Counting matching models…
I designed the fit to be perfect when printed in Prusament PETG, I haven't tried Prusament PLA or other filaments (yet). The battery type “LP-E17” is embossed on one side. On the other side the same is done in Braille.
This is a cover for canons LP-E17 batteries. It should fit batteries for EOS RP EOS M6 Mark II EOS 850D EOS 250D EOS 200D EOS M6 EOS M3 EOS 760D EOS M5 EOS 750D EOS 800D EOS 77D Please see also my GoPro 9 or 10 batterie cover .
The 3D printed mount is designed to perfectly fit the Ikea Tradfri motion sensor, ensuring a snug and secure fit. Whether you prefer a more permanent installation with screws or a flexible and removable option with magnet, this 3D printed…
About the Canon LPE17 Batteries Holder: This is a simple Gridfinity bins collection adjusted to fit very precisely the Canon cameras batteries LPE17. Variations: 1x1 (2 batteries) 1x2 (4 batteries) 1x3 (6 batteries) 1x4 ( 9 batteries)…
I designed this battery cover after the original by Canon. Prints nicely and grips really well to the battery.
Canon LP-E17 Battery Charger LC-E17E Base This base snugly fits to your canon battery charger LC-E17E, and provides clear slots for charged and dead batteries. You'll never get caught without a charged battery again! Simply store your…
This is a canon lp e17 battery holder for your batteries. It holds up to 3 batteries , is printable in an hour, and is very easy to use. But most importantly, it has a satisfying click when you insert your batteries and will keep them in…
↓↓↓ I got my hands on the iPhone 17 Pro, so I created an updated model with precise adjustments to every detail. https://www.printables.com/model/1424948-iphone17pro-softcase…
A sleeve to protect Canon LP-E17 batteries. Modifications to TheFuzz1542's model: added a small hole in the bottom. with compatible batteries that have labels not just a plastic body I got such a good seal that I had to use pliers to pull…
The STL file does not have the text on it. The gcode has (using prucaslicer).
Replacement Plastic-Clip for IKEA SKOTTORP (19/33 cm) lampshade for E12/E14/E17 Lamp-Socket Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Infill: 100% Category: Replacement Parts
Enhance the security of your valuable camera with this little 3D-printable tool. Designed to mimic a Chinese knockoff battery, it provides a discreet and effective way to prevent camera theft. With its built-in Apple AirTag integration,…
Building additional bins and trays to organize my Canon camera gear drawer. Text is in the .3mf file and not in the .stl file.
This is a simple Gridfinity 1x3 box for storing up to 6 Canon LP-E17 batteries (or any batteries that are 36mm x 16mm – I would say 34x14mm if your tolerances aren't tight) and 5 SD cards. The layout is intended to allow for simultaneous…
Another remix of the batterie-carriage ...
as i have 2 replacement batteries, it was helpful to have only one carriage for both of them
This is a soft case for the iPhone 17 Pro. The camera guard is a separate part, allowing you to switch between different designs. I’ve included the CAD data for this part, so please feel free to create your own unique camera guard! I used…
Original was designed to be printed flat, which is fine but I wanted mine to have the two opposing slopes as the original molded piece has, and no gap in the middle. Either add writing with Fusion360, or use a slicer like Orca to add…
The principle of the indicator is that the corner of the battery appears in either the charged or discharged window depending on which way round you insert the battery. I implemented this because this keying notch feature is the only part…
Casing and cap, designed for the canon camera batteries. Designed to keep the batteries clean and save from dust and dirt when inside a (camera)bag. Just print them on your standard settings. The cap has a tight fit so it won't fall off.
I am using the IKEA smarthome system and use the E1743 buttons for various automations. I was tiered of having to search for the buttons on my cluttered desktop and looked for a solution to somehow give them a fixed place. I provide all…
We got sick of the Trådfri IKEA switch sliding off sideways, and falling to the floor. After a while you get so pro at not dropping it, until it becomes dark and you fumble after the switch, and then boing boing boink, it's on the floor…
An Ikea TRADFRI on/off switch holder and wall switch cover, to prevent powering off Smart Home lights.
This model lets you put your battery operated Ikea Tradfri switches over the existing ones on the wall. It is made to fit “old style” round switch-plates (OD 46mm). There is a cavity to install a magnet to hold the switch in place. Before…
Patka na náhradní zásobník
This is an adapter plate to mount an IKEA E1743 switch to an old kopp rocker/rotary dimmer if it has been disconnected for the use of smart bulbs.
simple batter cover/holder for 2 Canon LP-E17 inspired by @Wojtek_2733 Canon LP-E6 batteries holder 2 pack. Print with the clip on the bed no supports required Update aded 3x and 4x holder
Made this easy to print holder. Optional to insert magnet from behind after printing. I did not integrate holes for screwing. But can be implemented easily.
dashcam.bike makes a good handle bar mount for your mobile phone. Alas, it needs to be thinner than 12 mm on two opposite corners, and the iPhone 17Pro isn't. I made this adapter. It's made to work with the ESR Classic Hybrid for iPhone…
I am using the IKEA smarthome system and use the E1743 buttons for various automations. I was tiered of having to search for the buttons on my cluttered desktop and looked for a solution to somehow give them a fixed place. I provide all…
Building additional bins and trays to organize my Canon camera gear drawer. Text is in the .3mf file and not in the .stl file.
This will help prevent your canon batteries from shorting out while they are out of the camera by covering the contacts. I made these because the Canon covers that come with the batteries fall off way to easy and prone to getting lost.…
This is an adapter for charging replacements for Canon LP-E17 batteries. A typical charger for quadcopter Li-ions can be used to charge the batteries. Use with caution. If Li-ions are not charged correctly or if the terminals are shorted,…
The Demi EE17 will let you take a photo when the lens cap is on and, as it's not an SLR, you might not notice until it's too late. This oversized lens cap is more easily noticeable through the viewfinder when installed, hopefully avoiding…
I created this sleeve as other designs seemed to be too tight, too loose, too large, or too fragile. It holds the battery tightly while still being easy to remove, and makes identifying charged and discharged batteries easy. While I…
I needed a mount for a bracket that holds a E17 bulb. I found this on amazon. https://www.amazon.com/gp/product/B07J4ZTYWZ/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 The project is documented here:…
This set of electrical outlet insets works great for Ikea Fryele flashlight type E1762 but also any other appliances with simple flat plug which carries a lot of weight. Many appliances and power supplies are produced cheap and their…
