Counting matching models…
Do you have the fantastic Tribute64, Brawler64 or Admiral BT wireless gamepads, but notice that the dongles that plug into the front of your console...sag? This is especially true with the Retro Fighters Brawler64 and made worse with a…
I created an adapter for the dewalt grinder so that it can be connected to a 35 mm hose. The adapter fits snugly.
Rigid NXT Shop Vacs already have a rotating coupler on the end with a locking attachment. I designed this to attach the Rigid shop vac to Dewalt DWE6421 and DWE6423 orbital sanders. This adapter has a feature that helps still utilize the…
I/O trim plate to for the user port area of Commodore 64 using the Ultimate 64 main board. This slides into the case before sliding the board into it. No modifications or screws needed to hold it into place. I have version 1.2 of the U64,…
Edit - I've used this for six months now and I don't have any desire to redesign stuff. It's worked out really well! My Hakko does not come out nearly as much with this solution at hand for small projects. This is a Pinecil case I…
Gridfinity bin for pinecil. Mine is Aliexpress Pine64 version. Fits one TS100 and main unit. Stackable. Created with Fusion gridfinity plugin.
i need it some caddies replacements for a couple of dell latitude E6420 and E6430ATG, and i do not wanna wait 3 weeks for parts from main land, so i recreated the original hard drives caddies for those laptops, Latitude E6420 and E6430…
I propose a remix of the Tinghiverse support https://www.thingiverse.com/thing:2416282 in which I adapted the upper part for the Pinecil Pine 64 welder. In particular, the front diameter of the support has been calibrated to contain only…
The original design for the Ultimate64 side panel by AE9RB was pretty good, however I noticed several areas that could be improved so I remixed it. The most important change was better securing the side panel in place. I added to it with…
Assembling > following things are necessary: 2x M6x60 socket head screw 2x M6x30 socket head screw 4x M6 nuts You can easily change between the 90° and 45° angle.
Allows mounting for the installation of a sandpaper disc
Do you also have a Pinecil Pine64 soldering iron? It is an excellent tool for lightness and manageability however, precisely because it is very light, when you place it on the work table using its natural feet it exposes you to the risk…
Fits original lid and hinges
adapter for using T12 tip on pinecil, with knurled grip. use it along with pinecil mosfet saver from chestwood96 for double protection https://www.printables.com/model/97073
Gehäuse für ein Pine64. Das Gehäuse kommt komplett ohne Schrauben aus, und wird einfach zusammengesteckt. Der Deckel wird per Klip gehalten und kann durch leichtes anheben der Klammen an den Rastnasen wieder geöffnet werden. Am Boden…
Slim case for the pine 64. The sides I have open for a ribbon cable. Screws are size 4. Added a full top so you don't have the connectors showing. You can choose either top or none at all. If you want to buy one http://pine64.com/ Print…
Print and thread a copper wire through the holes in the bottom. Pay attention to what is + and - of your LR44/SR44 battery. Print Settings Printer Brand: MK3 Printer: Prusa i3 Rafts: No Supports: No Resolution: 200 Infill: 38 Filament:…
Why I was doing this? the original pinecil/t100 solder tip is expensive in my country so I was searching for cheaper pinecil tip alternative and found out that a cheap $2 hakko T12 soldering tip is compatible, but I find it too long and…
Pine64 Pinecil x2 and Pinecil Tip x12 stand
Work in progress Feel free to remix! The Ultimate64 slim case is trying to be the smallest possible case for an original keyboard and Ultimate64. I put it up here for the U64 community to build upon or to use as-is. Some port holes in the…
A replacement sleeve for the Pinecil. Slice with “ Vase Mode ”/ " Spiralize outer contour " enabled.
