Counting matching models…
This is a mount designed for the Hamamatsu C10508-01 Avalanche Photodiode (APD) module . The purpose of the mount is twofold: 1) to enable the integration of the APD module into optomechanical setups; and 2) to provide a protective cover…
Change Log V3 Lower light bolt hole moved forward to allow for greater range of motion for lower light Reinforced the slot in the frame that interfaces with the lower headlight mount of the headlight mask. V2 Overhangs improved for more…
I designed this to bend several diodes at once for some of the mechanical keyboard kits I've been building. This helps keep the bends consistent so they look nice on boards where the components are exposed. It's also helpful being able to…
My manual Z-axis ( https://www.thingiverse.com/thing:5145644 ) works quite nicely but is overkill for a light-weight laser module. It can be a pain to assemble if the printed fits are particularly tight and requires polished rod and…
Very simple design: this jig allows to bend quickly and repeatedly diodes for the Redox keyboard PCB. Print instructions Category: Electronics Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: No Resolution: 150µm…
This will bracket will allow you to mount Diode Dynamics SSC1 LED Pod in place of OEM FJ cruiser mirror light -The Cover will fit both the Driver and Passenger side, but the bracket the side specific. *Note: This will require running new…
combination of the origiinal diode bender and the lead bending jig :-) If you like my work and would like to support me, please consider donating to my tinkerfund - http://paypal.me/sabitech2k
Diese ist ein Halter um einen Kreuzlaser mit einem Durchmesser von 12mm an einem Cloudray Laserkopf aus der K Serie zu Montieren. Die idee stammt von raptor_demon ich habe es aber neu gezeichnet und die Masse angepasst an Cloudray.…
Ok here is my version of @ThothLoki rotary axis for my eleksmaker a3 diode laser. Mine is designed for a nema 17 and replaces either the x or y axis on your laser. I use t2 laser to convert the lateral movement into rotational movement.…
adds a air assist to a 40 mm diode laser engraver. should give you slightly better cutting performance by clearing ash from the cut and increase the life span of your laser diode by blowing the smoke away from the lens. tested on my…
Printed the original model. I am using air assist and the model requires modification for that because of a valve stem that sticks on the side, and because it changes the dimension of what is at the bottom of the diode. I made this remix.…
With certain models of TwoTrees diode laser rigs, including TTS-25 (2.5W), TTS-55 (5.5W), TTS-10, a 3D-printed holder comes with it, that holds the nice “Focus Assist Metal Column.” In my case the hole was too small (too tight for the…
This is a model to attach an air assist to a NeJe laser module that I have on my Eleksmaker laser form banggood. It is printed in PLA with the tube on its side. The main body attached via the four screws on the top of the laser module,…
I created this model in OpenSCAD and then applied the callsign text in Bambu Slicer. I've included an example STL with my callsign, KQ4VYY. To print this model, I use a Bambu P1P with AMS for dual colors and a 0.2mm nozzle, but this could…
Inexpensive diode laser cutter engravers rarely come with a enclosure. This can be a safety hazard for your eyes. This is a simple trick that costs pennies and reduces the risk substantially. It also helps with laser focus and directing…
Neatly park your RX and Cap between two standoffs.
Created with OnShape: https://cad.onshape.com/documents/69f25f92cf286322e3ede378/w/64538863a6b45e4f25785fab/e/9af81d9c43e683c16ab986c1
The speaker/mic rubber port cover of my Radioddity GD-77 crumbled to pieces, so I designed from scratch this replacement port cover. I recommend printing it in TPU, with no supports. If you have a rough textured PEI bed sheet, the look of…
Pernas 150 mm mais longas para o laser de diodo Two Trees TTS-55, facilitando a gravação e o corte de objetos mais altos e em leitos de favo de mel. Substitui as pernas originais. você pode adicionar almofadas antiderrapantes sob as…
ABOUT THIS MODEL: 2022 Subaru BRZ Fog Light Brackets for Diode Dynamics SS2 SAE Fog Lights After 2 months of development and 5 revisions of this design, I now have the “final” revision printed and mounted on my 2022 Subaru BRZ (as of this…
Handles for protecting front and back of the radio while also raising it over surface. Printed from PETG. Create opposite piece by mirroring object in slicer software. Glued 4x round rubber feet (up to 8mm diameter).
Little two-part tool for bending the leads of resistors/diodes/other axial components. Fits 20 components at once. Default lead spacing is 10mm, Fusion file can be easily adjusted to other spacings.
Since all of the storing solutions that I've found required too much filament for this simple task, I've decided to design my own. One card can be printed with less than 7 grams of filament and can hold 3 “sheets” of resistors (3x20=60…
If you build this so it can also do vertical engraving, you might want to also make the self centering turntable to engrave cylindrical objects. https://www.printables.com/model/163956-self-centering-turntable-for-use-with-vertical-las…
A small box for the resistors and diodes of the arduino starter kit. One variant with values and one without.
