Counting matching models…
This fully functional Cryptex has an easily changeable code and is modeled after the Cryptex described in the novel 'The Da Vinci Code' by Dan Brown. (Thank you Prusa team for this wonderful video of the Cryptex) Design I made this…
It is able to be printed on a standard ender 3 bed. If you decide to remix it, even on other platforms, please give credit. From my experience, this model prints very well in PLA and Bambu Lab PETG HF but has some difficulties with the…
See also 1:64 stackable sea container (works well with HotWheels) My other printables for 1:64 display I've also created more models that you can be stacked horizontally as well as vertically. Below is a preview of the display shelf you…
Any suggestion is welcomed! Feel free to join my Facebook group to let me know what you want: https://www.facebook.com/groups/1115757609295068 Custom display base are also available from $5! Contact me to discuss what you want! If you…
This is a remix of another remix I found. I made it so the full tower was cut into individual car components that easily and strongly connect with no adhesives needed. I split it into two separate versions, a base and a stacked version.…
Remix of a remix of the Hotwheels curve track piece with adjusted clip sizing. Changes were made to the legs to clean up geometry and artifacts. Sharp edges where smoothed where possible and slot openings where adjusted to fit the latest…
This is a Hot Wheels / Matchbox 1:64 scale model of a 4-post car lift for displaying different size diecast cars. This is a remix of EG3Dprinting's 1:24 scale for Hot Wheels 1:64 scale. These snap together so you don't have to worry about…
Designed for Printables Flash Contest #101, this finger skateboard I designed features real rolling wheels to give you that tactile feeling. Tried my best to design it without need for supports, but the wheels that do not contact the…
You can create am Arduino obstacle avoiding robot or a sumo robot, remote control car or even a line follower. Add more sensors depending of what you want your robot to be. Otto is super easy to make, assemble and code. You have plenty…
This model is a simple looping for connecting with Hot Wheels tracks.
The brand new McLaren MP4/4, piloted by the famous Ayrton Senna, is very good except for one crucial detail: the ratio of front to rear tyres does not match reality at all and can distract a bit. Yet all you have to do is print the tyres…
I improved this model so you can print it without supports all over the place. You only need a line down the middle, as I show in the 3mf file, for the ones without holes, or a small amount around the connectors for the ones with holes.…
I don't have enough Hot Wheels track to make a cool stunt course, and the track packs are expensive, so I made my own track system. It is slightly wider than standard Hot Wheels track. The barriers are about the same height and more…
Decided to make my own version of the M18 battery adapter. This is a bit more involved than some of the others on here. Its two pieces which can be printed without supports. It uses 5 M3 flat head screws and nuts to hold together. The two…
Standard Hotwheels connector. This one is much more comfortable when comes to detach roads.
Supports needed in the connector areas, everything else is self supporting. Nice small little ramp for inline jumps but is speed sensitive.
Disclaimer : I do not take any design credit (nor blame for the flaws) of the original model. I merely tried to repurpose and improve upon it for personal use. Optimized for Prusa Mini or similar sized bed: all the files are scaled and…
I wanted a clean looking dual connecter which was hidden once the tracks were connected. Set of connectors which allow you to connect 1, 2, 3, 4, or 6 tracks in parallel. Dual connector works great for Hot wheels monster trucks. Supports…
A display for hot wheels. The tolerances are tight so you have to heat it up a little to get the parts to fit together. Alternatively you could scale up the shelf and logo and glue it. I corrected the scale of the shelf. Sorry for the…
A Model Car Display designed for 1/64 diecast Hotwheels cars. It also works with other 1/64 car models like Matchbox. It works great and it's fast to print.
Insert hotwheels card into slot and position it so that the name of the car is visible. Hope you enjoy this model! :)
These digital 3D printable models of Clay Wheels are meant to be used to create textures in clay and polymer clay, pottery clay, cake dough, fondant, fabric, and other materials. The download contains 18 OBJ files (reversed patterns…
Still requires print supports on the part where the hot wheels track clips in.
