Counting matching models…
All my designs are free to download, but if you like my work please consider to buy me a coffee =) Ferguson TE20 - Fully printable kit - scale 1/18 EDIT: Since the Ferguson TE20 sometimes have the headlights mounted on the sides of the…
This is very very tight, need to hammer in. And it have rib design to catch and stay in place with the OG top lid. Might need support for the one with hole. If need to print things like ABS, just masking tape around to tape over the…
Scale Guide: Yellow: 100% Blue: 150% Red: 200% Mici's thigh frame and thigh armor link: https://www.printables.com/model/729164-dummy-13-mini-me-aka-dummy-10-v03-beta/files
Originally published here: (WIP) Motorola Moto E20 xt2155 case by tato_713 - Thingiverse This was designed for the Motorola E20, but it may be compatible with the E40 as well. Some of the models are designed for rigid materials and others…
UPDATE: I have been using this pier adapter continuously for over a year and it has been outside mounted in all conditions, including Michigan winters. It works well. However, I recently bought another iOptron pier and another ZWO PE200…
This leg spreader for the RT90C tripod is designed to work in conjunction with the ZWO PE200 pier extension. It consists of two parts: the spreader and a bracket for a M10 hex bolt which prevents the bolt from spinning and allows for easy…
This adapter allows ZWO AM3, AM5, and AM5N mounts and pier extensions to be securely mounted on Innorel RT90C tripods. Using this adapter, the mount or pier won't spin on top of the plate. This adapter works well in conjunction with…
Ideal for smaller jars or bottles, these compact versions offer the same convenience and ease of use. While PETG or TPU are recommended for optimal performance, PLA can also be used. This is my favorite and recommended version of the tool…
Este adaptador foi usado como alternativa temporária às caras porcas M5 para perfis 2020 disponíveis no Brasil. Infelizmente as porcas M5 para perfis 2020 disponíveis em lojas chinesas e americanas (padrão europeu) não funcionam neste…
Box for Radxa E20C Bolt：M2.5x10 *4 Nut：M2.5 *4 Fan specifications：4010 ------cuilingji
GraviTrax - Höhensteine | Gravitrax-Erweiterung Höhe 10 / 20 / 30 mm + 5mm als Update Gedruckt wird ohne Stützen mit 0,2mm, Düse 0,4mm Bei Interesse schaut euch auch diese Version an, hier geht es höher hinauf: HAPPY.PRINT:-)
Iphone 7, 8, and SE2020 case that should be printed with solid materials like PETG or PLA . I recommend PETG as it provides just a bit of flex to the case which can help with getting it on and off. PLA will work just fine just be careful…
Baby bed mount for Eufy E20 2k indoor Baby camera. It is mounted with the wall mount and heated inserts. You need 2xM4 heated inserts and 2xM4x8mm screws to attach the wall mount depending if you want to populate only one way to attach…
Any material should be okay, but I personally suggest printing it with PETG.
Model of the housing for the OWON XDM1041 Digitial Multimeter and DGE2070 Arbitrary Waveform Generator. Useful for mocking up attachments or modifications for your devices. Files included: .stl, .step, .obj, .skp
I recently purchased the OWON DGE2070 Arbitrary Waveform Generator and the OWON XDM1041 Digital Multimeter. I wasn't sure where I was going to put them as my workbench is very small. After moving a few things around, I decided that, if I…
AI Make Now generation plus, I added the numbers with my own hands and edited the pedestal myself. Design This filigree horse is created in the spirit of ornate ornaments, emphasizing its graceful lines and grace. Appointment It is…
Case for iphone 8/se 2020/se 2022
I remixed the original model for the iPhone SE 2020 in a protective case. I also removed the ‘ribbing’ to save time and material when printing. The inner dimensions of the holder for the phone with a case are 73.25mm x 16mm. I also added…
A simple upgrade to Ekcnheb's sniper sear piece that holds the projectile a bit more, making it less prone to slipping. Print with the same XY compensations as the original model, the dimensions are identical, only the top is bigger.
(29) - Gear for Dolphin E20 active brush - part number: 9983018
A D20 with a bee for the 20. The font is Georgia
Simple case for the Flywoo Cinerace20 V2 with DJI O3 antenna. Now I can just throw it in the bag. Wall thickness is 1.6mm. Just print all three parts and glue the antenna part from the inside to the lid. I use a rubber band to keep it…
This is a remix to add an additional upper lid for Bambu Lab silica container supporting the Zigbee TZE200 sensor
Model of the rubber foot that I made to use while creating my stacking bracket for my meters. I only have PLA filament and never used TPU before. Not sure how well the dimension work for TPU, but with PLA it is a very solid fit.