Holder for 2 pieces of LR41 batteries, which serve as a power source for the diode. Useful for lighting the interior of objects, such as in the picture attached. Print Settings Rafts: No Supports: No Resolution: 0,2 Infill: 20% Filament:…
Description : This instrument has some useful functions for Arduino users. Besides being a voltmeter with data logging, it could answer questions like "how much voltage falls on the LED at 10mA current?" or "is this an IR LED or what?" by…
Quick & dirty simple diode jig for 8mm holes. Accepts 10 diodes at a time. Insert diodes into holes, bend by hand. Fold diodes flat and cut to remove tape. Originally designed for building the split keyboard ErgoDonk Zero .
Clips to make Ikea Dioder LED bars clip nicely into an Ikea Detolf case. Print instructions Print six of the light bar clips to attach the Dioder Bars to the Detolf rails. Print a bunch of the wire clips to keep the Dioder wires tidy.…
An adapter kit for Diode Dynamics Stage Series 3" Standard LED Pod to adapt it for Toyota fog light longer screws are needed Category: Automotive
Druckeinstellungen PLA Füllung 20% Schichthöhe 0,3mm Rand: “Diode_Boden-Stifte” und “Diode_oben” Stützen: “Diode_oben”
Remixed by combining a BTech UV-Pro desk stand and an Anytone 878 cupholder. Desk stand: https://www.printables.com/model/1187652-btech-uv-pro-desk-stand Cup holder: https://www.thingiverse.com/thing:4623043 Printed mine on a Elegoo…
Laser Diode Simple Fan Assist (40mm Fan) (40mm Diode) By Brian Khuu December 17, 2020 This is a 40mm fan mount for a laser diode 40mm . There are many other more effective air assist option, but this has the advantage of being a quick and…
Light Emitting Diode model mainly used as educational model.
Remixed my own design to add space for a diode. This is useful for cases where you leave the buck converter connected to a battery all the time to prevent current back-flow. Category: Electronics
6mm Laser Diode to 9mm Holder Adapter lets 6mm laser diodes fit in a 9mm holder, for some reason most K40 aiming laser diodes were designed around 9mm laser diodes.
I like HamRadioDude's wire winder design, but wanted band numbers on the winder to indicate what it's tuned for. Haven't printed this yet but you may want to add minor supports at the bottom for the numbers.
3D printed holders for Yaesu FT-70D, Radioddity GD-77, and Yaesu VX-5R HAM radios There are multiple versions of the Yaesu FT-70D holder, one with a larger base (feet). I first designed these using Moment of Inspiration, then I redesigned…
Ich habe Halter konstruiert um die Dioder Strip's von IKEA an meinen Anycubic i3 Mega S zu montieren. Diese werden nur gesteckt und können bei Bedarf schnell entfernt werden. Es werden 6x Halter benötigt.…
Case for 9V battery and multifunction tester like this one: https://www.aliexpress.com/item/NFLC-Multifunction-LCD-Backlight-Transistor-Tester-Diode-Triode-Capacitance-ESR-Meter-MOS-PNP-NPN-LCR/32792645604.html Current version has some…
Model 4 grzybów w których możemy zamontować 5mm diody LED RGB lub inne, tego rozmiaru, zasilane portem USB-C. Niestety model nie spełnia moich oczekiwań co do jakości więc nie chcę za niego nic. Kapelusze pasują do nóżek, numerycznie 1 do…
This is a Gridfinity storage container for electronic components. It is stackable, can be used with the Gridfinity type magnets, and has 17 individual compartments. I usually put two resistor values in the same compartment, so with one…
Update: Added a file for shorter screws in the 1/4-20 t-nut assembly. Two stands to hold a 10 mm laser diode on 8020 series 10 extrusions. The stand is 75mm tall and the laser is centered at 60mm above the surface of the extrusion. It is…
After looking all over for a rotary axis for my diode laser, I tried a few on thingiverse, but none worked well for me. As I am not working on anything huge and do not need much torque, I decided to design my own direct drive Rotary Axis.…
This is a bending tool for through hole parts like diodes and resistors with 8mm pitch. Print Settings Printer Brand: Prusa Printer: i3 MK2.5 Rafts: Doesn't Matter Supports: No Resolution: .2 Infill: 20% Filament: PLA Category: Tools
Wanted a bender that would work with diodes that come attached to a tape reel. I just adjusted the spacing of Flehrads bender. Im not sure how standardised the spacing on the tapes is so i provided a smaller tester piece you can use to…
Inspired by oldschool glass bulbs I created in same shapes these LED bulbs covers. It is suited for 5mm diameter LED diods with cylinder shape (flat top). We are using these -…
When I went to install my Diode Dynamics headlights for the 2015 Civic SI, I noted that their adjustable collar did not provide enough offset to allow for the screw heads. So the bulbs just wouldn't lock in. I got out my micrometer and…
If you have opened your OpenEnergyMonitor Photodiode Optical Utility Meter LED Pulse Sensor housing to desolder the LED like me, then you'll need to print a new one. The OEM sensor housing is glued together, I used a hot air gun to try…
Case for XM74610 ideal diode. There are 2 versions: Top wire (Orange in picture): for when you solder the wire on top of the board. Slim and have no hole for heatsink. This diode should be good without heatsink up to 6-7a in my testing.…
A mount for a 50A Ideal Diode that will allow current to flow in one direction. Handy for solar and battery projects. Modules where found on Ebay and AliExpress.
