Counting matching models…
These are not go over guards and replace the stock removable cage! (See Pics) They are tested in my own reef tank! They provide a cleaner look then a go over guard and the added safety of one! No more daily cleaning of quick to clog foam…
Remix of the remix by @percula I liked this design with the angled sides, because this minimizes the lightloss. The thing I changed was that I wanted the back wall, for less light spill. Also I made it 5mm taller to further reduce the…
Allows for the mounting of the large power bricks for the EcoTech Radion XR30 LED light fixtures (Meanwell GST220A36-ET AC/DC Switching Adapter). There are no straps so I wouldn't mount these hanging upside down from the underside of the…
This is a mount for Ecotech Vortech MP40 and MP10 power supplies to be mounted on the wall to ensure if a tank leaks, the electronics will be protected. Printed in PETG.
EcoTech Radion xr30 1010 Aluminum Extrusion Light Mount
Mount for the Ecotech Vortech MP10/40/60 aquarium pump controllers. Great for screwing or gluing to your tank stand to keep the controller and its wiring out of the way. Does the same thing as the factory mount but costs you pennies…
When printed, I filled the internal with supports for the front cover. Supporting the front cover seems easier than supporting the 3 cubes that hold the guard onto the wetside due to the triangular shape of the cage.
Could not find a free version of a wall mount for the Ecotech Vectra controller as it is fatter than the Vortech one, so I designed my own! I tried to make it resemble the Vortech ones already out there and not look out of place. The…
Remix of thing 39998326. Has the slide available for easy leveling on the wall. However when tightening the screws down they kept moving for me. I put a 4 pack of them together for my tank and you just have to level it and toss 2 screws…
PTEG to make it saltwater safe 25% infill
I made this after I found chunks of a clown fish scattered around the tank. No idea if the MP40 actually chopped up my clown, but now I'm pretty confident that they won't end up in there somehow. Probably not small enough to keep an…
Mount to hold two controllers Vortech/Vectra Pumps
Tamper de 51 mm. Diseñado en Fusion 360. Relleno: 20% Altura de capa: 0.02 Material: PLA
Modified original design to add more guards
Simple way to mount Ecotech MP60 power bricks to the walls of an aquarium stand. Secure for mounting on the walls, but because there is no strap this mount is not suitable to mount handing upside down from the ‘top/ceiling’ of an aquarium…
This is a rear main seal driver for all GM Ecotec 2.0/2.2/2.4 4 cylinder engines. Simple design nothing fancy. Use a small 2x4 to hammer on to avoid damaging the tool. Note there is no depth stop, so make sure the seal is driven as far as…
The sliding dovetail is made to fit into the dovetail on the RMS clamp. When printing, I put the face that presses on the glass down on the bed, so it would be smooth. I used variable layer height in Prusa Slicer to speed up the print.…
this is a logo I created based on the Ecotech marine brand logo. this is for MMU and multi color prints. Print instructions Category: Signs & Logos Print Settings Printer Brand: Prusa Printer: i3 MK3 MMU 2 Rafts: No Supports: No…
Modified mounting thread for my Cecotec Cecoraptor polisher.
Having made my other model - a dosing tube holder to go over the clamping bolt of the Ecotech RMS light mount, I felt that the exposed silver bolt looked unfinished. So I designed this little cover to screw on over the end of the bolt…
Do you hate having to use a hammer and an expensive special tool to install a front crankshaft seal (Front main seal)? Simply put the new seal on the tool and use the harmonic balancer bolt to press the seal into place. Print with a high…
Filled some of the output sections. If you plan to have your Ecotech MP40 near the bottom of the aquarium and you're worried about blowing away the sand, maybe this merged guard+redirector project can help. Haven't yet tested how useful…
Cecotec spinning bike ultraflex 25 bottle holder. Suporte de garrafa bicicleta de spinning.
