353 models
This improved file has an integrated thread for a standard PC4-M10 PTFE tube push connector. This allows for you to print your own threaded part for the best push connector option rather than having to break out the soldering iron for a…
Print approx. €0.23–€0.29 excl. taxPreliminary estimate for one variant
The stock MMU3 Selector tends to break when tightening the clamp that holds the FINDA in place. My first one broke, as it seems they made the hole larger than the previous model. I ended up remodeling a couple features on it. First, I…
Print approx. €1.58–€1.93 excl. taxPreliminary estimate for PETGSource material: PET
Have you every wanted to snag a bowl from the dishwasher for a big bowl of cereal in the morning, but was unsure if the dishes in the dishwasher were clean? Well, now you can know for certain! Just use this Dishwasher Status Selector…
A refined selector, with smoother filament paths and a robust blade holder. Someone raised the point that when you run out of filament, the return pathway is still quite problematic. However, as you will only need that return pathway when…
In case you don't want to file a detent pin round for your super safety switch, here is a working solution. I printed it on a resin printer with 0.05mm resolution. Feel free to share…
Models for the upper and lower Frequency selector Knobs on the Airbus A320 RMP. Knobs are both in two parts to allow printing with top face upwards to achieve best visible finish. Printed in matte grey PLA, 100% infill. Knobs are a push…
Improved MMU2 selector with rectangular slot for magnet found in Prusa MK3S/MMU2S kit parts. This is a modification of the E2 version of MMU2 selector mod by emanuvele, inspired by same modification of the previsous V9 version done by…
This is a remix of the MMU2S Selector FINDA version R2 (improved blade holder mentioned in release notes for Firmware 3.9.0) with a slot for a 6x2x10 magnet for improved FINDA reliability. (The magnet used is the smaller of the magnets…
Update: 5 Jun 19. I had a problem with occasional jams during loading with blunt tips hitting the blade. I've modified the selector and blade cover a bit further to prevent this from happening. I've also made the blade "sockets" much…
Dimensionally accurate two-part design that can be printed and used without any painting or post processing. Main switch body printed in matte grey PLA, though can be printed in any colour and painted Marker line printed in white PLA or…
Selector front plate with pc4 m10 coupling for MMU3
Based on the R2 Prusa selector released March 3 2020. Slot for 6x10x2 mm magnet. Windows for viewing/calibrating steel ball and PINDA. UPDATE APRIL 4 2020: Added a hole so you can push the magnet out. Print instructions PETG 0.2 layers 4…
P90 and FS2000 parts Printing: All parts should be printed solid. PLA will not work for anything other than the selector switch. Nylon is the recommended material. You need to use a strong impact resistant material. Stay away from carbon…
selector front plate for prusa mmu2 and mmu2s with direct pc4m10 coupling. Meaning no hole that the filament has to pass trough. Design is done in openSCAD. File is include. If you want to modify it you need to add…
After creating a replica from scratch for HPA there were some holes and unneeded things. So I fired up my CAD. I was in need of covers for the selector cap, charging handle and buffer tube. In addition the original dust cover is triped…
A quick remix of the stock MMU2 Selector Plate and the tapered thread PTFE coupler from https://www.thingiverse.com/thing:1993384 I mashed these parts together as I was getting a bit tired of the stock festo coupling cutting into my PTFE…
These are needle selectors that work with flatbed knitting machines that have a needle gauge of 4.5mm. 1x1 and a flat edge 1x2 and 2x1 1x3 and 3x1 1x4 and 4x1 2x2 and 3x3 2x3 and 3x2 These models were generated from a parametric CAD model…
Printed in PLA 15% infill 0.15 layer height
Enhanced MMU2S Selector. I Add various function. FINDA STATUS LED by Dajosco SIDE Canal for ball status by teookie Add Magnet for ball positon by teookie Add dual Cutter by me Precision front PTFE holder by ? (deleted) Use Original Prusa…
I remixed the selector front plate to accept a PC4-M10 coupler.
