59 models
Octopus/Kraken door handle for design fans. This remix is based on https://www.thingiverse.com/thing:4836898
Print approx. €1.40–€1.72 excl. taxPreliminary estimate for one variant
hang stitch for a little holiday cheer on the corner of your doorframe
Print approx. €4.23–€5.16 excl. taxPreliminary estimate for one variant
It will print without support. The mounting holes are designed for M3 Screws. The length of the screws should be around 15 - 20 mm.
Print approx. €1.68–€2.05 excl. taxPreliminary estimate for PETGSource material: PET
Multicolor Version and Single Color Version. Multicolor is for Prusa MMU2S. You can use 3 screws to fix it to the Door. I recommend PETG and min. 30% Infill for Durability Mit 3 Schauben an der Innenseite des Türramens verschrauben.
Print approx. €1.53–€1.87 excl. taxPreliminary estimate for PETGSource material: PET
not much to say... just a tentacle as a doorhandle... Have fun with it! Category: Household
The DoorHan Transmitter 2 Pro key fob I use for my garage door has buttons that are easy to press by mistake, as they have low resistance and are in line with the top surface. I designed snap-on cover to hide the buttons a bit, so they…
The picture shows a door hanger that I have customised and printed. It can be customised however you like and can be rescaled to any size that you desire. Update: I have just added a STEP file for this model
This ist my replacement version for our bathroom door handle of our caravan trailer from Knaus. The old one broke. It's for a 7mm square bolt with a screw hole on the side to spread the bolt. Print with the flat side down and use support…
Doorhandle stopper for handle diameter 19 mm and bigger. Best printed with TPU95 for flexibility.
No replace. No screw. No glue. Just snap on the orig. handle
The slanted top door of the EnXLosure (a very nice minimalist enclosure) provides an excellent view of the print bed and easy access. I find myself using it far more often than the lower two doors. However, I wanted to address two…
simple qube with m4 nut insert. Super comfortable to use. Automatic stop for Printpause to insert the nut
Designed such that you can print it standing on the chamfer. In that orientation it should not break off that easy. Printed with a 0.4mm nozzle at 0.2mm layerheight; 4 walls & top/bottom layers recommended.
All parts are in this file. I am planning to optimize it in a later version.
Small replacement handle for the door of a hager univers z breaker box. Designed with a lot of margin around the moving parts, to make sure that it can rotate properly and safe some print time. If you'd prefer a tighter/wider fit, you can…
Fits to german standard-doors. The cap is really thin, be carefull on assembling.
I made this part because my original freezer doorhandle broke and needed a replacement. Category: Household
schim for doorhable so you dont need to glue magnet to plexiglass
My bedroom door was always closing itself while it should stay open during the day and the wedge was damaging it slowly so I decided to go with this part: It acts as a buffer between the the wardrobe and the handle so the handle does not…
A template to drill the holes for the doorhandles in your door. This is made for a backset of 50mm. If you need another backset, send me a message. I have made 2 versions, one with bushing and one without bushing slots. You can fit…
Replacement door handle of lever type with square shaft. A retention pin must be placed through the inner part of the handle and square shaft, ( a small hole will have to be drilled through the square shaft, or just print one! ) to secure…
I did not know where to hang my winter coat so I tried some door hangers I found on thingiverse. Most of them broke immediately or after some days - my coat was just too heavy. Other looked quite robust, but I did not like the design. So…
For myself, I made a diameter under 110, you will have a different diameter, so I attached .step so that you can set your own diameter.
Edited the doorhandle file for the v2.4 kit by LDO, but i cannot link to this since i got it from their github. Wanted to add my own supports and also increase the radius by 0.5mm so it fits the kit no. plate better.
Sauna doorhanger should work and print fine. Tell me if there are any mistakes.
I used Prusament Galaxy Silver PLA as printing material because especially the shaft has to be very stiff. Just assemble the parts together and it should hold firmly.