Mount your JHEMCU JHE20B Buzzer to your ImpulseRC Apex 3'' quad. Has a hump to easily press the button to deactivate. Best printed in transparent TPU so that the LED can illuminate the mount
Just a small design inspired by the Decware DFR8 phase plug for the Fostex FE206En. This is not by any means the exact copy... it's just my model that i experimented on to sound quite nice Update Mid October 2021: i uploaded newer…
I bought a Supermicro SC505-203B with an A1SRI-2758F, and an E200 with a different board. Wanted to swap the boards between the cases, but the I/O plates don't align. One existed for the SC505-203B, but there wasn't one for the E200 so I…
Bassinet clip/holder for Eufy E21 and E20 baby monitor. Flat edge adapter to print on the side and increase strength.
This Box was made for the Sennheiser MKE 200 microphone and the accessoires like adapters and cords etc. It was printed with Material 4 Print PLA. The hinges of the lid may need some Support, the hinges of the box don't. For connecting…
Der Raft, auf dem struckturiertem Federstahlblech geprägt, ist die ideale Oberfläche zum Benetzen mit Geschirrspülmittel, zusätzlichem Speisen einer lang-lebigen dickwandigen Seifenblase während des Blasvorganges und sanfter Entnabelung…
Printed in PETG+, 2 walls, 20% infill. Full complete drone without battery = 140g, with 4S 850mA bat = 210g . Print two of the same model, no need to flip or mirror. Insert the original 4mm carbon fiber inserts to the frame for complete…
2.5U 19 inch rack front panel mount for Owon XDM1041 / XDM1241 / DGE2070 / DGE2035 These panel mounts require the DAP 2U MP-1 bracket. This bracket must be cut in half, with the two halves moved 2.5U apart. Print the front panel mount /…
I needed feet with a smaller profile due to the size of my work area. There are 2 versions. Either print 4 of V2, or 2 each of V3a & V3b.
Based on decware pictures and a lot of experimentation this is a release of phase plug for the new NV version Printed in PETG but PLA should work aswell
Printed in black ABS on Creality K1
Držák pro Tuya měřič hladiny (Tuya, ME201WZ, ZigBee). Existující uchycení měřiče slouží zeshora na nádobu, tedy např. IBC nádrž. Ovšem pokud řešíte problém uchycení uvnitř nádrže, například zespod na strop, proto jsem připravil tyto…
Assembly instructions and further information can be found here: https://spillerphoto.com/blogs/synthesizer/dre20-v2-0-boss-re-20-space-echo-eurorack-mounting-frame-kit-with-cv-sync
Made these cup holders that fit over the air control knobs on our Endless E2000 swim spa pool. There are two different sizes on the hot tub and swim spa sides so I created two different sizes. The knobs aren't used that often and are in…
This is a turn signal auto cancel for a TA22. This 100% works on a 1974 Toyota Celica, and should be suitable for most 70s era Toyota's that use the 84310-60062 or Toyota 20-34 indicator stalk or equivalent. This includes: KE20 KE30 KE30…
Required hardware: 2x20mm M3 caphead bolts Printed parts: 2x "ring" 1x “body left” 1x “body right” Recommended print settings: 20% adaptive cubic otherwise might be too flimsy no brim required “ring” should be printed with arch pointing…
I was printing the E200, but when I did the stock lock piece it wasn't looking like it was really going to work. One time I was trying to remove it but I broke the loop on the back half of there receiver so I designed this as an…
I make this reproduction of the base board used in the EE200x electronic engineering kits. This kit was sold in the 1970-1980s, and then later by others in different form in the 1990s. It is the base board used to put electronic…
Das Zahnrad ging kaputt. Letztes Jahr habe ich dieses durch ein gedrucktes aus PETG ersetzt. Hat ziemlich genau ein Jahr gehalten. Heute eines aus ABS eingebaut. The gear broke. Last year, I replaced it with a printed one made of PETG. It…
In the 70s and 80s Philips made electronic experimentation kits for 7-18 year olds to experiment in electronics and learn how electronics and electricity works. One of the items in the kits was an adapter bracket to use a variable or…
2 stls included. 1 has screws holes for mounting. The other version has a 1mm recessed pocket for mounting with 3M Sticky Tape. Category: Electronics
Mercedes E200 Keychain Small Very low filament cost
TPU plug for the back outlet of the Canyon Grail CF SL7. Printed in TPU 2 Walls, 15% infill
wesn box lid uses the screw from the original brass lid of chris ramsey puzzle box
Freezer handle for Bauknecht RE206Z, could fit better, but it works fine. It costs around 70USD for a new, so i made this. PETG, 0.2mm, organic supports everywhere.
simple phone ang tab stand design for my note 20 ultra phone
It may also be suitable for other Android devices.