Major issue that comes up frequently in later model Australian Ford territory and falcons is the degradation of the bushing or grommet around the transmission selector arm. These will fall apart at the most inconvenient time possible -…
This accessory replaces the standard single objective nut with a three positions rotating turret. This way you can "zoom in" or "zoom out" selecting a different magnification objective. Bill of Materials One set of printed parts, printed…
Saving plastic, adding holes Thanks to the author https://www.thingiverse.com/thing:2672463 Inserts: https://www.thingiverse.com/thing:2422188 https://www.thingiverse.com/thing:2434938 Print instructions Category: Organization
I have modified the front plate so that a PC4_M6 coupler can be mounted. The original version was R3
You will need front PTFE holder for this to work properly. I made the inlet for the selector much larger and smooth to deal with filament that just didn't want to behave. Works great. No more selector jams. Print instructions Print layer…
This is a Magnet improvement to the MMU2S (R2) Selector PINDA part. The only modification, I made, was to place a 6x1 mm round super magnet under the steel ball and filament path. This magnet will keep the steel ball down when the…
Rain water collector diverter allows you to choose whether you want to send water to the tank or to the sewer Print in White PETG for 80 mm tube (2 screews 4x40 to fix handle) Optimized print profiles for Bambu Lab printers available…
Hello, i designed a simple pin organizer for the pins of locks. Enjoy :)
I have modified the front plate so that a PC4_M6 coupler can be mounted.
In combination with Retro Arms CNC Split Gearbox, the standard V2 selector plate was not reaching full-auto switch on the Leviathan V2 ETU (non-optical version), so I made this one with a wider tab that activates the two firing-mode…
This is an enhanced version of the airsoft mp5 selector cam, compatible with both V2 (A, SD and Navy variants) and V3 gearbox versions (K variants) of the mp5. Being a gunsmith for my team, I have come across the need for this part…
Electric guitar pickup selector switch knob designed to fit my Ibanez RG370DX. A little on the small side and very tight on the selector switch, may want to increase the scale 10% or so. I just heated up the selector switch metal prong…
Filament PETG-ABS Infill 20% supports are necessary
Just a simple fire selector for M4/M16 airsofts :) Redesigned for better mounting. Use a M2(9,4 mm) self-tapping screw please. Other versions: https://www.thingiverse.com/thing:2890070 https://www.thingiverse.com/thing:2889913…
The MSU Selector has been designed from scratch and it's the result of many weeks of design iterations, printing and testing. Other than the sleek design, it has many other benefits: It lowers the selector failure rate to less than 5% (0%…
These are some minor changes to parts of the Prusa MMU 2.0. Like many I had issues with keeping the cutter blade in place. To fix that, I added three pegs to the selector body and three matching holes in the blade holder. While I was…
Selector plate for gearbox V2 M4 AR (cut for selector ring is moved 1mm or 0,5 more back) or original position 3D printing settings Print with supports (I use Tree organic) On smooth plate (you can turn Texturet PEI to smooth side) All…
A Flap Selector Switch handle for Flight Simulation. Use with APEM 639H/2 or 637H/2 Switch. Assemble both parts with some short filament segments and superglue. See also my Gear Switch for Flight Simulation
Just minor modifications and deepened blade slot like the latest prusa design.
Mod of the TradRack Binky selector to have both a gate switch and an encoder
In case the original part breaks. Should be a drop in replacement. You might need some post processing (sandpaper) If you have issues, please contact me.
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker Number pointer is a friction fit. Simply align and press it…
Blades fell out of my MMU3 selector, this should keep them in place.
This is an updated version of the "E2 SM" selector which should have the correct R2 blade holder depth Print the same as the standard part, you'll also need the updated official blade "clamp" part. Update log: Mar 16, 2020: No change,…
A Replacement part for the Raven EU 18 by Nuprol. This part is able to be 3D printed as it moves a metal part which is responsible for the change in firing mode. Instructions This does require support and I recommend printing it upside…
Very simple dust cover for Airsoft only M4 unusued fire selector holes.
Kaypart Alloy Steel Bushing for Mercedes Vito Viano 639 Manual Gearbox Repair
A replace for the pickup selector switch, suitable for Epiphone and Gibson. Printed with Creality Ender 3.
