Counting matching models…
Update 06.06.2024: Correction of a painting error on the model with black hood. Update 26.05.2024: Added two version for 4-color multicolor print (AMS & MMU). With white hood and with black hood. Summary This is a model of a Toyota…
Use the pliers to separate the parts and then assemble the car. The model is on a scale of 1:64. To scale a model from 1:64 to 1:43, you need to use a scaling factor of 148.8% in the slicer Printing this model with multicolor produces a…
Check the profile to download the full set. Subscribe to not miss out the next one!
Toyota Corolla AE86 Trueno, famous from Initial D Print the car and 4 wheels, might need supports for the exhaust tip Original model from sketchfab: https://skfb.ly/o8CNI Check out my print-in-place optimized version of an AE86:…
the normal jura coffe bean container is too small for our use :-) fit on Jura model E8 older model, please measure first!!!! old E8 = 130 x 132 mm .ca new E8 = 152 x 132 mm .ca add a higher version, now 45mm and 60mm for more coffee :-)…
I recreated some classic (JDM-)wheels. They're approximately 1:3 scale and have an diameter of around 13.5cm and a width of around 9cm. They're not a perfect copy as I drew them just after some pictures from the internet. Print them as…
BMW Z4 E85 Easy to print . Of course you can scale it the size you want. Easy to print for up to 90cm length, just cut it in some parts with the new slicer. I recomend a strength of about 2-3mm. Add some double-sided tape and stick it on…
This is a remix of Dendeba's AE86, it was perfect size for a keyring so I added a small loop on the model which works perfectly! Link to Denbeda's original model - https://www.thingiverse.com/thing:4914137
Schlauchhalter für Kaffevollautomat Jura E8
BMW M1. Easy to print . Of course you can scale it the size you want. Easy to print for up to 90cm length, just cut it in some parts with the new slicer. I recomend a strength of about 2-3mm. Add some double-sided tape and stick it on the…
Milchschlauchhalter für die Jura E8 holder for the milk tube of the Jura E8
Mounting plate for the glove80. This is meant as an alternative to acrylic mounting plates. This mounting plate is tested and confirmed working. However, please note that it is 3mm thick, which may be thicker than the acrylic mounting…
My Unifi Cloud Gateway Max sits on my desk. I noticed the aluminum bottom for heat dissipation gets rather hot. To help the heat dissipate and save space on my desk, created this small little vertical stand. One side of the stand I…
Ce porte canette (double) pour BMW E87-81-82 est parfait pour combler le petit vide poche inutile de nos voitures, Étant destiné a être mis dans une voiture, je conseille fortement de l'imprimer en ABS (ou tout autre matériaux résistant…
Mine got lost, so I decided to make one! Print in PETG or other heat resistant filament. BMW (E46 3 Series (not M3), E83 X3) Battery Positive Terminal Base B + - Cover Cap (61138385158) Category: Automotive
A Toyota AE86 Model available for the open Z chassis V16 Print Settings Printer Brand: Prusa Printer: Prusa Clone Rafts: Yes Supports: Yes Resolution: .15 Infill: 10% Filament: Does not matter PLA Does not matter Notes: advisable printing…
A propeller/wing protector for the inexpensive Drone Pro/E88/E99/E58 drone. This drone is a knock-off of the toy quad-copter, the “Eachine E58”. You can easily find this USD $20 drone on marketplaces such as Temu and AliExpress. Tested…
This is a 1/48 scale print-in-place high quality model of an AE86 Toyota Corolla, commonly known from the anime Initial D The wheels and axles are separate from the rest of the car, allowing it to print in one piece and let the wheels…
Would appreciate your make, a like and/or voting ;-) The wonderful Muli cycle carrier bike (https://muli-cycles.de/de/bikes/motor) has one weak point. When the bike is set out to rain/ wet weather-conditions, water tends to stay in the…
Please print with 6 wall loops, don't be shy with plastic, this is a case, it needs to be strong. Print it like on the last picture, this is the best way. Supports are very easy to remove, don't be afraid using them. I didn't found the…
I ended up re-modeling this adapter to 75mm x 75mm only and moving the VESA mount down to give clearance to the Display Port cable. Made to fit hardware and allow final mount assembling after monitor is reassembled. It is a tight and…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Toyota Corolla AE86 Wireframe Wall Art – 3D Printable Model Unleash the classic charm of the Toyota Corolla AE86 right onto your wall with our intricately designed 3D printable wireframe wall art. This model captures the iconic lines and…
This is a phone holder for a Samsung Galaxy Z Flip 5/6 to allow you to take advantage of the cover screen in the folded position and use your favorite navigation and audio apps in a 2002-2008 BMW Z4. The mount is cut away on the sides to…
Original cover was warped, so i made a new one. v3 - fixed incorrect location of the hole for screw. v2 - after printing, noticed small reinforcements are no necessery and make cover warp. after removing them everything looks ok.
