Counting matching models…
To complete my Mirka DEROS sander and don't have to take it out for small and quick jobs, I designed and 3D printed sanding blocks for the 125mm and 150mm sanding disks I use Design Design from Fusion 360 is quite simple. I started from…
These brackets can be used with any of the Synology DiskStation 2 bay Plus, Value, or J series NAS: DS218, DS223j, DS223, DS224+, etc. Space the brackets 140mm apart and the flange will trap the Synology's feet preventing it from sliding…
Update March 16th 2024: Added Fusion360 files, to make it easier to create your own tracks Print instruction Print parts upside down with 0 solid top layers to save material. The track surface will adopt the print bed surface. Use…
No change to the original model instructions.
Mini ITX NAS with external power supply and 6 HDDs bays. Print parts with 30% infill and 0.20mm (Standard Quality) The dust.stl must be printed without top and bottom layers and with 75% or more infill. The…
The worst nightmare of ABS printing is warping. These disks almost reduce completely warping. Instructions Add a disk at each corner of the 3D object you want to print at the bed level. Most of the time, a 1 cm disks does the job. More…
A cradle designed to hold the 100W power adapter for certain Synology DiskStation NAS units. Specifically, the model “Adapter 100W_2” AKA “Adapter 100W Level VI” (Dimensions 13.7 x5.9 x3.5 cm, currently used by NAS models DS920+, DS918+,…
These are Celtic knot bobbin ends for the 3d printer friendly bobbin designed by Maurice for the EEW 6. These are the same designs as on my nano bobbins, but sized up and put on the bobbin ends for the EEW6 from Maurice's printable…
This model is based on the Bambu Lab Reusable Spool - Minimal Version, but with the center hole adjusted to fit the axle of the Winder Spool Holder of the Bambu Lab Filament Spool Switcher. It uses the same 0.2mm solid infill as the…
Taking advantage of the exit of ant-man and wasp movie, I will upload this design of one of the objects that I have made of Marvel. These are the pym disks of Ant-Man. The Pym Particles Discs are a complementary weapons technology for the…
Needed stuff, made stuff. I have couple of spools slightly over 70mm width that didn't fit with the original axle so slimmed the stoppers down. Axle is basically remodeled in OpenSCAD since I couldn't mod the original STL. Also the…
Time Capsule alike sized case for harkenel's odroid-hc4 board and two 2,5'' ssd/hdd disks supports only 2,5'' Disks (up to 20+/-5 mm height - like 4 or 5 TB models) everything, except hdd_holders, can be printed without supports Update…
This is a great little sanding pad for 50mm velcro sanding disks, that speeds up sanding on a wood lathe. I have a video using it on my YouTube channel. And there is also a video where I built this thing by hand. You also need to watch…
This is for Zach Freedman's Gridfinity System. I don't who still uses MiniDisks, but I do. It's a 2x2 Gridfinity Holder for 9 MiniDisks. It has magnet holes.
Power Rangers Ninja Storm - Thunder Morpher Discs V3 Model (Final Version) is now available: NO AMS REQUIRED - ONLY 1 COLOUR CHANGE - NO SUPPORTS There are two versions available: No Clip (Display) - Designed to sit snugly on the original…
A simple tub that can hold 125mm grinding disks.
Modello semplice porta dischetti e cotton fioc, con coperchio
Stack the grits you need on one side, finest at the bottom, then as you use them move them to the other side. Print flat side down, any filament, infill about 15%, 3 perimeters is better than 2. If you don't want them this tall, just…
This is a simple box to keep 10 sets of FilaScope disks organized. This may be already a bit outdated, as Steve released a new and improved swatch-like test method, but may be handy for those (like me) who already printed some disk test…
This is not standalone, combine this with the Ultimate Filament Respooler . Print it, and stick it on it. It is flat, but holds just fine.
Little mouse for hand sanding with ø125mm disks. *) QnD: Quick and dirty
The new Phillips pasta maker is really great but it doesn't have the same amount of disks you can have from the others, so I decided to make my own. I found something on Thingiverse, but it fits tight and it is only STL while I like…
Modified to clip into the thunder morpher, while letting the wings still open/close smoothly
Update: 02_04_26 Found the rock sludge was blocking up the drain holes very quickly so I have uploaded an alternative bowl with a G38 thread for a 10mm OD tube. Amazon link to connector: TA-VIGOR 10mm Pneumatic Push to Connect Fittings,…
Dropped these dumbbells and a disk broke so I printed a replacement! Print 1 disk or swap them all. I printed them at 35% infill, 4 wall, and with supports.