This page is only a summary and may not have all the latest updates. The main publishing location for this model is on GitHub. Go to the GitHub page of this model for the latest updates, Blender source file, and more detailed…
My own Hot Wheels track piece, Something I felt was missing from what is sold. Works with most cars at medium speed, just don't overdo it. Connects to any Hot Wheels track with a connector, both my connectors and the Mattel ones work.…
Other polymaker cardboard spool adapters out there have the following problems: 1. They fall off 2. They slip during AMS rewinding 3. They are so large that they require you to leave the AMS lid propped open so that they don't rub on the…
After print, I decided to this model needed some improvements, and i created version 2. You can print, upload and say your comments about printed thing. I'm waiting your response :) V2 includes this improvements: - Support line for the…
Has a surprisingly large range of movement for high heels, spacing for toes are slightly increased to compensate for thicker shoe tips.
This is a recreation of the Hot Wheels retail packaging that the cars are sold in, minus the plastic blister that holds the actual car. I needed this for the display stand that I created to fit a 1:18 scale model, which can be found here:…
Update 28.11.2024: New better Beta Version with connector. Update 28.04.2024: As requested by a user, i added the first BETA version of the trackholder with connector. Due to the support, the surface is unfortunately not 100% beautiful,…
Use the pliers to separate the parts and then assemble the car. The model is on a scale of 1:64. To scale a model from 1:64 to 1:43, you need to use a scaling factor of 148.8% in the slicer Printing this model in multiple colors produces…
No necesita soportes pero se debe ubicar bien, si este modelo no cabe en tu impresora tambien esta el modelo compacto.
Remix of a hot wheels launcher that allows the launcher base to connect to standard hot wheels track. Requires two printed parts and a rubber band. Requires supports. I printed at 0.2 mm height and print came out nice.
This is my current solution for storing my 1/64 scale models. After some experimenting I came up with this design. I wanted it to be very simple (just two parts), easily printable, compact, stackable and ability to add and remove models…
Ramps for Hot wheels cars and monster trucks Print Settings Rafts: No Supports: Yes Resolution: .2 Infill: 12 Notes: Need supports for the connector area. The rest of the ramp is self supported. Category: Playsets
Update 10/24/23 Updated model now has far higher detail on the wheels I remixed the Nissan Skyline GTR model to print on its side with the wheels and axles built in. Print as oriented, no supports, if slic3r doesn't import it correctly…
Ever had one of these break? Want more of them or in different colors? These should fit perfectly in any track. Print with supports, 0.2 is fine. I usually print on my Ender 3 Pro using PrusaSlicer, if the tolerances differ on my new…
display for your 1/64 diecast cars, remixed I really liked the model by aonarcan. while slicing I noticed that the first layer could be better. I noticed the bridging that is unnecessary there. after I modified the model this problem is…
Any suggestion is welcomed! Feel free to join my Facebook group to let me know what you want: https://www.facebook.com/groups/1115757609295068 If you like my work, consider support me through Patreon:…
Various wheels from Rocket League. These are a bit outdated and do not include most of the wheels that come from crates. Getting the game files takes a lot of time and I have not done it in a while. Some export weird and may not be…
Any suggestion is welcomed! Feel free to join my Facebook group to let me know what you want: https://www.facebook.com/groups/1115757609295068 Custom display base is also available from $5! Contact me to discuss what you want! If you like…
Update 2024-01-28 Added hex display module with more stable standing base for bottom row Also added variation of it with 60x10mm label insert Added hex display module with 3mm screw holes for attaching to a board, shelf or wall 1:64…
Any suggestion is welcomed! Feel free to join my Facebook group to let me know what you want: https://www.facebook.com/groups/1115757609295068 Custom display base are also available from $5! Contact me to discuss what you want! If you…
Made a ramp for hot wheels cars to use for son's Mario kart track. We did not like the launcher that was included, which mostly shot the cars out of the track. The start gate arm is assembled with two M3 skrews, 20mm and 12mm length. No…
An adapted version of the vectored intake wheels to use in FTC with 5mm hex rev shaft. Use of m4 inserts with heat set inserts to pack them close together.
These 3D models of Lego train wheels have been optimized for 3D printing. The models included are: 55423 (Small Train Wheel) 85489a (Blind Driver) 85489b (Flanged Driver) These 3D models of Lego train wheels have been slightly modified…
Hanger that slides onto the bottom of Hot Wheels Track. Then hooks onto string or cable. Note: Print file is four (4) hangers, an individual hanger takes about 20 minutes. Testing shows about one hanger per two pieces of track for best…
🧩 Hexagonal Wall Display Pack – Automotive Collection Edition Transform your miniature collection into a true automotive gallery with this exclusive modular hexagonal display pack ! Designed for collectors who appreciate both design and…
I recreated some classic (JDM-)wheels. They're approximately 1:3 scale and have an diameter of around 13.5cm and a width of around 9cm. They're not a perfect copy as I drew them just after some pictures from the internet. Print them as…
This model will allow your kids (or, let's be honest, you) to connect any hot wheels track to any horizontal surface of a small enough thickness. Tables, book shelves, window sills… the world is now your launch pad. Includes hot wheels…
Car trailer with ramp. Connect the trailer by tilting it in an angle from above. Wheels and hinges fit for 1.2 mm nails with a snug fit - no glue needed. STL split into 3 files for easy separate slicing.
