Counting matching models…
I have released a completely remastered and improved version of this model with much better details! You can find the new version here: Joker (Heath Ledger) – Bust This highly detailed digital model captures the iconic Joker as portrayed…
Hey chooms! What’s going on? Everything Nova? I heard you´re David´s fan. If you wanna join Maine´s crew you should definitely print this preem logo, unlike that gonk, newbie from Wakako…ehh. Anyway here, have a drink! See you around then…
My version of the Sandevistan From Cyberpunk Edgerunners. This is based off of the one from anime not the video game model(there is differences). The model ends up being about 20inches in total, so scale it to fit your needs. All of the…
A simple cyberpunk edgerunner keychain
Here's my version of Kewi's mask/ cybergear thingy from the Edgerunners anime. Not sure how well it fits, used a 3d scan of my head, and it seems to work with it, but you may need to change it for your head. Be sure to post a make and…
Size: 25 cm in height and 16 cm in width - Max size on MK4 Printed in 0.10 mm It can be difficult to print because some of the elements are thin. I recommend good quality filament
3d model I made of the Sandevistan from Edgerunners for my David Martinez cosplay at this year's Halloween party. The design was based off one particular frame, it's not exactly prop quality, but I couldn't find any free models online, so…
I remixed Whity Case to fit the Ledger Nano S. This will fit the foam insert, cables and documentation that come with the device. You will need a 30mm m3 screws for the latches and hinges.
Model based on the following object: https://www.thingiverse.com/thing:4445926 Changes made: Cap extended to the same width as the main body. Added loop hole in the cap. Added interior body to better accommodate the device. Share your…
Case for the Ledger Nano S Plus, based off of cases I found for the X and S. I couldn't find something similar for the S Plus so I built this one for it. Note the threads are really tight initially. Have to screw the cap on and off a few…
Preamble Applications to Rebeccas Headband from the series “Cyberpunk Edgerunners” i made per the suggestion of a friend. I didn't add a headband or any type of fixture, cause headbands can vary depending on the cosplayer (to each their…
Lucy Edgerunners 1:7 scale (cca 25cm). Needed: 4pcs 5x2mm magnets glue Primer spray paint Acryl colors- color pallete for mixing colors is downloadable in files Brushes transparent spray paint sand paper 220 Figure has 3 pieces and stand…
This is a very simple rack mount for Ubiquiti EdgeRouter X SFP as well as its power brick. I did not want to deal with too much tolerances so I designed it around cable ties, which is functional but a bit crude. You will also need two M5…
Tired of the cheap Paint Edgers at the big box stores, this one uses 608 bearings (skateboard bearings) and 2 M3x5 screws to create a very ridged structure and therefore, a very clean line. Fits the Shur-Line Edger Refills. Holes are…
My version of the Rebecca's Shotgun From Cyberpunk Edgerunners. this is a combination of the gun from the game with the simplified details of the anime version. As always sanding or glue may be necessary for good tolerances. Be sure to…
Fun accessories for my regenerative compressor design! All fit a standard 22mm CPAP hose end. Only the venturi vacuum needs supports. Demonstration video:
I recently purchased a new Ubiquiti Edgerouter for my home network, and couldn't find a rack mounting solution. This is what I came up with to solve the problem. v0.1 my first attempt needed some filing to fit the front plate of the…
Hello, Welcome to my profile, full of models and miniatures :-) I have a Cyberpunk Edgerunnes keychain for you, inspired by the series of the same name. The logo is fully authentic. I used Bambulab PLA Basic as the material. It prints…
These files are designed for the most part for laser cutting. But if you are not confused by the small size, you can also print them on a 3D printer. To increase the size, you can cut these models into pieces, print them separately and…
"Cyberpunk Edgerunners" lithophane cylinder for bedside lamp. David an Lucy on the moon Inner diameter is 100mm, outer diameter 108mm, hight is 210mm. The adapter ring is only needed, when mounting the cylinder on a night lamp like mine.…
This is a wall mount holder for Ego Edger, Stringer. 0.28mm layer height 3 wall 20% + infill no brim print without support Print on PETG is recommanded for strength
You can print both sides (one front and one back) then glue them together to have the logo facing both sides. Changing colors from yellow to green is also pretty sick.