Dock station / External HDD case / RAID box for 5 disks (3.5" or 2.5" HDD/SSD with SATA interface) FreeCAD source in attachment - customize for your needs! Parts: USB Type-C to SATA controller:…
Designed a strong wall mount for Synology Diskstations with two drives. I wanted the Diskstations to be easily removed from the mount, so I added a gap in the wall mount where the feet of the disk station fall into. The model consists of…
I was looking for a year counter for a calendar and came across the excellent Mechanical Tally Counter 5.0 design by FredrikHamrebjorkDesigns and so remixed it for my calendar to count the years. I have since stop working on the calendar,…
Use these tools to add seam allowance to your sewing pattern: either increase the existing seam allowance or add more seam allowance. Sizes Available is both a set of metric and imperial tools. Metric tools range from 5mm to 25mm in 5mm…
A5 notebook cover for discbound system. The cover is slightly wider than A5 to accommodate separators and pouches. Two thicknesses are provided, the 1.4mm ones is thick enough to be used as a writing board. For making easier to put the…
Simple locking detent disk pair to be used for projects where a rotating arm or plate needs to be locked into place after positioning. Included in the model files are example prints along with the male/female keys and detents. You'll need…
Skadis Mount Brackets for Synology DS223 NAS Remix of the wall mount from @Hemi345 and the skadis supports from Ryan Plourde These brackets can be used with any Synology DiskStation 2-bay Plus, Value, or J-series NAS: DS218, DS223j,…
A simple model to keep my drawer more organized. Fusion file provided so you can change diameters etc if needed!
If you have a glass floor mat and it's on carpet you are probably dealing with it sliding around and having to keep moving it back into position. Print in pla and place one of these pads under each corner of the mat using 2 sided tape and…
This hot-swap drive tray fits the Supermicro SC743 chassis
HueForge is a brilliant idea if you want to know more about it click here In order to get the most out of your filament for the program, you need to print the transmission discs, so I had the idea of designing a storage option Just choose…
For those who have purchased Koss headband off of Aliexpress, most of the time, the sides are missing the metallic circular plate on left and right side. I made a small disk with Koss letters STL from @TurboFalcon_1599428 . The diameter…
Für meinen Tellerschleifer DSM 250 von Holzmann benötigte ich eine neue Absaugung. Die alte war mir mit den 3 kleinen Schrauben zu fummelig zu montieren. Immer wenn das Schleifpad gewechselt wird (Klett) musste alles umständlich…
Simply slide your grid storage system into place for easy access in your workshop.
Back side 3 disks holder. Modelled for SATA-to-USB with enclosure or 2.5" models with its own case, like WD Elements and NVME with enclosure like UGREEN CM767. Modelled from scratch, but highly inspired by…
Bring order to your filament samples, up to 40 samples at once. Desinged for floppydisk samples made by @BeaRes
Damping foot for Synology DiskStation to isolate the HDD sounds from the rest of my house
Disks with sprue to use to hold down corners Add these to your gallery:
Simple box for old 8 inch diskettes.
So this is my holder for abrasive disk i would recomend to print them with 5-10% infill. I have desing it if you could say so to hold 10x 125mm disks at a time.
This is a storage container for abrasive fibre/fiber disks. They tend to bend into a tube over time and this container prevents that and plus, the disks are stored together. The container as it stands is designed to hold about 20 disks -…
I Designed this box to store my anglegrinder disks. The overall box i made with the GridfinityGenerator This is a remix of the Gridfinity system developed by https://www.youtube.com/c/zackfreedman Category: Tool Holders & Boxes
So this is my holder for abrasive disk i would recomend to print them with 5-10% infill. I have desing it if you could say so to hold 10x 150mm disks at a time.
NOTE: This model is not sponsored or affiliated with a specific company. Disks for a baby play gym, hang any sort of objects you'd like from them and customize the experience! Standard - Matches the dimensions of the stock LEKA as closely…
I was using a N20 3v 15rpm motor and the base disc was a little slow for it. For my motor and DF64, 8-noches disc are suitable. If you are using a motor with a different rpm, then print the required disk from the models provided.
Replacement Part for the DiskStation 212j model. You need a blue 5mm LED and a 6x6x8mm pushbutton. Soldering skills needed, as you need to disassemble the 212j LED Board, remove the old button and solder wires from the button and the LED…
Holds 12 3.5 inch floppy disks, small footprint, prints without supports. The floppies are easily viewable and easy to insert and remove. Prints in about an hour and a half, and uses less than 40 grams of filament.
