Counting matching models…
Hey chooms! What’s going on? Everything Nova? I heard you´re David´s fan. If you wanna join Maine´s crew you should definitely print this preem logo, unlike that gonk, newbie from Wakako…ehh. Anyway here, have a drink! See you around then…
My version of the Sandevistan From Cyberpunk Edgerunners. This is based off of the one from anime not the video game model(there is differences). The model ends up being about 20inches in total, so scale it to fit your needs. All of the…
A simple cyberpunk edgerunner keychain
Here's my version of Kewi's mask/ cybergear thingy from the Edgerunners anime. Not sure how well it fits, used a 3d scan of my head, and it seems to work with it, but you may need to change it for your head. Be sure to post a make and…
Size: 25 cm in height and 16 cm in width - Max size on MK4 Printed in 0.10 mm It can be difficult to print because some of the elements are thin. I recommend good quality filament
3d model I made of the Sandevistan from Edgerunners for my David Martinez cosplay at this year's Halloween party. The design was based off one particular frame, it's not exactly prop quality, but I couldn't find any free models online, so…
Preamble Applications to Rebeccas Headband from the series “Cyberpunk Edgerunners” i made per the suggestion of a friend. I didn't add a headband or any type of fixture, cause headbands can vary depending on the cosplayer (to each their…
Lucy Edgerunners 1:7 scale (cca 25cm). Needed: 4pcs 5x2mm magnets glue Primer spray paint Acryl colors- color pallete for mixing colors is downloadable in files Brushes transparent spray paint sand paper 220 Figure has 3 pieces and stand…
My version of the Rebecca's Shotgun From Cyberpunk Edgerunners. this is a combination of the gun from the game with the simplified details of the anime version. As always sanding or glue may be necessary for good tolerances. Be sure to…
Hello, Welcome to my profile, full of models and miniatures :-) I have a Cyberpunk Edgerunnes keychain for you, inspired by the series of the same name. The logo is fully authentic. I used Bambulab PLA Basic as the material. It prints…
"Cyberpunk Edgerunners" lithophane cylinder for bedside lamp. David an Lucy on the moon Inner diameter is 100mm, outer diameter 108mm, hight is 210mm. The adapter ring is only needed, when mounting the cylinder on a night lamp like mine.…
Cyberpunk: Edgerunners: Lucy
Cyberpunk: Edgerunners: David
Cyberpunk-Edgerunners: Rebecca
Cyberpunk Edgerunners keychain logo keychain No supports needed
Another variation of the tented Dactyl Manuform keyboard
A Cyberpunk 2077 / Edgerunners 3D sign for chooms with expensive taste and questionable life expectancy. I designed this model mainly for printing on a single-color printer without AMS, using a print bed of about 21 × 21 cm / 8.3 × 8.3…
Fast Is What You Do Best, Ain't It? This should work with or without the paddles on the controller. I used PLA for the controller stand (pretty) and PETG for the T-clip (tough) and printed without supports. Please check out the original…
This is a custom fan grill inspired by the Edgerunners logo from Cyberpunk 2077: Edgerunners. A perfect addition to a PC case mod, cyberpunk-themed build, or just as a decorative piece. The design reflects a raw, industrial aesthetic with…
My first remix, a remix of https://www.printables.com/model/318740-cyberpunk-edgerunners-lithophane-cylinder. Added a top cover ( I glued tinfoil to the inside which amplifies the effect) Tolerances are very high (it's going to be…
💖 Support Me If you like this model and want to use it for commercial purposes, you can support me on Patreon and get a commercial license: https://www.patreon.com/cw/MonsieurPierre Detailed 3D figure inspired by David Martinez from…
This keychain theoretically spins if built in two separate parts. I have not tried it out yet so if any problems with the print please leave them in the comments.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x160mm in size You may print at higher layer heights below the Base Thickness of 0.64mm The Max allowed Thickness is 2.4mm and the Actual…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 230x153.33mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm and the Actual…
Its a case for the pwnagotchi thats themed with rebecca from edgerunners It also includes a mount to attach to bags or other stuff! Pairable with the powerbank holder Is based on and oriented around the case made by PICO
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x160mm in size You may print at higher layer heights below the Base Thickness of 0.64mm The Max allowed Thickness is 2.4mm and the Actual…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 230x153.33mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm and the Actual…
A basic 3d-printable model of the headgear worn by Rebecca from the anime Cyberpunk Edgerunners