Cyberpunk: Edgerunners: Lucy
This is a 19" server mount for a Ubiquiti EdgeRouter 4. I used 8 M3*8 screws to mount the router to the mount. Use default Bambu Studio settings, if not, below were my settings. No supports, 2 wall loops, 15% infill, .2mm layer height.
Any feedback would be greatly appreciated . Preview images rendered in Blender Perfect for miniature projects, modeling, dioramas, etc. 3D scanned version Nozzle: 0.4mm Layer: 0.1-0.2mm (Recommended) Supports needed (Paint-On Supports,…
Eine Schutzhülle für den Ledger Nano S Plus A protective case for the Ledger Nano S Plus
Simple 10" rack mount for the edgerouter x.
A simple yet efficient model to safely store your Ledger Nano S. Making effective use of its size to store a Ledger Nano S.
Rack mount for 10 inch server racks I created for the EdgeRouter 4. You can use screws to secure the EdgeRouter to the rack mount, but be careful to not use screws that are too long! Otherwise, you can damage the EdgeRouters circuit…
Printed case for Ledger Nano X hardware wallet Four M3X18 bolts are needed. Lock pin works better if printed in PETG for better flex. Lock pin is then glued into the top part of the box. There are two versions of "insert_lid". One has…
Container for a Ledger Nano X Use a o-ring : https://www.mcmaster.com/1302N59/
Form: Ledger Nano S plus Material: PLA / ABS More informations: https://byzantine-vault.com/en/ BYZANTINE Vault is a reinforced case which allows to store, protect and transport electronic devices that contain your sensitive personal…
This is a replacement guard for the Manscaped Beard Hedger. It also fits the "Beatslm" knock off shaver which you can find from various sellers. It took a lot of iterations to get the dimensions just right, so I hope I save someone a…
My friends and I picked up Zombicide Green Horde and decided to print out own bushes. I stretched the height on the source file to make it match the dimensions of the ZGH bushes on Kickstarter. These were a really slow print for me, even…
Variants: USB Drive case https://www.thingiverse.com/thing:4893795 Micro SD cards case https://www.thingiverse.com/thing:4894171 Water resistant case for Ledger Nano S. Print slowly with many shells and optionally add a bit of PTFE on the…
I want to use dry concrete to make a step, and I need a Concrete Hand Edger. For my application, first, I don't need to use too much force, and second, I don't need to be very durable, so why not print one yourself? If you are not using…
The original case used the foam insert from the Ledger Nano S package. New Ledger version - Nano S Plus - doesn't come with the insert, so I made one that fits this great case. Settings for best results: TPU 1 perimeter 10% gyroid infill…
This is the EDC metal container. It has a nice rubber gasket to keep it water tight, and the price is quite reasonable ($6.50 ea at the time I'm writing this summary): https://amzn.to/3Yl8ROo All that's left is to print my stl so your…
This is a complete set of 3D hedgerows for Zombicide Green Horde. ALL 9 tiles (V side only) have had their hedgerows modelled in 3D for a more enhanced game. PLEASE NOTE: This set is ONLY for build plates that can print 250mm or larger…
Modified version of Jonatan's great Rackmount for the EdgeRouter X SFP to fit the EdgeRouter X. I added some parametric features to make the opening for the EdgeRouter whatever width you want. The ERX works well with 111 mm width The ERX…
Cyberpunk: Edgerunners: David
A simple bracket to allow you to wall mount a Unifi EdgeRouter-X while keeping access to the ports clear from obstructions. Print two and mount the ER-X such that the ports exit the bottom of the device. Note: One pair of rubber feet will…
I added threads to mount the edger on a painter's pole. It allows me to edge around the top of the wall.
Cyberpunk-Edgerunners: Rebecca
This is my first ever published model and I only did it because I couldn't find any desktop organizer that also has space for a Ledger Nano X or two. This compact organizer (111x30 mm) will hold 5 SD cards, 4 USB sticks, 4 microSD cards…
A fun way to display your crypto keys! No supports needed and is easy to print. This will work for both the Ledger Nano X and S.