Store up to six Leatherman bits (12 tools) in a Zippo lighter case. Idea of Laura Kampf: https://www.youtube.com/watch?v=zIqTdPbxGBY Print Settings Printer: Fabrikator Mini II Rafts: Yes Supports: Yes Resolution: 0.2 mm Infill: 20 %…
This is the modified version of the MMU3 selector finda with chamfered filament intake that makes it easy for the filament to slide in. Sometimes, espesially when the filament tip is very flat it hits to the side of the hole on the…
UPDATE 10/13/2019 - Added revised selector with pinhole to push out magnet for re-use in another print if needed. Also widened the bore entry points some more. I wanted all the features of the large bore remix (and all the features it was…
My PowerBlock weight insert “Selector Pin” broke. The part looked pretty basic so i decided to model it and print it. I re-used all of the old hardware from the broken insert. It came with some magnets and some torx bolts and nuts. Works…
Hello, This is a replacement dryer knob I made for my GE DBSR453EB0WW dryer. It has a couple of features that make it a little harder to print, like the small rise on the bottom which requires support material, but it matches my dryer…
A Y splitter that is melded to the MMU3 front plate, which allows for direct filament use (disabling the MMU3 in the Prusa menus) OR using the MMU3 for multi-material. I created this because, factoring in the material storage, buffers,…
This is a model I made for my Suzuki VX800 motorcycle. The original has to tabs that hold it onto the petcock itself with a screw to secure it in place. The tabs broke off, and an OEM replacement, if you can find one, is to expensive. I…
Just a simple fire selector for M4/M16 airsofts :) Redesigned for better mounting. Use a M2(9,4 mm) self-tapping screw please. Other versions: https://www.thingiverse.com/thing:2889913 https://www.thingiverse.com/thing:2890069 Cusotm…
Selector front plate for Prusa MMU2S/3. You can attach PC4-M5 coupling without M5 threaded insert. So, you use this model if you want to change the color of MMU2S/3.
A simple upgrade that requires just two parts. (see options see below ) Option 1. Remove M5 brass insert from original and then insert into new part. Option 2. Use of alternative does not require you to remove brass insert from original…
## New changes in Version2 (this version) VS version1 (Version 1 https://www.printables.com/model/971423-ercf-v2-selector-mod-for-larger-28mm-17g-servo * In version1 servo arm cannot touch the filament block top hat to release brake. The…
Introduction : This is a knob for the selector switch of the CZ Scorpion Evo 3 by ASG. I made it to replace one of the sides of the selector (in my case the right side) to prevent the end of the knob to pinch my finger while using my…
Lego Monorail Motor with the direction selector switch that was included in the original motor This uses a “MS-23C01” sliding switch on a custom designed pcb, that also allows you to power the motor from a small lipo battery inside the…
version2 is now released https://www.printables.com/model/1006480-ercf-v2-selector-mod-for-larger-28mm-17g-servo-ver # ERCF V2 selector mod for larger 28mm (17g) servo ## What: for ERCF V2 enraged rabbit multimaterial system.…
Switch cover of my Ibanez S470 guitar. Also suitable for equivalent guitars.
Fits DF505X11W Might fit other models, to aid this I've added a screenshot of the dimensions of the shaft. I printed in PETG with a few extra perimeters and added a couple of drops of paint into the recess to clearly mark the currently…
My little dogs push the buttons and upset my jeep. This cover stops that. It’s a tough print, and may need some tweaking because the “clips” need to be small enough to click in, but are also fragile. I would print vertically because it…
Just a simple fire selector for M4/M16 airsofts :) Redesigned for better mounting. Use a M2(9,4 mm) self-tapping screw please. Other versions: https://www.thingiverse.com/thing:2890070 https://www.thingiverse.com/thing:2890069 Cusotm…
This was made based on the basic electronics that come on the Squire Affinity series Telecaster. Nicer potentiometers might not fit in this plate. I've added the .f3d and .step files to allow you to modify the plate to fit your…
MMU2s Selector Front Plate for PC4-M6 Coupler
David's wonderful selector is now screwless. Additionally, the position of the window has been lowered by about 3 mm to center the filament numbers in the window. The ring inside the window can be printed from David's indicator_ring.stl .…
Airsoft AUG 3 position fire selector / safety . Tested with JG Styer AUG A1 100% infill 0.2 mm layer height support required
A very accurate model of the classic Gibson-style “poker chip” pickup selector switch indicator/cover. Originally designed for SLA printing, this also works with FDM printers. I'd recommend 100% solid layers, as it's not very thick and…
Just a simple fire selector for M4/M16 airsofts :) Redesigned for better mounting. Use a M2(9,4 mm) self-tapping screw please. Other versions: https://www.thingiverse.com/thing:2890070 https://www.thingiverse.com/thing:2889913 Cusotm…
Replacement knob for the fuel selector on many 2-Stroke Seadoo models. There are 2 models, one is a shorter version without the need for supports and a longer version modeled closer to factory. Both work fine, just personal preference.…
If you have a 9 mm bulky knitting machine and lack needle pushers, then you need these. I designed these to be simple and quick to print. So far I have the following combinations: 1 x 1 2 x 2 and 3 x 3 2 x 1 and 1 x 2 3 x 1 and 3 x 1 4 x…
After coming across Seth's design, I really liked it - but I wanted to use it for something else rather than a dishwasher. So, I took the text wheel and removed the text to allow myself to print other things upon it. Print instructions…
Refined mmu3 selector with stronger pinda clamping section. print in the same orientation as the original with all Prusa recommended values. Use whatever filament you feel comfortable with.
