Counting matching models…
A cheap and easy fix for cracked and broken Arctis headphones, You will need, Retaining Clip plyers or E clip plyers Loctite Super glue MUST BE THIS TYPE! A soldering iron A screwdriver A 11mm or 7/16" drill bit OR Dremel and patience……
Designed a 3D model of the ATH-M40x/50x Earcups in Fusion 360 to be printed and allows you to customize your headphones. In my design, I have removed the locking mechanism for the 2.5mm cable as the cable holds very tightly even without…
Fostex T50RP headphones are very tough, but one place many fail is where the adjustable headband mounts to the ear cups using a pivot. The metal headband rods can twist themselves loose from the pivot and the cup will fall off. Left in an…
I made this because my original yoke broke in the hinge area. This model does not include the hinge mechanism. The model consists of 2 pieces: the main yoke and a clamp for the hinge. The model is of the Left side. Just mirror the yoke…
The cushions on the Bose QuietComfort headphones weren't thick enough to prevent my ears from pushing up against the internals, leading to pain after a few hours of wear. These extensions provide a little more room to prevent that…
Since my ears are in a pretty standard position I don't need the earcup hinge to be able to fold 360 degrees. I like my earcup to be pointed inwards because that's where my ears are. This snap on addition limits the range of the earcup…
Philips X2HR Headband Swivel Joint Replacement Because These Headphones Deserve to Last! The Philips Fidelio X2HR are amazing headphones—great sound, super comfortable, and built well… except for one weak point: this tiny swivel joint…
Earcups are too close for my ears, and it gets painful to listen for a long time, so I made a solution for us to use. The design is symmetric for both earcups. Took me 3 tries to find out the best way to print this, 2nd picture shows the…
So, after 5 years with these pair of headphones, they became very loose. After a bit of research, i discovered that they were held in place by friction between the metal headband and a pair of plastic sliders that were worn out. To take…
The lack of modification options for the sony headphones made me create my own. They're glue on, but with simple plastic glue they won't damage the headphones (I tested thoroughly). Printed so the support is on the part that is attached…
Replacement earcup mount for the Fostex TR-X00 headphones from Drop. Story: In 2020, a friend of mine's brother accidentally sat down on his headphones and snapped off the hinge section on his TR-X00. I was asked if I could remake the…
when i was building my Capra audio Satyr 4s i wasn't able to order the recommended earpads from capra themselves, so i ordered HD600 compatible earpads that did not include the ring you're apparently supposed to steal from the old pads.…
I took Jerkiperki's adapters to put oval earcups onto the Corsair Virtuoso headset and put the connectors from kir13y's round ear pad adapters, which seem to work much better. The original connectors from Jerkiperki's design caused the…
A part that connect earcups to the headband is prone to cracking so I decided to model a replacement. It consists of two parts (main one and small second half for earcup grip) and uses the same two screws that held original parts…
You do not have permissions to make and sell this design. Now or never. I migrated this from thingiverse – original upload date Sept 2023 I recently bought the Razer BlackShark v2 Pro 2023 and I dsicovered that the 2020 model earcups do…
Not as nice looking as the originals that shattered (on there own!) but they work great. Supports: Yes Resolution: 0.2 Infill: 100% Notes: I used supports just for the connecting end but depending on your printer / experience you might…
About: Gear-inspired multi-purpose / pencil holder with a polygonal pattern, designed for easy printing. Scale at desired size or use as-is.
“Studio-like” version needs supports. These are meant to be used as a quick way to convert the earcup back and forth between open and closed back.0 I prefer the aesthetics and sound isolation of the “Studio-like” version.
Berserk-Inspired Earcup Covers for HyperX Cloud III Wireless A pair of 5×2mm disc magnets (5mm diameter, 2mm thick) are required for assembly. Im note sure how well the singular colour stls work, i wasnt able to test them but it should be…
Spacer for loose Sennheiser Momentum 2 earcups. It is 1 mm high, but you should try different heights. My sweet spot was 0,8 mm, yours can be different. Printed with Fiberlogy FiberFlex 30D, maybe 40D would be a tiny bit better. PLA is…
Replacement for the tools that come with replacement ear cups to aid with replacement.
A spacer for loose Momentum3 earcups, makes your earcups super tight 95A TPU is recommended You will need 2 for each side, 4 in total for each side you should put one under the steel headband, another on top of it, like in the photo
less comfort less sound quality but it works Print with supports only!!
A replacement earcup bracket and cover for the Studiospares M1000/M2000 MK1s. Printing I have had mine MJF printed in PA12 but tested in FDM PLA and it also worked fine. Hardware Needed (Each) M3x10 button head M3 nut
Bought some supposedly "Made for Ultrasone Pro 900" earpads from AliBaba and of course, they weren't exactly plug and play. They fit on my AKG K181DJ phones quite perfectly, but for my Ultrasones, I needed an extra part if I wanted to…
A spacer that goes inside the earcups/pads of ATX-M50x headphones. With the some pads, ears touch the inside of the ear cup, this lifts the pad away from the body/driver of the headphones and gives some space, making them more…
After printing the original extension, I found the fit to be too loose. It could be snapped in, but would rattle around and did not provide an effective audio seal. This gasket must be printed in TPU or some other flexible material. I…
The earcup back cover on the Soundbot headphones is held on by 3 screws. For whatever reason, the mounting they screw into broke/split on mine and the cover was dangling by the battery wires. They are rather new headphones, and still work…
A spacer for loose Momentum3 earcups, makes your earcups super tight 95A TPU is recommended You will need 2 for each side, 4 in total for each side you should put one under the steel headband, another on top of it, like in the photo
Since my ears are in a pretty standard position I don't need the earcup hinge to be able to fold 360 degrees. I like my earcup to be pointed inwards because that's where my ears are. This snap on addition limits the range of the earcup…
I made this because my original yoke broke in the hinge area. This model does not include the hinge mechanism. The model consists of 2 pieces: the main yoke and a clamp for the hinge. The model is of the Left side. Just mirror the yoke…
The lack of modification options for the sony headphones made me create my own. They're glue on, but with simple plastic glue they won't damage the headphones (I tested thoroughly). Printed so the support is on the part that is attached…
Berserk-Inspired Earcup Covers for HyperX Cloud III Wireless A pair of 5×2mm disc magnets (5mm diameter, 2mm thick) are required for assembly. Im note sure how well the singular colour stls work, i wasnt able to test them but it should be…
when i was building my Capra audio Satyr 4s i wasn't able to order the recommended earpads from capra themselves, so i ordered HD600 compatible earpads that did not include the ring you're apparently supposed to steal from the old pads.…
![[TPU] Gasket for Earcup Extension on Bose QuietComfort](https://media.printables.com/media/prints/97f392cb-de77-4f09-a0bb-f69d2761da7b/images/13845428_cf9b9826-fd69-49fc-8594-e5d5c303685e_167b139b-377e-4518-8da1-ee9ca03d3ffc/img_3775.jpeg)