This is a complete set of 3D hedgerows for Zombicide Green Horde. ALL 9 tiles (V side only) have had their hedgerows modelled in 3D for a more enhanced game. PLEASE NOTE: This set is a set that have been designed for smaller build plates.…
Cyberpunk Edgerunners keychain logo keychain No supports needed
My old ledger nano s developed a crack on one corner, near the screen, so I decided to make a printable replacement. I've tested it with the OEM parts (other than a replacement screen) and it functions normally. Some sanding may be needed…
Another variation of the tented Dactyl Manuform keyboard
Any feedback would be greatly appreciated . Perfect for miniature projects, modeling, dioramas, etc. 3D scanned version Low-poly model added Nozzle: 0.4mm Layer: 0.1-0.2mm (Recommended) Supports needed (Paint-On Supports, Tree support) No…
A container for Ledger Nano S Container User a o-ring: Oil-Resistant Buna-N O-Ring, 3.5 mm Wide, 25.2 mm ID | McMaster-Carr
A Cyberpunk 2077 / Edgerunners 3D sign for chooms with expensive taste and questionable life expectancy. I designed this model mainly for printing on a single-color printer without AMS, using a print bed of about 21 × 21 cm / 8.3 × 8.3…
Case for ledger nano-x inspired by pooley92 in this reddit post https://www.reddit.com/r/ledgerwallet/comments/h13jup/designed_and_3d_printed_a_case_for_my_ledger_nanox/?ref=share&ref_source=link Category: Containers
works best for cyberpunk tcg 40ish card deck box fits sleeves. This is printed with a snapmaker u1 at .16 layer height. NOTE: This was printed with a multi head printer ones with a single head printer might use a ton of filament with all…
Fast Is What You Do Best, Ain't It? This should work with or without the paddles on the controller. I used PLA for the controller stand (pretty) and PETG for the T-clip (tough) and printed without supports. Please check out the original…
I wanted a small box for my Ledger Nano X but not finding one, so I created mine. I hope you find it useful. NOTE The cover is not very easy to open, it is normal I did not want it to be easily released. CHANGES 06/11//2020 Add logo in…
I thought of making something like the red box in tomorrow never dies. But for a ledger wallet and in my own style ofcourse its not ultimate for portability. Its main use is organizing while the ledger is stored in a safe. if you use the…
This is a desktop stand for the Ubiquiti Edgerouter X. Print it laying down for best results. _____________________________________________________________ If you enjoy the models we have made and shared with the community, we encourage…
Printed case for Ledger Nano S hardware wallet Four M3X18 bolts are needed. Lock pin works better if printed in PETG for better flex. Lock pin is then glued into the top part of the box. There is multiple parts in lid_multipart.stl. If…
This is a custom fan grill inspired by the Edgerunners logo from Cyberpunk 2077: Edgerunners. A perfect addition to a PC case mod, cyberpunk-themed build, or just as a decorative piece. The design reflects a raw, industrial aesthetic with…
This mount can be used under a desk for a concealed, yet accessible, storage solution for the Ledger Nano X. It might be a little tight the first few times inserting and removing the Ledger Nano X from the mount. This should become easier…
The R7Makers Ledger | Modular Book Tracker & Mechanical Counter The "How & Why" Behind the Design I’ll be honest: I initially tried to print this as one solid piece, but the print time was way too long and a single failure was costing me…
It is a small storage compartiment for your Ledger device. The Cap with the hole is made for the nano X. The cap without the hole is made for the nano S. Because the nano X is bigger than the nano S, the nano S slides a bit in the case.…
.2mm layer height. Printed with rectilinear sparse infill and Hilbert curve top surface(I have found other top surface patterns are too shiny for my liking) I use brims on all my Hueforge prints and rarely have any adhesion issues. Swap…
DIN Rail mount case for Ubiquity EdgeRouter SFP
Print face down, no supports needed Note you will not be able to see the router ACT lights once installed You will need to remove the rubber feet from the edgerouter (it will fit with them o, just, but it puts a lot of strain on the…
The only support needed is on cap 1 on the flat section surrounding the threads. Print with threads down on cap 1 only.
the shorter piece is intended to be squared off, put taller piece on same mark on panel leg for perfect .25" crest the shorter piece is intended to be squared off, put taller piece on same mark on panel leg for perfect .25" crest. 1"…
simple print in any filament you like and slide the cover over the top.
Designed to make it blend in better on my white wall. For the Edgerouter X non-SFP model. Press-fit. For use with PoE! No hole for PSU connector included.