держатель шлифовальных дисков в выдвижной ящик. Рисовал для своего ящика, но и вам пригодится. Расстояние меж щек не позволяет диску выпасть при монтаже на наклонной поверхности.
Support for reusable cotton disks based on the Ikea TISKEN suction cup. Please print with the supports enabled
This is a tool for assembling printed discs, so you don't break the threads during assembly. Screw M4 х 50 - 1 pcs. Extended nut M4x7x12 - 1 pcs. 0.2mm layer, 5 walls, 50% infill Check out my collection of wheels for RC cars:…
Fits 1/2" arbor bench grinders from WEN. Designed to be placed between the conical metal washer and the polishing wheel. Helps prevent the polishing disk from slipping on the arbor and ensures proper alignment. Print from TPU95-HF for…
So this is my holder for abrasive disk i would recomend to print them with 5-10% infill. I have desing it if you could say so to hold 10x 150mm disks at a time.
This hot-swap drive tray fits the Supermicro SC743 chassis
Simply slide your grid storage system into place for easy access in your workshop.
Bring order to your filament samples, up to 40 samples at once. Desinged for floppydisk samples made by @BeaRes
Damping foot for Synology DiskStation to isolate the HDD sounds from the rest of my house
This is a tool for assembling printed discs, so you don't break the threads during assembly. Screw M4 х 50 - 1 pcs. Extended nut M4x7x12 - 1 pcs. 0.2mm layer, 5 walls, 50% infill Check out my collection of wheels for RC cars:…
This is an HDD cage designed for the BitFenix Portal case, but it's versatile enough to be compatible with various PC cases. It offers maximum space utilization for small computer enclosures. Providing an efficient storage solution for…
The old holder for the cutting disks broke, so I had to reinforce the design a bit and make it more spacious.
Upgrade your reloading setup with our versatile holder for Lee Precision AUTO DISK disks. Available in two variations - bench/shelf top and wall mounted - our holders offer convenient storage solutions for your reloading accessories. Key…
Holder to attach to a DOMYOS Rack 500 to hold Locking Disks
These are some disks I printed for my son. He did the artwork. They are done in multiple parts with the disk in the middle being customisable. I did the disk with a filament change to get the two colour effect. Print Settings Printer…
Elyt – Table Lamp with Interchangeable Shade Disks Design table lamp featuring interchangeable front disks acting as shades to modulate ambiance and light diffusion. Easy to assemble, compatible with E14 LED bulbs. A unique decor piece,…
Print the needed diameter rings to use with your spools. Available now: 50 mm 55 mm 72 mm If you need other diameter use the file adapter_basic to create rings for your own spools. Just resize the outer ring as shown in pic.
Just modified them to be disks so I could add them to other models. Works well with filament changes to color without mmu/ams
I couldn't slice the Master_Rod.stl file in the original. The problem seemed to be in the disks, so I created a new file, copying the dimensions of the original. Print Settings Rafts: No Supports: No Category: Vehicles
I have filaments with 8cm inner diagonal drum too. I don't want to print spacers. So I added 10 cm diagonal disks to the end knobs. It looks ugly but it can be used. These parts ar remixed from https://www.thingiverse.com/thing:4746260…
Them vacuum bags are great for storing filament, but its sometimes hard to get the pump to start sucking as you are pressing down on the bag. The little ruff side of the bag gets squashed and the suctions doesn't start. I place these in…
Simple blank disks to paste stickers for your board games. Update 191113: Added square and hexagonal tokens. Print instructions Category: Toy & Game Accessories Summary Simple blank disks to paste stickers for your board games. Update…
Wall holder - knob to organize tools
the Driver is for long distance throws, and the putter is for short more accurate throws.
Handles for one inch velcro sanding disks I use for sanding out detailed pockets on CNC projects Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.2 Infill: 30% Filament: MatterHackers PLA…
Printed with 0.3mm layer height and 0.6 nozzle. User some self adhesive velcro to hold the Sanding Disks.
All planets and a few moons and dwarfs. Perfectly to scale; really puts things and perspective. Non-planetary objects are labelled in lowercase.
The "Disks" task is one of the tasks of the MacHAND hand performance assessment (MPA). Print Settings Printer Brand: Creality Printer: Ender-3 v2 Rafts: No Supports: No Resolution: 0.2mm Infill: 15% Filament: Any PLA Any Category: Hand…
