1 / 2
eBike battery chargin stand for Shimano BT-E8010
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Holds the battery neatly upright while charging
- Rating
- 5 / 5
- Likes
- 11
- Downloads
- 47
- Makes
- 1
- Views
- 638
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Share Alike
A simple stand that holds the battery upright. It might fit some older/newer Shimano batteries too, as long as they fit into the same bike. Open the charging port cover before inserting the battery!
If the stand feels a bit top-heavy with the battery in it, I left a couple open cavities in the bottom to fill with some heavy material like cement, or sand/gravel with glue/epoxy resin or similar.
There's also a cable route in the bottom, if your electric plug is on the wrong side of the stand.
How to print?
- PLA or PETG should both work just fine.
- I designed it to be relatively simple to print, overhangs and bridging used should be trivial for modern printers.
- Have a decent number of perimeters, this will be bumped by vacuum cleaners and shoved aggressively with batteries.
- Infill doesn't probably matter much, as this thing has so much perimeter even in the bottom.