Přiléhavý nepotřebuje lepení, stačí dobře sesadit a drží dobře English: printed on Prusa Mini+ printer, PETG material, supports yes, style Snug no gluing needed, just…
A beautiful minimalist painting of a Pocket watch on the wall or with a stand on the table. Size 147 x 201 mm You can find the small print stand for the table on my profile ↓…
Držák na rám postele a je lehce vyztužený Šířka rámu 2,2 cm Model je poskládaný z kostek - jednoduchá úprava na váš rám Prusa Mini: tisk 7h33m, 92,15g filamentu, délka 31m
A small dinky dip with 3 ink wells. You can use the soda caps to close the ink wells. Use with or without the stand for the 3 pens. Print with 3 or more walls to make it water tight. No support required.
Jednoduché pojištění řemínku. Přidaná hodnota je v zakřivení podle profilu ruky. Simple strap safety buckle. The added value is in the curvature according to the hand profile.
Hodinky Rolex (hodinová hlava) - Rolex watch (watch head)
This Dinky Toys model came back to me when my mother moved to the nursing home. As it was heavily used by my younger brothers, I had to do some cleaning. Unfortunately the tyres were missing. So I designed and printed the tyres with black…
Stojánek na přivrtání pro nabíjecí stanici hodinek.
Náhradní uchycení pro utržené dětské hodinky. Jedná se o dvoudílný model - průvlek na pásek a zadní stranu ciferníku Díly je zapotřebí přilepit k sobě - šlo by je sice vytisknout jako jeden celek, ale bylo by to moc komplikované. Velikost…
About ten years ago, I purchased a pen and ink holder, but I found that the ink holder's hole was not compatible with my ink jar. To solve this, I designed an adapter using Blender that allows my Dinky Dip to sit at a 45-degree angle,…
Replacement torpedo discs for the Dinky USS Enterprise (Dinky 358) These will also fit the Klingon Cruiser (Dinky 357)
Cílem bylo aby hodinky neležely na stole, ale bylo pořád vidět kolik je hodin. Využil jsem výhody “magnetického” uchycení při nabíjení. Taky jsem chtěl vyzkoušet vícebarevný tisk na mono tiskárně.
Řemínek pro hodinky NICEBOY WATCH LITE 3. Šířka řemínku 20 mm, výplň 15%, material TPU96. Tisk bez podpěr. Doporučuji každou část tisknout extra.
Holds 3 dinky dips. The plastic, screw top kind - the bases are the same for different volumes. The octagonal base fits into the same shape in the bottom of the hole so the dinky dip won't turn while you turn the top. A tray for small…
bude pasovat i na jine chytre hodinky pro 16mm reminek pridana verze pro 20mm reminek
Dvoudílný stojánek pro hodinky Madvell. Podpěru je potřeba použít pouze u stojanu. Vytištěno s PLA 15% výplň. Horní část se nasadí na čep stojanu. Je to těsné, tak záleží na nastavení tiskárny. Two-piece stand for Madvell watches. The…
Remix of Jor-el19's Thingiverse Space 1999 12" Eagle Stand resized and remixed for Dinky Sized Eagles. Printed in Econofil PLA Light Grey. Files include plain, embossed with a cross and with a cross cutout for lighting with leds from…
EN: WATCH KEEPER -I created this model because the old one broke. -You can choose from 100% all the way up to 150% so it suits your needs. Print settings: 2 walls 0,2 mm layers 0,4 mm nozzle any infill you want (recommended 100%) CZ:…
Dvoudílný stojánek pro hodinky iGet Fit3. Podpěru je potřeba použít pouze u stojanu. Vytištěno s PLA 15% výplň. Horní část se nasadí na čep stojanu. Je to těsné, tak záleží na nastavení tiskárny. Two-piece stand for iGet Fit3 watch.…
Replacement for a missing or damaged deflector dish for the Dinky Toys USS Enterprise NCC-1701 die-cast model (No. 358, released 1976). Compatible with the original Dinky Toys Enterprise hull - simply dismantle the hull. There is a single…
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/j28ETLLWCEi Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: Yes Resolution: .10 Infill: 50% Filament: Prusament PETG Black Notes:…
Holds 49 Dinky Dip Vials. Sized for the plastic screw top ones. The glass and snap-top ones are different sizes - just scale it in your slicer. Printed fine with the legs up in both PETG and PLA.
Tracks to fit a Dinky UFO Shado 2 mobile. With the design being a cross between the Dinky and the original in the TV series. Can be printed horizontally with no support material. As the print is not for a flexible material its for for…
Přípravek k rovnoměrnému zacvaknutí zadního krytu hodinek Casio po výměně baterie
Dinky la licorne Infill a 15% Support pour la queue Vitesse a 200mm/s et first layer a 50
Stojánek je určen pro nabíjení a odkládání hodinek Niceboy. Ve spodní části je prostor pro krabičku se sluchátky Niceboy.