This is a replacement right side bracket specifically for the Ultimate64 main board. Attaches to the U64 board the same as the original C64 bracket. Use short 2.5mm machine screws to attach the bracket which sits under the main board.…
Uses a twist lock like the actual connector. This should theoretically fit any DeWalt tool that uses the DWV9000 universal quick connector, but I don't have any other tools that use it to be sure. This was modeled using a DeWalt DWE6423…
This is a sanding adapter for the Dewalt DWE6411 Pad sander. It connects to a 1 1/2" shop vac hose. I included a vented and non-vented version. I was concerned it would stress the shop vac too much to pull only from the small holes in the…
Use base from the original model Fits a 6x3 magnet which can instantly put the iron into sleep mode if you fitted the hall effect mod as per https://wiki.pine64.org/wiki/Pinecil_Hall_Effect_Sensor
This is a remix of two good Ultimate 64 power socket and power button shrouds for the 64c "slimline" style case (not breadbin style case). This version takes the best of both designs and merges them into one (hopefully) universal design.…
Added the Pine64 logo to iterate's 4-tip remix of PjotrStrog's Pinecil/TS100/TS80 case . I've also included a copy of the logo cutting tool I made for cutting the case. Use 3D Builder to cut the bits in the logo cutting tool from whatever…
I couldn't find an adapter that fit my Dewalt DWE6411 sander and Ridgid HD06001 vacuum, which has a 1 7/8 inch hose, so I followed this great tutorial by Becky Stern and used Tinkercad to design one. I assume this would fit any brand…
This case for the Pine64 does not need screws, it easily snaps together after printing. Printing The attached .3mf file has the parts ordered so everything prints in one operation. With my 0.8mm nozzle it took a bit over 3h to print.…
Din Rail Mount for Pine64 Designed to use 10mm stand offs to attach board Printer: ender-7
This remix of the DeWalt DWE6423 Sander Wall Mount has been scaled up by 4% to create a slightly looser fit , allowing the sander to be stored with sanding paper attached . It’s modified to include the Skadis T-clip mounting system ,…
Simple dust cover for the soldering tip hole. For storing in dusty place or perhaps vertically in the Gridfinity bin.
These bracket hold a Dell E6430 vertically mounted to the side of my laser engraver enclosure.
I made this for my own Dell Latitude E6400. You can close the screen without it damaging the screen. It is the perfect size to fit on there, so you don't need to resize it. I was able to print it in around 4 minutes on my printer, so its…
I never had any male spade connectors, but I did have many blade fuses so took the blades from one of them and reshaped them to work. See picture 1x M3 heat insert for the holder 6X M3 6mm screws
I wanted to create an organized, compact station for my Pinecil and 120W PinePower so I could easily move all my soldering equipment around together. The station is designed to hold a tub of flux, brass wool, the 120W PinePower, the…
I am happy to present a 3 x 4 gridfinity adapter for the Pinepower 120W power supply! This file is designed to work with the 123mm x 115mm x 48mm version of the power supply. The adapter retains adequate ventilation and access to the…
Simple and nice looking case. I use Ender 3 s1 pro, transperent PETG, 0.2, 10% fill, printed angle - flat side on bed. Original model not good with high speed and 10% fill beginning of holes may be printed bad. If you want to use high…
This is a replica of the miniature E641/E642B from the "Wizards, Warriors and Warlocks" Series by Ral Partha (see http://www.miniatures-workshop.com/lostminiswiki/index.php?title=Image:Rp-e641-03.jpg&oldid=235978 ) "Great Wolf of the…
Der LeMat PINECIL Zylinder Box ist für die alle die gerne ein behalter haben möchten um alle aufätze zu bewaren um genauer 9 von den kleinen lötkolben spitzen. Es sieht wie ein Revolverlauf und dachte ich Leihe den namen von den Revolver…
TPU grip sleeve for Pine64 Pinecil. only tested with V2. should work with V1 Print out of very soft filament. my 95A Tpu was pretty hard to get on. i would recommend taking a look at TPE, those get even softer. there should be enough…
