14 models
EggTimer Tracker Box Build Video: I use the 0.28 spacers for the LCD and Audio Board mounting Spacer 0.44-Buz is designed to fit by the buzzer on the board Recommend using 7 slot picatinny rail 4-40 hardware is used for mounting all the…
A sled to mount an Eggfinder Tx in a 54mm Nose cone coupler/shoulder with a screw thread. Also included the female threaded housing to be epoxied into the 54mm coupler. Thread is M45 x 4.5 2 x M2.5 3 or 4mm long brass heat set inserts…
Really liked the model by IPL, but didn't need the aftermarket antenna, didn't need the audio mounting points / audio jack, and wanted to use a different switch design. I used these toggle switches from Amazon: Amazon.com: Nilight 12pcs…
Mount for EggFinder Mini Tracker
Case To Mount your EggFinder tracker in
Built around 4-40 Hardware 8x - 4-40 1/2" Phillips Pan Head bolts (for mounting LCD) (Use included printable spacers to properly stand teh board off the lid) 12x - 4-40 3/32" Hex nuts 8x - 4-40 3/4" Phillips Pan Head bolts (For Mounting…
Hardware Needed for assembly: 8x M3 Heatset inserts ( 94459A130 ) 2x M3x8 Socket Cap Screws ( 91502A103 ) 4x M3x6 Nylon Screws ( 92492A116 ) 6x M3x16 Socket Cap Screws ( 95263A158 ) 1x Screw Switch (…
Eggtimer Eggfinder LCD Eggtimer LCD GPS SS23E04 Double Toggle Switch 8 Pins 12mm Push Button Switch 18650 Series Battery Holder Multi-Cell 2S Type-C To 8.4V Step-Up Boost LiPo Polymer Li-Ion Charger 2S 20A 7.4V 8.4V 18650 Lithium Battery…
This is a case for the EggFinder basic (non-LCD) receiver. It has a space (and openings) for a 9v Lipo rechargeable battery similar to the Okcell, or could be used with a standard 9v battery. There is a "cover" plate for the bluetooth…
Model is a high powered rocket electronics bay sled to hold a Eggfinder MiniTX GPS Tracking unit in a 3.0in rocket. Image shows model built using PETG with no supports and 0.2mm layer height. #4 fasteners are required to attached MiniTX…
Nosecone Mount and Coupler for the PML X-Calibur to fit the Eggfinder GPS unit & 7.4V LIon Batt. Requires: - 2.5mm x 4mm Heat Insert Nuts x8 - M2.5 x 7mm Cap Screws x6 - M2.5 x 5mm Cap Screws x2 - M6 Eye Bolt and M6 Lock-Nut I printed…
I created this tether mount after a high-impulse flight destroyed one of my Mini TXes at liftoff by inertially pulling the board off the Kevlar tether I had looped through the PCB holes. Clearly, that was not the way to fly and I needed…
Hardware Needed for assembly: 8x M3 Heatset inserts ( 94459A130 ) 2x M3x8 Socket Cap Screws ( 91502A103 ) 4x M3x6 Nylon Screws ( 92492A116 ) 6x M3x16 Socket Cap Screws ( 95263A158 ) 1x Screw Switch (…
Eggtimer Eggfinder LCD Eggtimer LCD GPS SS23E04 Double Toggle Switch 8 Pins 12mm Push Button Switch 18650 Series Battery Holder Multi-Cell 2S Type-C To 8.4V Step-Up Boost LiPo Polymer Li-Ion Charger 2S 20A 7.4V 8.4V 18650 Lithium Battery…