Simple, quick and easy to print doorhanger to fit most doors with a chamfer on the top. I took the dimensions from one that broke of, so it may not be the most clever or strong design, but it does the job and is surprisingly sturdy with…
a handy doorhanger to indicate to you college that the printer has a different nozzle installed. the doorhanger has two sides, one that indicate that a 0.6 nozzle is installed, the other side indicate that a 0.8 nozzle is installed. for…
Designed styled handle for my qidi. Attached whit doublesided tape. Printed from ABS, made to last! Holes are ovals, so many printers can handle it even whitout supports. Prinded on it's side, how it is oriented in file.
Basic design for our office cupboard door handles. The original ones break too easy on christmas parties... Print Settings Printer: CraftBot 3 Rafts: Doesn't Matter Supports: Yes Resolution: 0,3 Infill: 15% Filament: - PLA Post-Printing…
I wanted to make a door handle for the Prusa Core One that looks similar to the original one in steel. Hence I designed this two piece handle that you can just screw in existing holes using two M3x8mm screws . I also added slots for four…
In theory you just need two colored sides. the icons are totaly optional.
The source marked this model as adult content.
Core One Doorhandle. you need 2 x m02x20 Screws to fix the handle and 2 little magnets for the door.
It prevents contact between the edge of an 20mm Doorhandle and any surface. Flat contact is at minus 30 Degrees doorswing. Print in anything you want, 2-3 layers perimeter and 5 to 15% infill is sufficient and does some flex to the make.
Praktischer Türgriff für Terrassentüren – einfach zu montieren - Version Rund Dieser einfach zu montierende Türgriff ist die ideale Lösung für Terrassentüren, die außen keinen Griff zum Zuziehen haben. Der Griff lässt sich unkompliziert…
works on most doorhandles that i have personally. might have to adjust it to your sizing needs
Kitchen doorhandle holes interax 161 Printables in PLA or PETG
Attribution beforehand; I was inspired by a picture I saw online for a Prusament spool as a Christmas tree ornament, my first version had terrible quality and was a single model file, multi-color and supports required, I tossed that after…
Cover for doorhandle from 50s. Without keyhole. Krytka pre kľučku z 50. rokov ktorú som mal prasknutú. Bez kľúčovej dierky.
Hi just made some simple doorhandles for lackv2, should stay in place without any glue One version for 3mm thick acrylic and another one for 3.175mm(0.125 inches)
The model is designed in OpenSCAD, making it parametric and easily adjustable if needed. It aims to replicate the functionality and fit of the original harmonic door handle while potentially improving upon its design to prevent future…
I printed it on my Bambulab P1S using ASA. It worked very well with 30% infill, 3 wall lines and tree support structure; the rest according to the specifications of Bambulab ASA.
inspired by https://www.materialise.com/en/hands-free-door-opener , (Edit: found it just now on https://cults3d.com/en/3d-model/tool/printed-door-opener-to-help-against-the-spread-of-coronavirus ), so all credit for the idea goes to them!…
Praktischer Türgriff für Terrassentüren – einfach zu montieren Dieser einfach zu montierende Türgriff ist die ideale Lösung für Terrassentüren, die außen keinen Griff zum Zuziehen haben. Der Griff lässt sich unkompliziert mit einem Stück…
FreeCAD file included. I printed it in ASA as this is exposed to sunlight and the elements in my case. Warning: Beware of the spacing to your individual shutters as this is quite a bit larger than the original one.
use a little glue to make it stick.
A model of a doorhandle for my PLASTA enclosure.
FIAT 500L or Similar Door Handle Trim / Scratch Guard – 3D Printable File This is a downloadable 3D model file designed to create a custom-fit door handle trim and scratch guard for the FIAT 500L or similar vehicles. The design protects…
Had these plates already on some of my doors. But because i have an old house and did not change the doorlocks they did not sell them anymore for my size of doorholes. I could get the bigger ones and make the extra hole myself but i…
Bumper for door handles (16mm). Open-ended. 55m x 54mm x 3.3mm. Print in TPU (95A).
Doorhandle for Toyota Corona year 1982, model RT132
Had these plates already on some of my doors. But because i have an old house and did not change the doorlocks they did not sell them anymore for my size of doorholes. I could get the bigger ones and make the extra hole myself but i…
FreeCAD file included. I printed it in ASA as this is exposed to sunlight and the elements in my case. Warning: Beware of the spacing to your individual shutters as this is quite a bit larger than the original one.