Mount Glove80 on a tripod or magsafe, with optional mouse pad. Recreation of options on the store. Either cut the svg out of 3mm acrylic, or print it.
I designed this model as a drop in replacement for the OE ash tray in my BMW E89 Z4. The shape accommodates cups/bottles as well as other odds and ends. Printed upright in 0.1mm PLA with 5 perimeters and 20% rectilinear infill. Organic…
A 3D printable functional AE86 Sprinter Trueno dyno diorama build. This is intended to suit a 1:32 AE86 diecast model. Printed with PLA/PETG/TPU - Please find more details in the attached PDF (Guide-sort of :)) You can also see some build…
Toyota AE86, reduced to a small, clean object that keeps its main shape and character. Part of the Mini Cars collection — The model is simplified for a reliable print at a very small scale. Print tip: use a 0.2 mm nozzle for better…
I recently purchased an E89 Z4 and noticed quickly that there isn't an obvious place to store a drinks bottle when out and about. I knocked up this quick model which can be velcro'd into place on the bottom. October 2024 updates. Now up…
Toyota Trueno AE86 - Initial D
Key tag in the shape of a BMW Z4 E85 phase 2
Modeled after the earlier variation (if i'm not mistaken) with wider black margins. Model dimensions are approximately real-size so it's recommended to scale down for use as a keychain. Includes a top and side loop, so you will want to…
Modular mudguard system for electric longboards. Currently supports these boards: Backfire G2 (G3 possibly too, not tested) Backfire Zealot/S (front wheels only, back is complicated because of the belt drive) Also check out my other…
Took inspiration from https://www.printables.com/@Jerryie and started cutting up vehicles from https://www.thingiverse.com/thing:3553160 It is scaled to 1:72 same as https://www.printables.com/@Jerryie tanks. Has different guns you can…
I saw someone selling this for ~$10 on eBay and wanted to model it myself (to keep my $10 richer as well as post here in case anyone else had an E8). It might work on other model Jura's, I have no idea. I printed using Overture PETG with…
I recommend printing the model as it is oriented so that the locks fit properly. Print with supports. I used the standard 0.2mm layer height setting when printing, everything fits as it should. drone flight tested, everything is fine.
The support on the Jura E8 is too small for a cappuccino cup Die Auflage der Jura E8 ist zu schmal für eine Cappuccino Tasse It would be nice if you post your make. Thank you
Toyota AE86 Switch Hole Blank Cover Step file so if you need to modifie very usefull if you are gonna clean up the dashboard a bit.Enjoy like and download and leave a nice comment if you like it so i know if i can post more models.
Vent Clips for E83 BMW X3. Left and Center vents. ** Right might be different. *** will fix the gap as it might rattle for some users
use TPU or some other flexible filament
Any suggestion is welcomed! Feel free to join my Facebook group to let me know what you want: https://www.facebook.com/groups/1115757609295068 Custom display base are also available from $5! Contact me to discuss what you want! If you…
Just a simple silhouette of my friend's BMW, he needed a wall decoration in garage. Big model is about 600mm x 180 mm. Whole model have a small size and can be a keychain i think (scale it >75mm by X axis) Mounted on the wall only for…
This is to replace the latch on the dust cover for the BMW e83 headlights, clean off the old latch pieces and just slide this in. Dust cover part number 1305239123 It holds nicely even if not glued. DO NOT glue, if you do it will be…
AE86 aracının saat gösterge panelinin 1:1 ölçülü parçası. 1:1 scale piece of the clock display panel of the AE86.
Easy to replace your Washer Cover. Print left or right side cover. Paint it. Pull out the Washer System with your fingers (that's the hardes part ^^). Slide on cover. Done.
I made these to mount the router to the wall in my server closet.
Milchschlauchhalter für die Jura E8 Die elegante Lösung Mich hat es gestört das der Milchschlauch unserer Jura irgendwo in der Schublade rum liegt deshalb habe ich diese Halterung entworfen. Sie passt in den vorhandenen Spalt an der E8…
A case for 4x Canon LP-E8 rechargeable batteries. Available with flat top or camera icon inlay. Requires 4x 5x3mm magnets. Inlay is .2mm tall Print Settings Printer Brand: FlashForge Printer: Adventurer 3 Rafts: No Supports: No…
Thumb cluster back button extenders for short. I printed without infill, with small brim.
This is an adapter to allow for mounting 80mm 25mm thick fans on the rear of a super micro 846 4u case. I lost my pieces so I designed this to let me mount standard fans.