I made a TPU weed eater blade because I hated the OEM one. I think it is better in TPU because it doesn't shatter or break off as much. I hope you enjoy it!
My first remix, a remix of https://www.printables.com/model/318740-cyberpunk-edgerunners-lithophane-cylinder. Added a top cover ( I glued tinfoil to the inside which amplifies the effect) Tolerances are very high (it's going to be…
Both models are in the correct printing orientation, and are printable without support.
Can't get a replacement cap for a Black and Decker string trimmer/edger, so I modeled my own. Fits great and printed in PETG, should last a long time. Easy print with minimal supports. Will probably fit many more models, but designed for…
Support to be able to hang Ubiquiti EdgeRouter X SFP stand. Print height 0.2 also it is recommended to add custom print supports for the hooks behind.
💖 Support Me If you like this model and want to use it for commercial purposes, you can support me on Patreon and get a commercial license: https://www.patreon.com/cw/MonsieurPierre Detailed 3D figure inspired by David Martinez from…
This mount can be used under a desk for a concealed, yet accessible, storage solution for the Ledger Nano S. It might be a little tight the first few times inserting and removing the Ledger Nano S from the mount. This should become easier…
wanted a way to stand the ER-4 on it's side, so I made this stand. Print Settings Printer Brand: Creality Printer: Ender 3 Supports: Yes Category: Computer
This case is for the Ledger Flex hardware wallet. I decided to build a Version with a magnetic lid. You need: 2 x M2x25mm (i sanded down the lower 20mm of the thread a bit and glued the top 10 mm with super glue) - 2-3 x 3x1mm neodym…
I have made a simple wall mount for Milwaukee QUIK-LOK power head, Edger and Trimmer. You have to mount the Tops first and then align the bottoms before screwing them into your preferred walls. I have placed a small slit in the models so,…
Unlike Manscaped's other shavers their bead trimmer uses a sliding on/off switch with no travel lock. This design wedges around the power switch to prevent it from moving. Being a friction fit, you may need to scale up/down the model or…
Convert EGO Trimmer into an Edger May work with other trimmers with a 25 mm pole. Designed to use with this caster from home depot: Sku#: 03900349813 Props to Jim Nan: Thingiverse user: http://www.thingiverse.com/CustodialArtist/about for…
Aleph Zero is a layer-1 blockchain offering scalable, secure, and low-cost solutions with near-instant finality and ZK privacy. Ideal for Web3 apps across DeFi, gaming, and enterprise. Learn more: https://alephzero.org/
Ledger Flex Case with Airtag hidden for parametric box
This is a hard case for the recovery phrase paper that comes with Ledger devices. The two pieces sandwich together to keep the sheet from coming out. Things you'll need 4x M2.5x12 screws 4x M2.5 bolts Instructions Place the recovery…
This is a Snap on Blade Protector for the Wilkinson Sword "The Edger" so that it doesnt damage your toilet bag. It is desgined so that you can snap it on. The fit is tight, no rattling. I printed it on an H2D in ABS with 0.2mm Layer height.
UISP EdgeRouter 10X Rack mount
Aleph Zero is a layer-1 blockchain offering scalable, secure, and low-cost solutions with near-instant finality and ZK privacy. Ideal for Web3 apps across DeFi, gaming, and enterprise. Learn more: https://alephzero.org/
Increased the height by 7% to allow the threads to fit freely, also if you use a little silicone spray it works a treat
A simple stand for a Ledger Nano S, made in F360. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.12 Infill: 30 Filament: Gembird PLA Transparent Category: Tool Holders & Boxes
Custom slot loaded (rear loading) for the EdgeRouter X Switch module for use in the microRACK homelab setup. This has an additional slot for mounting a SSD or 2.5" hard drive. This is modelled based off of specification dimensions, so I…
This keychain theoretically spins if built in two separate parts. I have not tried it out yet so if any problems with the print please leave them in the comments.
Ubiquiti Edgerouter X-SFP power supply brackets for wall attachment. FreeCAD source file included for your convenience.
A bar that sits on the front edge of the desk, to provide a more comfortable form to rest palms on. It takes the edge off of the desk edge. The model fits snugly on a 1" (25mm) desktop. The model can be stuck to the desktop with two-sided…
A mount to hang an Edgerouter X (Non-SFP) on a Toughswitch PoE Pro.