Laser Diode mount with 0.55" ID, and M3 hardware for XYZ adjustability. Base of mount has holes for mounting 0.25" dia magnets to use on steel plates/tables. Could be drilled out for actual optical breadboards. Use 30+% infill for overall…
This 3D model features a compact representation of a diode schematic diagram, perfect for electronics enthusiasts and professionals. Designed as a keychain, it’s both a functional accessory and a conversation starter. The keychain is easy…
Mobile mount for Raddioddity GM-30 Plus GMRS radio. This is designed to be used with a Bullet Mounting system but it can be adapted to any mounting system. There is a ¼-20 size hole in the back to place a screw to attach the holder. I…
A foot to mount your diode laser (with acrylic legs) in a fixed point on your spoil board. Allows for easy removal. Mount with glue or screws. Deigned for use with the Fokoos FE20, but should work with other lasers that use acrylic legs.
Wanted a quick and repeatable way to mount my diode laser to my CNC machine. Fits 65-66 mm routers. Used 10 8x3 mm magnets and a 15mm m5 screw for the clamp.
Clip for the DIODER LED strip from IKEA. Angled by 45° for a good lighting in my Lack enclosure. Screwed to the table legs using wood screws with 4mm diameter. The dioder strips fit snug so they will not move. I am not sure whether there…
These are drawer pulls I designed. I included both 3 inch and 3 1/4 versions of the leads. The screws are modeled for 8-32 screws and they fit a little tight, but it works well. They are designed for MMU printing. In my experience the…
USE PROPER SAFETY GEAR WHEN USING LASERS, EVEN WHEN TESTING! So, I came over this guide on instructables by user marzsolt for mounting a laser diode on your MK3 to do some simple engraving. While the guide was great, I thought the mount…
I use 5V 650nm laser diodes, pointed at light sensors, as finish-line timers in my pinewood derby track. These modules hold the diode and help me fine-tune the beam to point directly at the light sensor. They're designed to fit in 2…
3d printed bracket that mounts on the side of the spindle using one of the original screws holes. Fits a laser module which is 30mm wide. Mine is the Neje 20w diode laser. Laser connects with 2 M3 8mm screws. Bracket uses a M5 12mm screw…
A bracket for simple red dot laser diode, to be mounted onto wood with screws.
Made for tealight with a diameter of 3.95mm. Suitable for LED tealights as well as real candles. Print one of the “lower” and one of the “upper” They fit quite nicely together. The lampshade has to be rotated 180 degrees. So the smaller…
Onshape link https://cad.onshape.com/documents/d986d0824ff753d17a25984c/w/929a7c91fb0e235bbe76250e/e/1665391de84a7acd0c479203?renderMode=0&uiState=67a10c7157d0d17c554e06dc Uses a pair of M3 bolts & nuts
After watching The LA Hobby Guy's video about adding colored powder to etchings I decided to have a go at a solution for one of the problems he discovered. The cooling fan for the laser head was blowing the lighter powders off the surface…
A simple bracket to mount your IKEA dioder (RGB) to any surface with two #6 screws. Can be printed flat with no issues.
Simple resistor sorter to help you through your electronic builds. Ready, set, solder! Category: Electronics
Dieses 3D-gedruckte Gehäuse ist speziell entworfen, um eine Fotodiode (OSRAM BPW21)zu halten, die verwendet wird, um das Flimmern von Lampen mit einem Oszilloskop zu messen. Es verfügt eine Öffnung für den BNC Stecker sowie eine…
This is presentation of the concept and elements I used to make ventilation connections to a cabinet with a 3D printer and to a box with a laser cutter using the objects published here and a plastic flexible PVC hose with a diameter of…
individual box to place the tl smoother near the stepper motor The box is fixed on its support, from the inside or the outside (2x diam 5mm ) published on thingiverse : https://www.thingiverse.com/thing:3399073
This stand works with both the Pro and the Sport versions. Needed: 1x Diode Dynamics SSC2 LED Light 1x M5x50mm cap head bolt 1x Nyloc M5 nut
Someone requested the CAD files from my video … So that's why this page exists (: The video in question: I have put no work into making this understandable or easy to print or whatever. It's just the files straight of my computer. Do…
Another take to mount the IKEA Dioder bars to an Ender 3. The holders slide in from the side into the 2020 V-Slot Extrusion. You'll need to print two of course. It's a quite tight fit by design so it doesn't wiggle around, you can…
Simple wall holder to organize Your handheld HAM radio from Radioditty. Printed in TPU required for firm holding.