AI Make Now generation plus, I added the numbers with my own hands and edited the pedestal myself. Design This filigree horse is created in the spirit of ornate ornaments, emphasizing its graceful lines and grace. Appointment It is…
This is a turn signal auto cancel for a TA22. This 100% works on a 1974 Toyota Celica, and should be suitable for most 70s era Toyota's that use the 84310-60062 or Toyota 20-34 indicator stalk or equivalent. This includes: KE20 KE30 KE30…
Video E200 - Ekcnheb The “E200” was invented as a toy based on the systems/mechanisms that are used inside functional Lego gun models, the advantage of 3d printing is these mechanisms can get much smaller, and much better. with 3d…
I couldn't fit the E200 stockbars on my Ender 3 V3 SE so I designed these. SUPPORTS OFF!
A replacment knob for the Zipper STE2000-IV Inverter Generator. Printed fine in PLA and ABS using supports.
This adapter allowed the connection of a standard 150mm flex hose to the output of an Easy Home LE2014 dehumidifier unit so that you can direct the dry air anywhere you need to dry out damp spots, linen cupboards etc. I've made the…
My Kyvol E20 decided to "eat" a cable, destroying the main brush gear, so it was no longer spinning. I tried a model from a friend here, but that always breaks as the top part walls aren't connected, so I reduced the main brush head size…
Freezer handle for Bauknecht RE206Z, could fit better, but it works fine. It costs around 70USD for a new, so i made this. PETG, 0.2mm, organic supports everywhere.
Replacement spacer for a ZE200 electric desk frame. This is a simple replacement spacer designed for a ZE200 electrically adjustable desk. The part sits between the metal desk frame and the wooden tabletop, where the tabletop is fixed…
Bought a couple KKM wireless charging pads, but never could align my phone. This simple "bed" for my phone aligns it perfectly. Including the .f3d file so you can customize. Please credit me if you do customize it for your phone or charger.
This models are just extentions for https://www.thingiverse.com/thing:4625988 . Category: Camera
WIP-more Improvements to come This allows The mounting of a Gear S3 Samsung Smart Watch to be mounted to the back of a Samsung Galaxy Note20 Ultra for Reverse Wireless Charging, So it won't slide around and constantly stop charging. V4:…
I designed this to wall-mount my Ikea STYRBAR remote for the TRADFRI living room lights and make it sort of match the other light switches and outlets. To mount on the wall, mark out and install two or four diagonal screws at 94mm spacing…
Update 2022-03-15 : Uploaded new model CineRace20_Frame_TPU_2022_02_14.stl with improved printability better tolerances for easier assembly stabilized conections of ducts and motor mounts After many testing flights, I'm finally convinced…
Update 2021-12-01: Uploaded slightly improved models. Also added a 19mm version for micro cameras. The 19mm variant is untested. Please, provide feedback. My CineRace has the Caddx Polar Nano. I don't know whether this mount also fits for…
This is a cover for the expansion port on CU320 (Siemens drive controller). If you have the Profibus variant, you can add the CBE20 card to add Profinet capabilities. Once the card is gone, you usually find out that the cover is long…
I found the key is a bit too long and my 5-yeaar-old daughter can easily break it. So I make it 9mm shorter and scale the heart down a bit to make the nect more robust.
Note20Ultra5g case with stand build in. Made of 2 halfs screwed together with 10mm screws m2 Version 2 Pin for the leg is out of filament 1.75 melted in place
Case for note 20 ultra 5g with stand build in top and bottom hold together with screws or 1.75 filament... melted in
A replacement part for a Superlux E205U microphone, which holds the microphone in the arm stand/holder. The part that connects to the screw on the stand might be the wrong thickness, so check before printing.
I've printed this well in PETG, 0.2mm layer height. You'll need 2x M4x4mm brass heat insert per Back Plate. 6x M3x4mm brass heat inserts per multi-plate (to fill all the holes - or only put in what you need)
This addition enables the embroidery of baseball caps with the Janome Memory Craft 300E, 350E, 400E, 500E, 550E, 9500, 9700, 10000, 10001, 11000, 11000SE in combination with the RE20b or type b frame. In the version before V2, the…
![Glue free Creality K1 Top Spacer / Raiser - Honeycomb vent [18June2023 Updated]](https://media.printables.com/media/prints/498294/images/4054428_6e5a5d2b-6758-4f12-a14f-88fcbd5b6b6b/pxl_20230604_135435086.jpg)
