Counting matching models…
I recreated some classic (JDM-)wheels. They're approximately 1:3 scale and have an diameter of around 13.5cm and a width of around 9cm. They're not a perfect copy as I drew them just after some pictures from the internet. Print them as…
i ve made this tool to separate derbi eb050 engine blocks. the tool. the tool pivots on right side crankshaft conus and is beinng pushed against the crankshaft by two M8 screws that screw into the engine block. print settings…
I bought an element E50 fire extinguisher and a lot of the 4x4 clubs require that it be “within reach of the driver” for quick access. I wanted to mount it to the lower seat but unlike my 2011 JK jeep there really wasn't anything to…
100% Ersatz für einen defekten Deckel bei einem Swiing Seilzugstart für Puch Maxi E50 mit eingelassenen M5 Muttern zum einfachen Festziehen mit Swiing Logo gedruckt in PETG
During a charge where it rained very hard, the soft material on the inner lid became soaking wet. Several hours later, the car failed to charge, likely due to moisture in the port. This cover shields the charging port from rain and snow,…
Update: GCODE files are up and running, easier to print! This is a Modular Marble Run Accessory made for the Cooler Master QUBE 500 PC Case. It includes multiple pieces that can be printed to create your own fun marble run. Every piece is…
After trying some available movement holders for my PE50 MoonSwitch , I was unhappy with how the dial didn't perfectly align with the PD1701 V5 case . Even after manually aligning the dial, screwing down the case back would cause the dial…
There are several holes on the holder. You can melt M4 threaded inserts into these holes and attach the entire holder to another plate with screws. There's also an extension for when working on the cylinder head. This is also attached…
Merged the dovetail pieces together for the 100x100 Vesa plate found here- https://www.printables.com/model/306732-vesa-plate-100x100-for-multifunction-arm-mounting Print in orientation that is shown Also made a very short full sized arm…
Phone holder to fit the front tray on the Zoe R135 ZE50. The holder incorporates a usb type C in the centre which should fit quite a few phones, the fitting is modeled on the layout in the Tesla model 3 holder. With the holder in place…
I needed a divider for the smaller and the bigger part of the fridge, that goods do not fall down. Added cutouts for better ventilation. Printed with PLA at 0.25mm Layer height and 0.4 nozzle.
The cover must be printed with support material. It is recommended to use only ASA and a layer height of approx. 0.16 mm.
Three parts to be joined with glue via the centering pin that will also serve to attach it to the Qube500 computer Tre parti da unire con la colla tramite il perno centrare che servirà pure per attaccarlo al computer Qube500
underdesk mount for topping E50, use support for mount wing. screw it. It is mounted on the lower foot, and there is free space at the top, so you can lift it slightly without having to release the mount when you need to access the…
Simple 5015 fan duct for Matrix Extruder
Qube500 - Webcam Mount The Qube500 webcam mount is dsigned to fit any M6 or ¼ UNC thread. It is extendable with 50mm segments or create your own custom length with the step file. Print support free pre-orriented models. BOM M3X5odX4mm…
Qube500 accessory set for gaming and programming. It contains a lot of holders. Every holder's name is in .stl file
Give a unique touch to your Coolermaster box with this spectacular accessories for the Qube 500 PC Case! These drawers with LEGO design will allow you to keep all your things organized, hard drives, mice, cables, or if you want, also your…
I wanted to add a TLE sensor to the rudder pedals to achieve more precision. The sensor mount slides on a profile, and the sensor itself can be moved sideways as the PCB has cutouts, allowing you to precisely position it right above the…
A snack box to attach to the Qube500 case for long gaming sessions Una scatola per i snack da attaccare al case Qube500 per sessioni lunge di gaming
Make the most modular computer case even more modular by adding your favourite bricks from Lego, Bluebrixx, etc. Unleash your creativity! The model is available in two styles. Regular and with higher airflow (recommended => files with…
I really love the Dinzl Assortment Boxes by Dinzl Ordnungstechnik and i also love Gridfinity for organizing small parts. When i looked a both, if figured that they are an almost perfect match for 8x5x6u Gridfinity bins. They are made…
Before everything I would like to say that since im not able to make this project myself (as much as i want to) I cant truly call this a finished project. With that in mind. If anyone looks at this project and thinks “damn that's cool and…
Galton Board inspired Catching game for CoolerMaster Qube500 sidepanel This is a mod for the CoolerMaster Qube500 Computer case to put a galton-board inspired catching game on the sidepanel. Printing All parts that contain connectors for…
My friend have a Puch Maxi E50 moped with a tuning kit flywheel, that didn't fit in the original cover, and also was running hot in a fully closed cover with the available spacers to make it fit. I therefore designed one on my own, with…
Can be printed without supports.