This is a simple mechanical start gate for HotWheels / Diecast 1/64 cars. Designed by PlayRobotics. This gate is really simple to print and assemble. In addition to the printed parts you will only need two M3 screws (20mm & 12mm long).…
Material: PET-G Layer high: 0.2mm Perimeters: 4 (5 for connector) Infill: 30% Cubic Holes for connectors are blind because of reliable printing. Drill them by 5-5,5mm drill. Big square is modifier - you can set bottom layers to 0, it…
A remix of a hot wheels car ramp extending it to fit 1/64 scale monster trucks! (hot wheels or monster jam). accepts two standard hot wheels track connectors to help line up monster trucks for the big jump! print oriented with the Xes on…
Initially, I designed this wheel for on-road drifting. I created it for the Traxxas E-Revo 1/16 (VXL), but it may also fit other RC cars with a 12mm hex wheel carrier. The front wheels are slightly narrower to provide enough steering…
Changelog: 5.7.2021 Added a “short” 160mm version for easier printing on the Prusa Mini.
I recreated some classic (JDM-)wheels. They're approximately 1:3 scale and have an diameter of around 13.5cm and a width of around 9cm. They're not a perfect copy as I drew them just after some pictures from the internet. Print them as…
Holds 12 cars Can friction fit multiple shelfs together The dimensions of the rectangles are 3.2"x1"x1.4" (LxHxW) Screw hole is .2in diameter, will fit max. #10 screw
CAD based ramp for Hot Wheels tracks
I have made a garage for small cars! Especially made for Hot Wheels -sized cars, the garage is available in two sizes. The small one for most of the cars, and the tall one for taller cars! It can be stacked upwards, so it can be displayed…
These are pieces to connect your new Snap-Track Hotwheels sets to older “e-track”. Snap-track is directional, so there are adapters for each end. Designed to be printed on a FDM printer. Has not been tested on SLA printers.
Hot Wheels starting gate in which the base has been modified to support being mounted to a Hot Wheels track connector. This allows it to be mounted on something like a desk clamp (as seen in pictures).
Elegant 3D printable Clay Wheels ✨They're perfect for adding beautiful Aztec-inspired textures to all kinds of materials like clay, polymer clay, pottery, cake dough, fondant, fabric, and more! 3 patterns in STL print-in-place handle Size…
These wheel chocks will stop your Hot Wheels / Matchbox 1:64 cars from rolling around on unlevel surfaces. They work on the front wheels, back wheels or both. Very quick print! HW Chocks-ChockA is easier to print and comes off the build…
update 15-02-2024: added stl file without the support enforcers and original Freecad file 180degrees curve compatible with the orange Hotwheels track. to connect it to the track, 2 standard hotwheels connectors are needed. there is no…
Any suggestion is welcomed! Feel free to join my Facebook group to let me know what you want: https://www.facebook.com/groups/1115757609295068 If you like my work, consider support me through Patreon:…
Any suggestion is welcomed! Feel free to join my Facebook group to let me know what you want: https://www.facebook.com/groups/1115757609295068 Custom display base is also available from $5! Contact me to discuss what you want! If you like…
After a long journey through Chief Delphi, Thingiverse, and all sorts of weird vendors, trying to find an easy to print, highly functional Vectored Intake Wheels for FRC robots... I have given up and decided to design my own . . . A bit…
This was designed for my son Norm and it works awesome! connects to Hot Wheels track with adapter. Print it on its side!!! Any plastic will do. Layer height is up to you. Have fun and share any pics or stories please. My son has spent…
Background I set out to make this remix because all the other track clamps I printed and used would break at the same spot along the layer lines on the sides of the square pieces that interface with the tracks (see picture below). This…
My Steelseries Apex keyboard recently lost one of its rear feet during a move, and Steelseries support doesn't sell or provide replacements. This is a model for a replacement foot that roughly matches the stock foot – it's not an exact…
movable wheels, fits right on the hot wheels track
CAD based Hot Wheels Y-junction
Carvana has a really unique concept to purchase a car. They have tall towers that they call car vending machines to store and display all of their cars. The Carvana towers are easily recognizable and look so cool seeing the cars displayed…
Spool Adapter for Polymaker PolyTerra and PolyLite Filament. Designed for Bambu Lab AMS.
