Wyniki wyszukiwania: doorhan

Lovecraftian Doorhandle

not much to say... just a tentacle as a doorhandle... Have fun with it! Category: Household

Kraken/Octopus design doorhandle

Octopus/Kraken door handle for design fans. This remix is based on https://www.thingiverse.com/thing:4836898

Button cover for DoorHan Transmitter 2 Pro

The DoorHan Transmitter 2 Pro key fob I use for my garage door has buttons that are easy to press by mistake, as they have low resistance and are in line with the top surface. I designed snap-on cover to hide the buttons a bit, so they…

Stitch Christmas Doorhanger

hang stitch for a little holiday cheer on the corner of your doorframe

Blank doorhanger template

The picture shows a door hanger that I have customised and printed. It can be customised however you like and can be rescaled to any size that you desire. Update: I have just added a STEP file for this model

Doorhanger

Printed in PRUSAMENT PETG carmin red.

Doorhandle for 7mm squarebolt Türgriff Türklinke Caravan Trailer Knaus

This ist my replacement version for our bathroom door handle of our caravan trailer from Knaus. The old one broke. It's for a 7mm square bolt with a screw hole on the side to spread the bolt. Print with the flat side down and use support…

doorhandle buffer / Türstopper

Doorhandle stopper for handle diameter 19 mm and bigger. Best printed with TPU95 for flexibility.

P1S, P2S doorhandle easy snap on version

No replace. No screw. No glue. Just snap on the orig. handle

stay the f#ck out - doorhanger

Ergonomic doorhandle for enXLosure

The slanted top door of the EnXLosure (a very nice minimalist enclosure) provides an excellent view of the print bed and easy access. I find myself using it far more often than the lower two doors. However, I wanted to address two…

qube as knob/doorhandle for closet door

simple qube with m4 nut insert. Super comfortable to use. Automatic stop for Printpause to insert the nut

Doorhandle for French Window

Designed such that you can print it standing on the chamfer. In that orientation it should not break off that easy. Printed with a 0.4mm nozzle at 0.2mm layerheight; 4 walls & top/bottom layers recommended.

Doorhandle simple

All parts are in this file. I am planning to optimize it in a later version.

Breakerbox Replacement Doorhandle

Small replacement handle for the door of a hager univers z breaker box. Designed with a lot of margin around the moving parts, to make sure that it can rotate properly and safe some print time. If you'd prefer a tighter/wider fit, you can…

Doorhandle

Fits to german standard-doors. The cap is really thin, be carefull on assembling.

Freezer doorhandle replacement

I made this part because my original freezer doorhandle broke and needed a replacement. Category: Household

Shim for doorhandle

schim for doorhable so you dont need to glue magnet to plexiglass

Prusa Enclosure - IKEA Lack Doorhandle

It will print without support. The mounting holes are designed for M3 Screws. The length of the screws should be around 15 - 20 mm.

Doorhandle Catch

My bedroom door was always closing itself while it should stay open during the day and the wedge was damaging it slowly so I decided to go with this part: It acts as a buffer between the the wardrobe and the handle so the handle does not…

balcony doorhandle

door handle for my balcony door

Doorhandle hole template

A template to drill the holes for the doorhandles in your door. This is made for a backset of 50mm. If you need another backset, send me a message. I have made 2 versions, one with bushing and one without bushing slots. You can fit…

Lever Doorhandle

Replacement door handle of lever type with square shaft. A retention pin must be placed through the inner part of the handle and square shaft, ( a small hole will have to be drilled through the square shaft, or just print one! ) to secure…

Sturdy Doorhanger for Heavy Coats

I did not know where to hang my winter coat so I tried some door hangers I found on thingiverse. Most of them broke immediately or after some days - my coat was just too heavy. Other looked quite robust, but I did not like the design. So…

Doorhan PHOTOCELL-PRO radial mount

For myself, I made a diameter under 110, you will have a different diameter, so I attached .step so that you can set your own diameter.

LDO Voron v2.4 kit Doorhandle nameplate

Edited the doorhandle file for the v2.4 kit by LDO, but i cannot link to this since i got it from their github. Wanted to add my own supports and also increase the radius by 0.5mm so it fits the kit no. plate better.

Finland Sauna Doorhanger

Sauna doorhanger should work and print fine. Tell me if there are any mistakes.

Balcony Doorhandle- Terrassentür Griff - Smart Home - Singe/Multi Color

Multicolor Version and Single Color Version. Multicolor is for Prusa MMU2S. You can use 3 screws to fix it to the Door. I recommend PETG and min. 30% Infill for Durability Mit 3 Schauben an der Innenseite des Türramens verschrauben.

Flat Mini Doorhandle

I used Prusament Galaxy Silver PLA as printing material because especially the shaft has to be very stiff. Just assemble the parts together and it should hold firmly.