Simple model for cutting new slots
This is a simple design and has a single function, to provide a tray for the Pine64 Quartz64 Model B Version 1.3 SBC to sit in. It is intended to protect the bottom of the board to help prevent grounding or damage while in use. There are…
Doubt anyone will have use for it, but here just in case some part of it is useful. I had a Thermaltake RC3400101A MAX-3543 sitting unused after I upgraded to NVMEs and decided I wanted to put it to good use as a backup server but in NAS…
The Counterpillow model could not house a pcie long card. So here it's a redefined case to allow them
Here it is a verbatim copy of the original one created by Counterpillow (also next info is borrowed from https://wiki.pine64.org/wiki/Model_A_Acrylic_Open_Enclosure ) User:CounterPillow has created an alternate 3D-printable top plate…
Keep your Pinecil and accessories organized with this easy-to-print and assemble case! Designed for simplicity and functionality, this Pinecil case features a top/lid and bottom/base connected by a sturdy hinge. You only need four M3 25mm…
BMW e46 window regulator started skipping I have designed repair part. In order to change it, you need to remove the door covers, and i will not explain this, there are hunderds of videos on YouTube for This. Print the Gear part with…
Custom Pine64 Pinecil Storage Case – Perfect Fit for Original Foam Packaging This is a 3D printable storage case designed specifically for the Pine64 Pinecil soldering iron. It fits perfectly into the pre-cut foam insert that comes with…
Because I didn't pay attention I printed this beautiful case, and after printing I found out it was for a Pinecil V1 and I have a V2. So that's why I made a spacer so that it also fits in the box. Category: Tool Holders & Boxes
MINOR UPDATE: Shinethru LED holes for TX and RX have been shifted 1mm. Please redownload "Top_part_LEDs.stl" for the proper version. This model was designed for the USB-C debug adapter that comes with the PineTab2. I could not find any…
My Pinetime kept undoing itself so I designed this. I used 95A TPU with a layer height of 0.2mm, it took around 7 mins to print.
Hello, Sharing my project of stand/holder for floppy discs (5,25”) for Commodore64. Fits 30 discs. Letters are printed separately. If you're printing from STL file, for letters set the X-Y hole compensation to 0.12 and X-Y contour…
A case for the Tape64 V2 device for the Commodore 64, which emulates a datacorder. You don't need to print the PCB STL file, it was only used as a reference. As it's possible to assemble this PCB slightly differently, you'll need to…
Although I have not tried them, the hole versions use less filament and should be just as good if not better due to ventilation. If I had to pick one again before printing I would use the triangle version as that minimizes overhangs.…
This is a simple Skadis mount for Pine64's PineVoice device. The back wall is about 15mm thick so that most USB-C cables can fit through and then immediately be bent down or to the side, etc. Otherwise the awkward USB-C port positioning…
My Pinetime kept undoing itself so I designed this. I used 95A TPU with a layer height of 0.2mm, it took around 7 mins to print.
Custom Pine64 Pinecil Storage Case – Perfect Fit for Original Foam Packaging This is a 3D printable storage case designed specifically for the Pine64 Pinecil soldering iron. It fits perfectly into the pre-cut foam insert that comes with…
I created this because I had not seen anyone create an adapter for the DeWalt DWE6423 to a ridgid hose shopvac. I printed on a bambulab p1s with a .4 nozzle, no support was needed for me. I also printed with generic abs and the quality…
Could fit to other DeWalt random orbit sanders and vacs.
These are spacers to use on some 64c style keyboard tower mounts when using the Ultimate64 board. The U64 board does not cover some of the mounting screws for the keyboard riser, so a spacer is needed so the screw can hold down the…
A snap in adapter with m8x.75 threads for a 3.5mm panel mount audio jack to tie into the SidTap header of the Ultimate64 motherboard. 3.5mm jacks can be found on ebay or aliexpress. Thread the jack into the adapter and push the entire…
Крючок двери для микроволновой печи Samsung DE64-02355A