There are several mounts for the Shimano BT-E8010 battery but they seem overcomplicated to me so I came up with this. The battery stays upside down and it's kept in place by it's own shape & gravity. Print settings Material: PETG…
Changes: 11/18/2023 - added mantlet part and updated instructions 1/2/2023 - original upload Parts: The cannon support is fixes the cannon the in forward position The muzzle brake looks more accurate to real life and directly replaces the…
Mount for side protectors for honda crx ed9/ee8 Reverse engineered from (probably) orginal mounts in side mounts for front fender. It work quite well in my case Dont look at print quality of my version - i had quite wet filament at that…
LEGO Toyota AE86 Sprinter
I hope you like this model a made it using ia tools
I am low on desk space, but had a wall mounted sever rack that I am trying to fill. The Cre8Audio NiftyCASE was the right width minus the mounting hardware, so I made some. These rack ears are designed to replace the wood cheeks on the…
Pring PetG 0,2mm structural 0,4n infill 15% gyroid dimensions The plug is designed for cable glands with a diameter of 8-12mm. version for 7-14mm cable here cable gland plug m20×1,5_ver_2_cable7-14mm (plug diameter 13,7mm) od autora Očko…
A present for a friend Print Settings Printer Brand: Creality Printer: Ender-3 v2 **Rafts:** No Supports: No Category: 2D Art
Paciente8159's CNC probe This is my take on a CNC probe with some special features which are: No electronics. This probe has no special built in electronics, contact PCB nor electronic circuit (you can add one it if you want to)…
E8 Lie group or E8 lattice (go with E8 Thick) E8 root system projected onto its first three basis vectors. Below is some code I generated in Gemini. A simple game to learn the basics of E8. (some of the edu diags are sketch) Below is a…
Replacement BMW 1 series aero kit rear bumper grill. Mine went missing so made this version. This is the first attempt at making a 3d printable file and a absolute beginner. Due to my printer size I had to print this at an angle to fit…
This is a model of the M4A3E8 it's the wider chassis with a 76mm cannon turret mounted on top. The tracks and wheels are printed separately for easier printing and easier multicolor. The turret has a bushing to make it rotate smoothly and…
Remixed X Carriage to accept LME8uu bearings instead of LM8uu. Category: 3D Printer Parts
Handy little cap to keep stuff out of the battery port when transporting the battery. I printed with PETG, fits snuggly, I don't think it's suitable for flexible materials. Print settings Material: PLA/PETG/ABS/anything solid Resolution:…
The Toyota Levin AE86, famous for its performance and iconic styling, is a legendary car prized by drift and tuning enthusiasts. ⚠ When I printed the model, I only had a white that was too translucent, so the last layer wasn't enough...…
The Toyota Levin AE86, famous for its performance and iconic styling, is a legendary car prized by drift and tuning enthusiasts. Printing at 100% fill with a layer height of 0.08mm and a first layer of 0.16mm. The model size is 200 x 150…
Professional Elastic ShockMount for Neumann U87 Microphones The elastic string you see in the picture can be purchased anywhere they are selling sewing material. As well as you can spend more money to buy the typical gray one. PAY…
Clutch Stop for Bmw M 10 x 40 16 key-width Pla Full
This part helps to keep ARGB cables in place on the Nollie8 ARGB controller. This is the first version. It is not perfect, and some dimensions are estimated since I do not have this controller. I may update it in the near future. You can…
Printed on Prusa i3mk3s 15% infill PETG No supports needed Link to E badge : https://a.aliexpress.com/_EwGafNe
E88 Drone Case / E88 Drone Kabı Thhanks for supporting! You can use the model anywhere. Just add the parts from your old E88 drone and ley it fly!
Bean Extender with Jura Logo from wikipedia
Nachdem ein anderes Modell hier auf Printables nicht so recht passen wollte habe ich einen eigenen Entwurf gemacht, zusätzlich mit TPU-Dichtung. Ich habe es in Prusament PETG Galaxy Black und Tronxy TPU auf meinem Prusa-XL gedruckt,…
Wall Mount for Canon LC-E8E Charger Print Settings Printer Brand: Wanhao Printer: Wanhao Duplicator i3 Plus Rafts: No Supports: No Resolution: 0.2mm layer height Infill: 15% Filament: Technology Outlet PLA Black Notes: Printed vertical…
A simple stand that holds the battery upright. It might fit some older/newer Shimano batteries too, as long as they fit into the same bike. Open the charging port cover before inserting the battery ! If the stand feels a bit top-heavy…
Mit dem Halter kann das Tablet entweder an eine Wand oder an ein Skadis Board montiert werden. Für die Montage an einem Skadis Board müssen zwei Ikea_Skadis_Halter gedruckt werden.