Laser Diode Stand This simple stand holds a 5v laser diode in place, with a simple hinge for up/down positioning. A cable clip on the base protects soldered joints on cables, and mounting holes on the front can be used for securing cables…
Screw mount for Ikea DIODER led strips
This is both a mount and a diffuser for an Ikea Dioder led strip (25 cm length). I needed the diffuser, but since I designed the diffuser it was easy to put the mounting points on the other side and make a mount version, so without…
This is a case for the Sainsmart Huhushop Mega328 Tester/Meter. This case also contains a battery compartment and sliding panel for access to change the battery. The tester itself will automatically determine the component attached to it…
This jig allows one to stand up the Radioddity HF-009 vertical antenna with a simple 1" hole diameter weight plate. It also has a hexagonal hole in the bottom that one can put a ¼"-20 rod connector nut into. This allows one to mount this…
A simple stand to hold a 10 mm laser diode. The stand is 75mm tall and the laser is centered at 60mm. Print instructions Unassociated tags: laser diode Category: Electronics
Etui de rangementpour Laser Diode Atomstack P1
Krabička a spínač pro mini svítilnu. Dokoupit je potřeba diodu a plochou baterii. Případně rezistor pro delší životnost.
This is a remix of the original mount for use with MK3s without the need to unscrew the fan. Mounting is for my Endurance 10W Laser module. Uploaded STEP file as well so you can adapt it for your own laser. IMPORTANT NOTE: The firmware of…
Ikea make small round LED lights for fitting in cupboards in 4 packs. When you are chilling out in the evenings with the lights dimmed it is annoying to have the direct light shining at you from the LEDs. This shade is push-fit and solves…
Bracket to allow a SSC2/SSC1 combo to be used on ditch light. The model is made for the 2021 F150 Diode Dynamics ditch light bracket a flat bottom (No lip) is included for other application. Would recommend printing out of PETG or…
Model holds 2 dioder lights about 105mm from the top aluminum extrusion on an Ender 3. This is designed to fit the RGB dioder lights. Printed in PLA with 10% infill and 0.3mm layers.
Podložka pro 5 led diod o rozměru 8mm (3w LED 3,6v). Pasuje do originálního kulatého blinkru na Simson S51.
fell free to modify or if you need some mod's just ask D:
Simple too to match my pcb :) ~7mm distance between holes Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 80 Infill: 38 Filament: EasyPla PLA Category: Hand Tools
Remix to fit the new design with angled fan and for my specific laser. Just a quick TinkerCAD remix so not really fancy but works :) Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: Yes Resolution: 0.2 Infill: 50%…
This mount can be used to attach an ESP32 with an photo resistor to the powermeter Easymeter Q3M. I glued in two 10x2.5mm magnets to attach the mount to the powermeter which already features a metal ring around the IR diode. I provide all…
**If you print it please post a make and let me know how I could improve the model Purchased some led switchback modules for my side by side DIY street legal project. Modules come sealed but no real way to mount them besides double sided…
This is a simple little box that holds a flyback diode for solenoid flyback protection in my virtual pinball cabinet: http://lilmikey.com/2017/02/16/virtual-pinball-cabinet/ The diode is needed to 'short circuit' any current caused by the…
This is an Openscad program that generates SVGs that then drive Laser Cutters. This is designed to work with black foam board which cuts quickly and easily on low power diode lasers. The design of the box is such that the lid is made of 5…
These Ideal Diodes work just like a diode, but have practically no voltage drop. Prefect for battery protection and solar panel projects. You can get them here: 50A Solar Panel Battery Charging Anti Reverse Irrigation Protection Ideal…
Cable Stiffener (protector) for Diode laser with 8mm Air Assist hose guide. I made it for my 20W Foxalien Laser. The model will work with many other lasers but check dimensions before printing.
This device displays the forward voltage of an LED or Zener diode. Assembly is straightforward—use the included wiring diagram for reference. Safety Warning: Li-Po batteries can be hazardous if mishandled. Always use a proper charger…
Some of my bigger diodes didn't fit the original model so I made a few more sizes for the middle piece
Quel que pièce simple électronique.