Edit 2023.05.25: Added a dial without text for cross-function uses. If you use dry boxes or anything where you can't see the side of the spool you may have been in the same situation as me. “What's in the box?” No.. not that movie. What…
A ring to fix the joystick, sub selector on your Nikon Z6/7. The button can still be pressed, but the ring prevents the focus field from being accidentally moved. It sits firmly in place, but can be easily removed with your fingernail. To…
This is a set of workbench-mounted adapters that allows the easy selection of the hose which is connected to my shop vacuum. There are two adapters: one that connects to a 2 1/2" hose and another that connects to a 1 1/2" hose. The intake…
Ariston oven mode selector knob. Better to print with the hollow side on the table ============================== Замена сломанной ручки выбора режимов для духового шкафа Ariston. Печатать лучше полой стороной на стол. Print Settings…
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/9GZXXO23uD5 Category: 3D Printing
Selectora con 3 alas para Artillery Hornet
Some of these gear selectors are heavy to operate, this solves that problem! Requires m3 bolt and nut to close, prints as a single part uses print in place hinge. Confirmed to be able to fit a Shimano Nexus type shifter.
The MOD for the ERCF SturdyBunny MOD replaces the ever-problematic micro -Servo with a regular Servo. The design has some similarities to Mr Goodman's Large Servo PushMOD but differs in my design not requiring the Servo to remain…
Printed from PETG: Extruder #1 - Body - orange Extruder #2 - Numbers - black Extruder #3 - Windows - clear Enjoy!
Conexión frontal del selector de MMU3 Versión R4 modificada para usar clips en vez de racords y así evitar romper el PTFE que va al extrusor. Las medidas se han obtenido del modelo de drodfro:…
Print flat, then install upside down. The part is thicker around the gear selector, but there isn't room for that reinforcement on the top, so it has to be on the inside. Use a semiflexible filament for best results, I used PLA+.
Temporary-permanent solution for those that ruined the brass insert included in the upgrade or for those building the mmu2s upgrade piecewise and are having a hard time finding the a thin brass insert.
I've been using the great selector mod that vintagepc created for a while now. It's been working out very well for me, however occasionally the filament would shoot out the opened area just past the metal ball (pro tip - the metal ball…
I have designed a handbrake that requires no hard modification to your gear selector. Just print out the left or right base plate and clamp it under the selector. Im still working on improvements but it is a working concept for the people…
This is a replacement selector valve compatible with Intex sand filters / pumps for outdoor swimming pools. I printed this part for a friend when the handle of the selector valve broke off (original in picture). The original part was…
I remixed two parts of the selector for MMU3 UltiMulti by David ( @David_84304 ). SELECTOR_FRONT_PLATE_B5_PC4M5.stl The original design required a heat insert, which had to be purchased separately. To eliminate this requirement, I…
Selectors and Blanking Plates for the Airsoft ASG Scorpion Evo in the style of magpul selectors
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker Number pointer is a friction fit. Simply align and press it…
In order to replace the relatively weak MG90S servo, I chose the DS-S006M 12g digital metal gear servo, which has the same size but stronger performance and better durability. The Servo_Mount is the same as the MG90S servo, but the…
This is a slightly slimmed version of original selector motor support for ERCF 1.1. It consist a little bit more place for a pancake NEMA17 motor up to 23mm (there is a 24,3mm on a model, but more than 23mm of a motor might be difficult…
I was Playing Half-life and was inspired to make a valve knob for my printer, gold piece needs supports upside-down.
We designed and tested several knob type controls but kept coming back to the wheel, so we made some refinements. There is a concave face on an even larger and deeper button than the previous design. Suggest printing in PETG. If you have…
Replacement for the selector plate of the Jing Jong G36C G608 airsoft.
I've always wanted a rose capped pickup knob on my Telecasters. So, I finally made one. This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/4gH7RAbOEwv Category: Music