Another Doorhanger

Simple, quick and easy to print doorhanger to fit most doors with a chamfer on the top. I took the dimensions from one that broke of, so it may not be the most clever or strong design, but it does the job and is surprisingly sturdy with…

Bambu lab p1s/carbon doorhanger nozzle indicator

a handy doorhanger to indicate to you college that the printer has a different nozzle installed. the doorhanger has two sides, one that indicate that a 0.6 nozzle is installed, the other side indicate that a 0.8 nozzle is installed. for…

Qidi Q1 Pro cool Doorhandle

Designed styled handle for my qidi. Attached whit doublesided tape. Printed from ABS, made to last! Holes are ovals, so many printers can handle it even whitout supports. Prinded on it's side, how it is oriented in file.

Doorhandle

Basic design for our office cupboard door handles. The original ones break too easy on christmas parties... Print Settings Printer: CraftBot 3 Rafts: Doesn't Matter Supports: Yes Resolution: 0,3 Infill: 15% Filament: - PLA Post-Printing…

CoreOne-DoorHandle

I wanted to make a door handle for the Prusa Core One that looks similar to the original one in steel. Hence I designed this two piece handle that you can just screw in existing holes using two M3x8mm screws . I also added slots for four…

Bathroom Doorhandle hanger

In theory you just need two colored sides. the icons are totaly optional.

Doorhanger

Core One Doorhandle

Core One Doorhandle. you need 2 x m02x20 Screws to fix the handle and 2 little magnets for the door.

Doorhandlecover

It prevents contact between the edge of an 20mm Doorhandle and any surface. Flat contact is at minus 30 Degrees doorswing. Print in anything you want, 2-3 layers perimeter and 5 to 15% infill is sufficient and does some flex to the make.

Doorhandel Round

Praktischer Türgriff für Terrassentüren – einfach zu montieren - Version Rund Dieser einfach zu montierende Türgriff ist die ideale Lösung für Terrassentüren, die außen keinen Griff zum Zuziehen haben. Der Griff lässt sich unkompliziert…

doorhandle spacer

works on most doorhandles that i have personally. might have to adjust it to your sizing needs

Kitchen doorhandle holes interax 161

Kitchen doorhandle holes interax 161 Printables in PLA or PETG

Filament Spool Doorhandle for Kallax or any other door

Attribution beforehand; I was inspired by a picture I saw online for a Prusament spool as a Christmas tree ornament, my first version had terrible quality and was a single model file, multi-color and supports required, I tossed that after…

Doorhandle cover

Cover for doorhandle from 50s. Without keyhole. Krytka pre kľučku z 50. rokov ktorú som mal prasknutú. Bez kľúčovej dierky.

Lackv2 doorhandle

Hi just made some simple doorhandles for lackv2, should stay in place without any glue One version for 3mm thick acrylic and another one for 3.175mm(0.125 inches)

SimpleDoorHandle

The model is designed in OpenSCAD, making it parametric and easily adjustable if needed. It aims to replicate the functionality and fit of the original harmonic door handle while potentially improving upon its design to prevent future…

Fridge doorhandle

I printed it on my Bambulab P1S using ASA. It worked very well with 30% infill, 3 wall lines and tree support structure; the rest according to the specifications of Bambulab ASA.

parametric covid19 hand free doorhandle

inspired by https://www.materialise.com/en/hands-free-door-opener , (Edit: found it just now on https://cults3d.com/en/3d-model/tool/printed-door-opener-to-help-against-the-spread-of-coronavirus ), so all credit for the idea goes to them!…

Doorhandel

Praktischer Türgriff für Terrassentüren – einfach zu montieren Dieser einfach zu montierende Türgriff ist die ideale Lösung für Terrassentüren, die außen keinen Griff zum Zuziehen haben. Der Griff lässt sich unkompliziert mit einem Stück…

DoorHandle with 48mm spacing

FreeCAD file included. I printed it in ASA as this is exposed to sunlight and the elements in my case. Warning: Beware of the spacing to your individual shutters as this is quite a bit larger than the original one.

landrover doorhandle

landrover doorhandle

doorhandle for an old 1970- door

use a little glue to make it stick.

Ikea PLASTA Doorhandle

A model of a doorhandle for my PLASTA enclosure.

FIAT 500L or Similar Doorhandle Trim/Scratchguard

FIAT 500L or Similar Door Handle Trim / Scratch Guard – 3D Printable File This is a downloadable 3D model file designed to create a custom-fit door handle trim and scratch guard for the FIAT 500L or similar vehicles. The design protects…

Doorhandle plate based on Noxxa aluline

Had these plates already on some of my doors. But because i have an old house and did not change the doorlocks they did not sell them anymore for my size of doorholes. I could get the bigger ones and make the extra hole myself but i…

"Don't even knock!" Doorhanger

Doorhandle Bumper - 16mm - open-ended

Bumper for door handles (16mm). Open-ended. 55m x 54mm x 3.3mm. Print in TPU (95A).

Toyota Corona RT132 82 Doorhandle

Doorhandle for Toyota Corona year 1982, model RT132

Doorhandle plate based on Noxxa aluline

Had these plates already on some of my doors. But because i have an old house and did not change the doorlocks they did not sell them anymore for my size of doorholes. I could get the bigger ones and make the extra hole myself but i…

DoorHandle with 48mm spacing

FreeCAD file included. I printed it in ASA as this is exposed to sunlight and the elements in my case. Warning: Beware of the spacing to your individual shutters as this is quite a bit larger than the original one.