This adapter replaces the factory fan mounts and is screwed in from the back with 3 screws. It allows you to mount 92mm fans in the rear, hopefully to lower the sound level of the case. Print with supports. More walls will make it more…
The TP-Link Deco BE85 Skådis Mount is an easy print in two parts. You might want to add some brims around the lower hooks, and you will need supports for the upper hooks. It is a tight fit. Try to print the SizeTest first and adjust…
Upgraded version of the previous holder: Previous holder consisted of three parts. Removing the middle part, which was supposed to hide the cable. Support adjustment. Mobile was too ejected (it hindered the gear shifting) and too high…
Replacemet dowel , not quit as good as the original from blum but better than no dowel or the usuall “so i have to get a bigger screw”. Note: use Pin_V2 the V1 was not as strong as I thought. Ersatz Spreizdübel, nicht so gut wie das…
Make sure to print in the original orientation (holes have a wedge that should be towards the top) Works great for the newer Asus RT-BE86U that has different dimensions than the prior RT-AX models. Thanks to the original creator…
The hook turned out to be strong and reliable, I have been using it for over a year. PETG, 2 hours
Used this to fix the internal air diverters in my BMW Z4 e85 dash that were broken and no longer adjustable, Replacing is pretty simple, follow youtube directions for how to slide the vents out (simple once you figure out how to release…
Using the bracket designed by DigitalSolo as a base, I snipped off the original mounting points and added some to fit in my Miata's engine bay (NA, LHD). This mounts on the side of the fuse box in the engine bay in place of the wiper…
this is a 1/35 scale M4A3E8 Sherman seat for loader and tank commander made by request for someone on facebook. marked as WIP until its been fitted to a Sherman and conformed to be accurate. Print Settings Printer: cr-10 Rafts: Yes…
This is a BMW 1 Series (E87) scale car model STL, a 3d printable file of a real civilian vehicle for display and diorama use. Get a detailed e87 1 series model for car collectors, tabletop scenes, model makers, and custom projects like…
This 2x3 Gridfinity plate can hold 1 Canon LC-E8E (official charger for Canon LP-E8 camera batteries). I built-in an “LC-E8E” label on the plate to make it clear which charger it should hold.
There are two version available. I use the snug version as I don't take my drive often, but if you do, try the loose version first.
If the plastic screen cover on your FLIR Ex series thermal camera becomes damaged or scratched, this is a DIY option for creating a replacement yourself! Repair Difficulty: Moderate This repair requires a number of steps, but with care…
The cover I had on my car was broken, I made a replacement. Printed in PETG-HF, 0.16mm with 3 wall loops, and Hilbert Curver on the base
Light shade for the Maxspect Etherial E8 aquarium LED Light Due to the large size, you will need a printer with a sizable print bed. Alternatively, you can use your slicer or the STEP file to print the shade in multiple, smaller pieces. I…
Model zawiera listę dostępnych kaw, które może zrobić ekspres Jura E8. Podane wartości na wydruku mogą nie być dokładne - zarówno orientacyjna ilość napoju w kubku może nieznacznie odbiegać od rzeczywistości jak i proporcje mogą być nieco…
Wallmount for Battery Charger of E-Bikes from Focus Jam2 / Jam2 HT / Bold2 / Sam2 with Shimano E8000 motor, using a 378wh internal or 378wh T.E.C. Pack Battery. Mountable with two screws to a wall or, using the holes on the backside with…
Irobri's P3Steel v2.01 redesigned by Paciente8159 (v2.2) This a redesign of irobri's near perfect P3Steel 3mm steel laser cut v2.01 3D printer I actually have one ( and I love it ) an these changes reflect some of the things I would like…
A VRChat nameplate attaching onto ebadge name 赛博吧唧 (E87) from zRun, with diameter of 52.56 mm The nameplate in the image has text in another color by filament changing mid print. The font used in the nameplate is Noto Sans Medium + Source…
Preventivně jsem si navrhl a vytiskl krytku, dokud mám ještě původní. Lehce se totiž může ztratit a originál Jura asi úplně levná nebude.
![[HueForge] Initial D - Levin AE86](https://media.printables.com/media/prints/919797/images/7020608_ca93004e-5e69-4d86-80e8-30e9eb002407_62879af9-5a33-453c-bdd3-2e37d923197f/initial-d-hueforge-1.png)
![[HueForge] Initial D - Levin AE86 (With frame)](https://media.printables.com/media/prints/919794/images/7020558_1fa0feb5-754a-4e86-82d9-b4b09d0b02bf_4f4ca1f8-e473-41ab-a82b-23b530c0f313/initial-d-hueforge-japan.png)