I've had a few hotwheels for a while now that I had nowhere to put, so I came up with this nifty holder. Just print it out and stick on a few pieces of double-sided tape and you are happy to go.
Update 10/24/23 Model is updated with easier to print wheel with more detail, and better tolerances on the axles. I remixed the model to be printable on the side, with built in wheels and an axle Print as oriented, no support, .2mm layer…
A new version is available! Here it is! This is a 1:10 scale drift wheel with a 12mm hex. Print the wheel and tire separately. The wheel and tire fit together with two notches. add a thin bead of Super Glue in between the wheel and tire…
Please see my video on how to print and assemble: https://youtu.be/_eJe7B8Vqws Parts list for one CFS unit (4 spools) 4× standard POM wheels 4x M3x20 screws 4x M3xL3OD4.5 heatset inserts • A complete set of four tensioners even fits on…
Basic track connector for hot wheels track
Digital 3D printable models of handles for our texture rollers Data ready for easy 3D printing in STL: Thin texture wheel handle 2 wheels handle 3 wheels or middle-sized roller handle 2 handles and insets for large texture rollers 3D…
This is a Hot Wheels / Matchbox 1:43 scale model of a 4-post car lift for displaying different size diecast cars. These snap together so you don't have to worry about extra hardware or glue. I've added added a wheel chock near the front…
What you need: 608 bearing, 22mm diameter, 7mm thick, 8mm center. Get one from that dusty fidget spinner you have laying around...also skateboard bearings superglue WARNING: over time the frame will create shiny patches on your…
Wanted to create a way to make wheel sets for HO railway cars. Two parts wheels and axle, easiest to print separately. I recommend doing 4 axles at the same time, works best with my Prusa. To get them glued in all the right angles, print…
This Track pieces comes in a split model To be compatible to most printer sizes.
Update: 08.09.2026: New stand with Matchbox logo :) Logo is now having more back so the whole stand is more stable. Also I have made the cutouts from the scratch and fixed some issues with vertices . If you would like to support me - you…
Remixed Bridge: Track 2mm wider,Tunnel Fits track,Built in connectors
This remix takes the original model, cleans up its stlness, removes a small part of the back, adds a kickstand and most importantly - the wheels now rotate. You will need: black filament grey filament colour of your choice filament 2x…
This 3D-printed filament holder is designed for larger filament spools weighing up to 3 kg. It features a robust and stable design, using 608 bearings for smooth and efficient spool rotation during printing. Its simple construction makes…
The wheels are for WORX Landroid PLUS WR148E. Diameter 220mm. The Weigths from the old wheels can be used (have to be used) Improves spinnig wheel problem. I print the Cover and Hubs in ASA (can be printet also in PETG or PLA) The Tire is…
Garage for Hot Wheels in Hexagon shape. 1pc and 3pc, so you can arrange in whatever shape you wil..-
I recreated some classic (JDM-)wheels. They're approximately 1:3 scale and have an diameter of around 13.5cm and a width of around 9cm. They're not a perfect copy as I drew them just after some pictures from the internet. Print them as…
Dodge Charger 1969. Assembly required. Can be printed separately Use the pliers to separate the parts and then assemble the car. The model is on a scale of 1:64. To scale a model from 1:64 to 1:43, you need to use a scaling factor of…
1/64 Hotwheels trailer is compatible with Matchbox and other diecast brands. Scale to desired size and print!
A 2 and 3 stories lift for 1:64 models, HotWheels. The base platform can be used with the 2 and 3 storry sides. The platforms just slot in into the sides, glue can be used for extra stability.
Wheels for the Traxxass TRX-4M Defender. All fit the original rubber and have the same offset as stock by default. Alternate versions with +X push the wheel out by Xmm, the wheel sits further out. -X brings the wheel closer to the body by…
Off road bogger and street bash style wheels, all in one tire/rim combo like Hotwheels 1$ car wheels. The outer diameter is standard hot wheels offroad tire sizes (13mm and 16mm) for .8mm axle (hot wheels dimension). The street bashers…
