42 models
Are you tired of rummaging through your shelved spiral notebooks without knowing which one is which? So was I, which is why I designed this spine label for spiral notebooks. Using less than one meter of filament, these pieces can be ready…
The Charging Station was designed as a low-cost alternative to commercially available charging stations for our school. The holder/charging station can be made for between $60 and $80 including the feet and power-strip. The center area…
After years of noticing wear and warp on my reusable Rocektbook notebooks, I decided to put my 3D printer to work to solve the issue… And voila - multi-material (TPU | PETG | TPU), customizable (colour, infill pattern + density) notebook…
As I mentioned in the first version , as much as I like digital, there comes a time when you have to go back to analog, so all my notes are in the same notebooks, I like the Leuchtturm1917 with dots instead of lines or grids, comfortable…
Template for notes to be used in an A5 Notebook with 6 ring binder. Rings are: O 19mm O 19mm O 70mm O 19mm O 19mm O This can be used to create a full “ToDo” list, but you may also use it to just create some of the points. Even just for…
This is a simple little Opening Tool e.g. to: remove phonedisplays open laptops/notebooks/tablets,… open/remove car parts remove E-cigarette-tank-glasses/atomizers or other areas of application…
As much as I like digital, there is a time when you have to go back to analog, therefore, all my notes are in the same notebooks, I like the Leuchtturm1917 with points instead of lines or grids, comfortable to write and good size. The…
I use the small (4.25"x5.5") blank craft journals from Amazon and these stencils work perfectly with them. The lines are 5mm apart, like most bullet journals. I created a version with horizontal lines and another with vertical lines. When…
This is a stencil/template you can use to turn pages in your Moleskine notebook into graph/grid paper. Perfect for math problems, pixel drawing or dungeon map making. Using this model to draw vertical lines on your page, you'll get a grid…
This is a remix of the Game Prototyping Stencil , except it's now designed to hook into and stay attached to the rings of a wire bound notebook. This prevents it from getting lost by sliding out of the binder. As in the original print,…
Parametric index card for small notebooks like Moleskine, Field Notes or Rite in the Rain The design was created in OpenSCAD and can be easily adapted to any notebook or its dimensions. The only limitation is the size of the printbed of…
This is a simple T-square I created to assist in marking out columns and horizontal lines in my notebook of choice, the Moleskine Classic Large (5"x 8.25") Notebook. The square is sized to allow the blade to span the width of a page while…
Chromebooks are used in many school districts across the United States. A keyguard can make a Chromebook more accessible for individuals with motor disabilities. Each Chromebook will have a slightly different keyboard layout. This…
This notebook cover is part of a tutorial video you can watch below. You can also use prusa slicer to add your own text to the cover (the STL itself is blank). For best printing results, use a 95 TPU with slow settings. You can also use a…
This model allows you to print your own discs for your disc-bound notebooks. You can use it to replace lost rings, restock your disc supply, personalize your journal with your favorite colors, or even create entirely new notebooks. The…
Filing cabinet for notebooks and thin books that tend to bend and fall. Printed in PLA. 0.3 layer heightto reduce time. It takes some time to print. Try to use fast settings.
i have my private, my work and my girlfriends notebook on my desk. with this stand they get good airflow and I can easily take one out or switch the dockingstation cable. works with one, but I used one int the front and one in the back.
Chromebooks are used in many school districts across the United States. A keyguard can make a Chromebook more accessible for individuals with motor disabilities. Each Chromebook will have a slightly different keyboard layout. This…
Simple notebook stand for everyday use, ligthweight and compact.
Marvel United - Octagons, New Sinister Six, and RuleBooks Storage Notes: No Supports Needed. Your Print Bed needs to be 252mm x252mm at minimum to print these. If you have a Bambu with a filament cutter, I suggest printing the cutter…
Diese Erhöhung für den Laptop ist nicht nur ergonomisch wertvoll, sie hilft auch eine Luftschicht unter dem Notebook zu generieren und diesen besser zu kühlen. Schnell und problemlos ohne Stützen etc. zu drucken.
A small base for keeping notebooks or books vertically, you can use it for having your notes close on your desktop while using little space, or to store books on a shelf. There is a small version with 3 spaces and a large version for 6…
This is a simple way to attach a small set of colored pencils to a spiral notebook. Models for both side attachment and top attachment are included. Slide the slots of the holder over the wire of the spiral, then do the same for the…
While working on the engine of my Honda CX500, I've thought it would be nice to have a more convenient way to look something up on the internet or to follow the repair manual. You need three tubes/rods with an outer diameter of 8mm to…
Notebookständer für den Schreibtisch. 2 Halter und 2 Querstreben, einfach ausdrucken und zusammenstecken. 11° Neigung
The both side parts should be printed with a filament that can resist higher temperatures. I made good experience with PETG. The pads should be printed with TPU. To mount the two parts together, two rods with a diameter of 8mm and 250mm…
I made simple clevo notebook feet; to raise the back of about 25mm; I printed in TPU Shore 92A which is of medium hardness; with the TPU the foot remains firmly fixed and does not come off; this ease of installation and removal; It could…
Mount for Notebooks / Laptops below the Desk
A simple notebook stand. In the office we have some laptops to be loaned out to staff or trainees who are usally working with a desktop. To have some order in these loan laptops, I created this simple stand. Print as many as you need plus…
My ThinkPad Yoga has only a few millimeter to the top of the desk, so it needs a lot of cooling. I created two simple elevation-blocks for it, which are connected with a 3mm bungee cord. your notebook can be up to 10mm thick. Lenovo X1…
Děti potřebovali nalinkovat několik sešitů. Napadlo mě to pořešit tisknutým pravítkem než to měřit a propíchávat kružítkem. Šlo by to asi ještě vylepšit, ale účel to splnilo a linkování sešitů je výrazně rychlejší. 1 a 2cm šířka okrajů,…
I usually have two notebooks in active use at a time normally laying flat on my desk. But since switching from the relatively bulky Leuchtturm notebooks to the svelte Campus notebooks I realized I could easily create a stand hold them…
Kleiner einfacher Laptohalter, der schnell auf und abgebaut werden kann. Small compact notebook stand, that can be quick build up and off. I printed with 3 walls and 12% infill ( type: gyorid).
A stand for the Tuxedo Sirius 16 Notebook. Might fit for other devices; clearance behind the stopper hooks on the bottom is 16mm. Length of the rests in 125mm. Width of the whole rack depends on the lengths of pipe you use. The Sirius…
Print your own notebook and put 25-50 sheets of A4 or US Letter (8.5" x 11") paper folded in half inside for a total of 50-100 usable A5 or US Half Letter (5.5" x 8.5") sheets depending on the spine you pick. Print two of any same-size…
Notebook Ständer einfach erstellbar leicht zu drucken stabil platzsparend (Achtung, mit Support drucken) Category: Office
good stand can be printed i pla and petg
Simple notebook stand for everyday use, ligthweight and compact.
This model allows you to print your own discs for your disc-bound notebooks. You can use it to replace lost rings, restock your disc supply, personalize your journal with your favorite colors, or even create entirely new notebooks. The…
Standby charger for an iPhone 15. works with my new Pixel as well. Room for two notebooks at the back, and some storage for pens etc.
Chromebooks are used in many school districts across the United States. A keyguard can make a Chromebook more accessible for individuals with motor disabilities. Each Chromebook will have a slightly different keyboard layout. This…
Standby charger for an iPhone 15. works with my new Pixel as well. Room for two notebooks at the back, and some storage for pens etc.
