Counting matching models…
I was looking for a decent G3 instant corner mount that allowed me to hide the power cable. I really liked the design of Tadufeu but it lacked the feature to hide my cables so I created a remix for this purpose. Don't mind the finish off…
This mod is a remix of 3 different objetcts to be mounted ontop a Voron 2.4 or Voron Trident or any 2020 Extrusion based printer. the Voron Switchwire spoolholder the ERCF Carrot Patch Fbeaukmi's 608ZZ Spool holder. Assembly should be…
The original file was for upward filament, I edited the original file so that the tube points downward for my LACK enclosure underneath. Make sure you rotate the model upside down to print it at an upward 45 degree angle. Print Settings…
Downward-facing stand for the Edifier R1280DB bookshelf speakers. The front bracket just fits between the speaker housing and the cover. — I would be very happy if you have as much fun with the things as I do. — If you like :-) Thank you…
If your P1P/P1S is on a high shelf, the display will be perfectly readable.
No special build instructions for this main body. The low profile nut only has two lines (circles) in contact with the printbed - mine stuck fine during printing but I added a 2-line skirt to reduce the chance of nozzle-snot messing up…
I tightened it a bit and adjusted it for using with a case and an angle, it is now a very snug fit Also simplified it and reduced the filament needed quite a bit. Enjoy all the cameras and microphone :)
Attractive YOGA sculpture consisting of two parts. Printing information Layer height: 0.20mm Infill: 10% Support: none Color change in the ring at 5.60mm. I am looking forward to your Makes! :-) If you like this model, feel free to check…
This is a simple mounting bracket to hold a Wyze Cam OG in a downward facing orientation. The bracket is attached by a GoPro style mounting ring system. The bracket is sized for a Wyze Cam OG: 49x49x49mm 5mm corner radius I've included 2…
This mount was designed around the Intel Realsense D455F but should be compatible with other Intel Realsense Cameras with the same mounting points (2x M4 Screws) Additional Parts Required: 4x M3x6 Heat Set Insert 4x M3x 2x M4x8 Screws
This version of the spool holder is with a downward facing rectagular hole for a humidity sensor. Drybox is designed to be placed on the right side of the enclosure or on a high shelf so you can still read the values from the humidity…
19mm ring mount for Laser and Lubetube for Revo 7. Maybe Revo 12 too, u have to try. Holes for strap included. This is slightly down facing to compensate for arrow drop.
Only support the overhanging areas. Do not support the filament hole. I used painted on supports in PrusaSlicer. Changes: October 15, 2023: Added brace to support frame per @AbelPaz_1246682. It should help with stability. October 16,…
Needed a motion sensor mount for my stairwell, so I made one. I know there are few corner mounts already available, but I did not find one with tilt. Therefore I decided to create one from the scratch. There are two variants of the model,…
VESA mount adapter that offsets the monitor 20mm below the mount. Sized for Alienware AW3418DW but should work for others.
My wife takes Flamenco dance lessons via Zoom and needs the iPad camera image to include her feet. The tablet is propped on the fireplace mantle -- now with this 3D printed stand that allows the device to be inserted with various degrees…
M10 x 1 thread for the connector, 4mm PTFE tube Make a hole on the side of the Sunlu and glue it in place. Roughen both surfaces!
Remixed for a friend to have his panel on the lower portion of the arm for height concerns
Listen to the 3D Printing Today Podcast for more about this thing: threedprintingtoday.libsyn.com This object is a press on duct for a downward fan upgrade for the 1st production run of the Raise3D N2. Chances are later versions will have…
Models to mount a ubiquiti unifi uk ultra (swiss army) ap so it points downwards. One is for wall mounting, and the other for mounting at the top of a post. The model accommodates a panel antenna mounted onto the ap. Printed in petg You…
This model is compatible with the lego system.
Summary This was a quick and dirty wedge for mounting my 28" monitors above my LG OLED. I did some math to determine that from my sitting distance (~4ft) and the height that I'm mounting at (a little over a foot above seated eye level) to…
Remix for a Dual shock 4, a SNES switch controller, and a Slim down facing switch pro controller Print Settings Printer Brand: SeeMeCNC Printer: Artemis 300 ARP Rafts: No Supports: Yes Resolution: .2 Infill: 25% Filament: Generic PLA…
This mount positions the sv08 stock filament sensor to feed it from the bottom. (e.g. Polydryer Box standing next to the printer) The sensor is mounted on the stock spool holder with the original hardware (screws & spacer). Supports are…
I find downward cooling to be VERY important in achieving high quality results. After years of trying many different approaches to adding downward cooling to Rep1 style machines I decided it was time to do it in a way that meets all of my…
Bring zen and mindfulness to your space with this beautifully detailed 3D printable yoga figurine capturing the iconic downward dog pose. This elegant STL model showcases clean geometric lines and a graceful silhouette, making it perfect…
This version is designed for downward looking speakers (for HS50M in particular).
This can be helpful in converting your Harbor Freight 2HP Dust Collector from a 1-stage to a 2-stage unit, which is what I did by way of adding a * Super Dust Deputy 4/5 . If you're limited on ceiling height like I was in my basement,…
Laser Baseplate for Revo7 crossbow side mount to mount Fenris Laser Module. You might try to fit it to a Revo12, but there is no function guarantee. Replaces one side picatinny rail. The inner holes are for insertion of 8mm M4 screw…
A desiccant box designed to sit securely inside the base of the drybox, allowing for filament to be fed through a downward-facing port. Keeps desiccant in place while allowing airflow and easy access. Base-Container_with_Hole.stl Print…
A remix of a Nerf to Picatinny rail adapter. This remix adds a slight downward angle to the rail that makes it easier to compensate for the drop of the dart. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes…
I printed extended version of honeycomb sheel holder, but I find out it reverse direction (so stored paper can be read) would be much more useful to me, so I made quick edit to original design to [blend file also contains other model for…
This is a reworking of my previous LCD controller mounts ( v01 and v02 ) for the LACK style enclosure. A special thanks to @SteffJay_64880 for requesting this design. This version is fixed to the enclosure via two screws and the…
Angled wall mounts for Samsung SWA-9000 surround speakers. New version with an added downwards angle
a parametric model of a very simple cable fork to be attached to a camping telescope pole that ends in a spike.