It's a torii gate for qube500, japanese style è uno porta torii per il qube500, stile giapponese
The holder can be printed from any material. No supports are necessary when the model is placed on the build plate with the foot facing down. A layer height of approx. 0.15mm is recommended.
you know that before you can buy this pc-case you have to convince your girlfriend that it is necessary. this may help;)
Print in TPU for best results
Replacement FEE501 part for SR Suntour XCM (older version - may not fit newer one)
This is my entry for the Cooler Master QUBE500 design contest. It's a (nearly) universal mounting system for cuboids. For me, desk space is always at a premium as I almost always have half-finished projects cluttered around. At first I…
QUBE500 to rack mount for 19in standard server Please be in mind this has never been structurally tested
Spare part for KARCHER extractor Printing Material - PLA, PETG Layers - 0,2mm Supports - YES Other info I recommend printing at 99%, I made the model with the dimensions I measured and it is quite tight in the hole.
Puch Maxi E50 - Main shaft gear - 349.313.1200 kick start shaft to a Puch Maxi E50 Engine Part number: 349.313.1200 Module: 1.33mm Putch Circle Diameter: 140.98 mm Pressure angle: 20deg Number of teeth: 106 Helical angle: 20…
My charger is 102 mm in diameter. Used doublesided tape to mount the charger to the body. Not sure if the side braces are needed.
15mm intake i made for my puch maxi
kick start shaft to a Puch Maxi E50 Engine Part number: 349.2.13.332.0 Module: 2.75mm Putch Circle Diameter: 82.5mm Pressure angle: 20deg Number of teeth: 30 Shaft nominal diameter: 16mm Shaft model diameter: 15.85mm The part is modelled…
A friend had his window roller break on his excavator, and asked if I could print a replacement part. Modelled it after the original (black one in the pictures) and printed in PETG to test fit. and then TPU. Original part is nylon so that…
Puch Maxi E50 - Clutch bell - 349.2.12.302.2 Clutch bell to a Puch Maxi E50 Engine art number: 349.2.12.302.2 Module: 1.33mm Putch Circle Diameter: 27.93mm Pressure angle: 20deg Number of teeth: 21 Helical angle: 20 clockwise The part is…
Puch Maxi E50 - Clutch Bell Bushing - 34921.201.111 Part number: 34921.201.111 Outer Diameter: 17mm Inner Diameter: 15mm Length: 22mm Oil Hole Diameter: 2.5mm Oil Hole Center Axes Distance From Edge: 8mm End Chamfers: 0.2x45
The cover must be printed with support material. It is recommended to use only ASA and a layer height of approx. 0.16 mm.
Spare part for KARCHER extractor Printing Material - PLA, PETG Layers - 0,2mm Supports - YES Other info I recommend printing at 99%, I made the model with the dimensions I measured and it is quite tight in the hole.
During a charge where it rained very hard, the soft material on the inner lid became soaking wet. Several hours later, the car failed to charge, likely due to moisture in the port. This cover shields the charging port from rain and snow,…
My charger is 102 mm in diameter. Used doublesided tape to mount the charger to the body. Not sure if the side braces are needed.
Replacement FEE501 part for SR Suntour XCM (older version - may not fit newer one)
A very old Givi Maxia E50 motorcycle top case. The red release button is no longer available for purchase, so I fabricated one myself (the plastic part only). It is not a professional-grade part, but it is fully functional. You can either…
Replacement retainer for the Dometic Springrollo E5002 caravan curtain. The dealer quoted €10 a piece :-D
I used tape to connect both parts (didn't want to cut the wire) also to to make it more tight put some layers of tape on one side of "back" thing, then wrap with tape the whole thing. Tape can fix everything :)
A set of some GridFinity trays to mount on your Cooler Master CUBE500 PC case. Created for the competition, so I don't have the case myself and have not been able to test fit these parts. Please report back to me if you do print and fit…
Wall mount for JBL ProTemp e500 aquarium header. Simple to print with no supports. Allows the heater to be turned left and right. The heater can not be removed from the holder without loosen the screws!
This is a USB-C / Power Delivery charger for the Flir EXX E-Series thermal cameras (E30, E30bx, E40, E40bx, E50, E50bx) and maybe E33/E63 meant to replace a missing T910814 charger. Should work with T198487, T199363, T199363ACC 3.6V 5.2Ah…
Phone holder for Renault Zoe ZE50. Three parts to print, glue the platen to the base then you will need a right angle USB cable and a couple of small screws to attach the cover. The stand is designed to preserve full access to the USB and…
Husqvarna FE501 2021 front fork tools. Made some tools when i changed fork springs in my bike. Here is a tool to unscrew the front fork top, and a tool to remove the top adjuster.