soporte secador cecotec bamba Rockstar. Se puede colocar el secador con los accesorios colocados. Facil de imprimir
Cecotec Mambo tapa contactos Print Settings Printer Brand: Anet Printer: A8 Rafts: No Supports: No Resolution: 0,2 Infill: 50 Filament: FFFworld flexible blueberry Notes: Tapa para contactos de la Cecotec Mambo, para no mojarlos cuando se…
Small gap inlet for cecotec vacuum cleaner, I used it for the car and works great
I needed a new spot for my portafilter and filters so that I would not loose them in the kitchen mess. Also a place and position where they would dry. Normally I used the top of the coffee machine but then I needed to place a laptop on…
Filled some of the hexagons. If you plan to have your Ecotech MP40 near the bottom of the aquarium and you're worried about blowing away the sand, maybe this merged guard+redirector project can help. For printing tips please refer to the…
Desktop holder for Cecotec Bamba CeramicCare Airglam, maybe suitable for other similar models (but untested) Print 2 screws Supports needed for the accesories and for the holes in the base, but depends on your printer capabilites “Blank”…
Simple leg cap for the Cecotec Outsider E-Volution 8,5 Phoenix electric scooter.
I wanted to dose kalkwasser into my tank in a relatively high flow area and thought the best place to do this was right into the main drain downpipe area. So I designed this to slide over the clamp screw of a Radion RMS light bracket. It…
Alternative Cecotec Rockstar 1500 Vacuum Holder with accessories space. The model was designed using Revopoint MIRACO 3D scanner to have 3D reference. Print using PETG/ASA/ABS to require strong weight support, 4 walls, 4 top, and bottom…
A remix on fns720 design. Quoting his description: The official robot cleaning guide says you have to clean the dusty filter with tapwater. If you do so you close the pores of the filter by creating a thin, cement-like layer on the…
Cecotec Fan button
It's a cover to protect the Vailant ecoTEC plus gas boiler screen from sun, if it is installed outdoor (e.g. in a balcony, protected from rain but not from sun). You have to bent slightly the cover to put it on the plastic base prior to…
This is designed to fit the Cecotec Mambo cooking robot, it's used to cover the main jar connectors in order to prevent getting wet when washing, its splash proof, but not waterproof, you can print in PLA or in TPU for best result &…
Esquinero para la base del robot aspirador Cecotec Conga excellence 990. No se si vale para otros modelos de la misma marca. Si así fuera, por favor comenten los modelos compatibles. Esta escuadra evita movimientos de la base y los…
A quick mesh edit to fill about half the holes for surface installation
Engranaje interno de las ruedas,CECOTEC CONGA 990. Si tu conga no deja de dar vueltas y una de las ruedas está fija puede ser un problema del engranaje. Internal gear of the wheels, CECOTEC CONGA 990. If your conga won't stop spinning and…
Mango para la cazoleta de las maquinas expreso, en concreto lo hice para una Cecotec. He tenido varias cafeteras de este tipo y a todas se les acaba aflojando ese tornillo, que no puedes apretar por que viene sellado de fabrica. Este…
Soporte brazo cafetera cecotec
Lid for the water tank of the Cecotec Cremmaet Compact Steam semi-automatic espresso machine. This is a simple but functional version. It has a 1mm reduction in length to avoid friction. If it doesn't fit properly, you can try scaling it.…
Remix of the remix of the Ecotech Anenome guard to close 1/4 of the side openings. Like original part, print in PETG and 100% infill.
Original plastic ring is made of expletive-infused plastic and of poor quality. This is a replacement part designed from scratch, designed with more plastic material, and should last a lifetime. Made to fit grand katana - total destroy…
Il mio cecotec funziona molto bene ma la stazione di ricarica è piccolina ed ogni tanto viene spostata mentre passa nei bordi, non riuscendo così a tornare alla base a fine pulizia, così ho inventato questo fermo con in più la possibilità…
Endcap for Vaillant ecoTec boilers. Fits the control ports on the exhaust connector. Vaillant part #147392. Use at your own risk, check your national regulations if this part is legal to use. Schraubverschluss für Vaillant ecoTec…
Hi, here is a dual hose adapter for a ForceClima 9150 smartheating. On a portable air conditioner with an exhaust pipe, the indoor air is used to cool the hot radiator. That air after getting hot too is thrown out. The problem is that in…
springs from the join were broken, and this join adapts to the bottom
My Cecotec Conga Rockstar 1500 Ray Pure came with a furniture brush and a crevice tool, and that's it. This adapter goes between its hand-tool fitting and a standard 32 mm accessory kit, so you can use a proper soft dusting brush. Both…
This is a mount for Ecotech Vortech MP40 and MP10 power supplies to be mounted on the wall to ensure if a tank leaks, the electronics will be protected. Printed in PETG.
