Counting matching models…
Winterization cap for pump and electrolyser to spend the winter in better conditions. Resolution: 0.2 Filling : 20% of the water Support : none Material : PETG…
This is a simple holder for contacts for electrolysis. You cut the side out of a soda can, sand off the paint, then put the can sides into the holder. then attach the top to the top of a bottle/container and put wires through connecting…
This cap has six holes so that you can insert electrodes for in-situ electrolysis and lines for CO2 sparging, in addition to the inflow/outflow lines. There are two different designs with the holes in different orientations. A special…
This is a an electrolysis pen developed for use with galvanic electrolysis machines using off the shelf F shank needles and a female pin insert for D sub style computer connectors and held together with M3 screws. It can be run from a 9v…
Concept This holder clips on to a standard 40mm specimen sample pot and keeps a fine wire in suspension. The wire itself (typically 0.3mm to 0.8mm diameter, usually 0.3mm 316L stainless steel) is held in place by a croc clip on the tab…
Have you ever wanted to create hydrogen and oxygen from plain water? Well, download this model and start making it right away! (disclamer: hydrogen is very flammable, especially if it mixes with oxygen. do this experiment outside for your…
A near-future industrial site featuring rows of electrolyser containers, spherical hydrogen tanks, and transformers in a broad, low layout. Inspired by 2040s sustainable energy infrastructure, this model captures the clean, unlettered…
Electrolyser WARNING :- ELECTROLYSIS CAN PRODUCE TOXIC GAS AND CORROSIVE CHEMICALS SO BEFORE DOING ANYTHING THAT MIGHT HARM YOU OR YOUR FAMILY RESEARCH PROPERLY AND FULLY UNDERSTAND WHAT YOU ARE GETTING YOURSELF INTO BEFORE ATTEMPTING TO…
This is a model from an idea hatched a dma.space in October 2026. It is a retractable galvanic electrolysis probe needle holder that solves the problem of the delicate probe filament becoming easily bent and damaged. Assembly: Screw the…
This is a box made to be compatible across the different versions of Hair Boopers, and to nest inside Gridfinity boxes. I like using this 5x4 model ( https://www.printables.com/model/894202-modern-gridfinity-case ), but any box will do.…
This kit is an attempt to make a neater version of the model i found here: https://www.hairtell.com/forum/t/my-diy-electrolysis-setup/56726 I originally intended to include a 12V battery pack but I didn't have the proper charger so I…
Concept This holder clips on to a standard 40mm specimen sample pot and keeps a fine wire in suspension. The wire itself (typically 0.3mm to 0.8mm diameter, usually 0.3mm 316L stainless steel) is held in place by a croc clip on the tab…
