Counting matching models…
Its a Remix from AKinferno remix :) you find the original on Thingi ID 5383489. The original cames from WheatlyLaboratories Axolotl and McGybeer's "Articulated Lizard" and the head comes from “Schlossbauer” Axolotl. We painted it in…
This is a remix of Cat Stretch by billyd. I used Meshmixer to reduce the mesh and create a voronoi pattern. I scaled it to 125% and printed it like that. If you would like to donate, please do it to the author of the original model as he…
Honeycomb Wall parts I designed, I also created my own Screw Wall that is much stronger and many more available tool holders (over 300) check it out! Thanks for looking. Screw Wall now has over 50 Club subscribers! I also have created…
*** Free to print, NOT to sell *** For Commercial Rights, you must join my Club. Dec 15 - Informed there may still be an issue with the links sticking. I will correct this this weekend. Until then, just Split the model into parts or…
[Update] ---2025/01/21--- Ultra size cat released!! It is about twice as long as Extra size and looks like a dragon, so looong! This is a super long version of “Flexi Holding Cat” which was previously released. Since there were many…
This is a variant on Dummy 13's chest and abdomen parts, giving it a more feminine build that is aesthetically consistent with the original design. These parts are a drop-in replacement for the ones included in the main Dummy 13 model.…
👇 See sizing instructions below 👇 Original Tingivese Description This is a remix on ohmg's tape measure holder . Thank you for providing the STEP file! My wife's tape measure had a rivet holding on the metal end, so I had to make a notch…
…Please be sure to hit like & post a make, I'd love to see your prints! EDIT: Finally! STEP file has been added!! Sorry it took so long guys, enjoy!! Add some class to your Voron with this awesome canopy / top hat! If you have a smaller…
“v2” version has no label area in case you want to save even more filament. Otherwise, print the “v3” versions. The original Bambu Lab spool holder works well but takes a lot of filament and is missing a few nice features, such as being…
A Christmas Update | V4 is Here! 🎄 12/09/2024 This update marks the final version of my iPhone Standby Dock Remix, and I couldn’t be prouder to share it with you all. Creating this has been a monumental task—I went through and completely…
UPDATE Sep 24 2023 Before you download and print this, I made a new version with VENT Holes, check it out > DK Riser And another version of a low profile riser >> DK Riser Low Profile A Remix of Daniel's Bambu Labs Carbon X1 Top Glass…
Always wanted a simple tool for joining filament pieces together - when the spool runs low or to join DIY multi color filaments ( Easy Multi Color Filament ). I remixed LoboCNC's fine Filament Splicing Jig : Added compliant hinge to make…
Update: V2 is much smaller! V1, named ‘Bigfoot’ by those commenting here, had the majority of its development dedicated to troubleshooting code, with the CAD being a first attempt. V2, which I'm calling ‘Mini-ish’, inverts the joysticks…
Subscribe Now! A very good model from Velrock. Yet another remix pose Time-lapse print video : https://youtu.be/xsk3FDa-Cx8 Baby Yoda : https://www.thingiverse.com/make:872409 Live print in progress. Subscribe to find out more support…
This is a fully functional 3D Printed RC Semitruck model. The main attraction includes an automatic hitching system plus power & command delivery to the trailer. Future trailers such as side dumps, lowboys, belly dumps and cargo trailers…
This model is a remix of the original “Catch-All Trays / Desk organizer” model. It is fully compatible with this remixing model and it can also be stacked on top of the original remixed model. The containers are in sizes 5x5 / 5x10 / 5x15…
This is a remix of DaVinci2000's Crocodile bag clip https://www.printables.com/model/243848-crocodile-bag-clip If you like this model, please give a like to the original. I did not create this. I only added a face. It works very well. I…
This remix of the original Banana Katana introduces significant improvements for enhanced functionality and stability. The original Banana Katana model features a banana that unfolds into a long sword. In this remix, the model has been…
I've re-made the revolver based on original EDUNBR3D's design implementing some changes for easier printing. I sliced in OrcaSlicer from STEP files using tree/organic supports. You can see my support parameters on included pictures.…
This is a remix of Crafty Sven's excellent articulated Guardian. Just like the original, it prints without supports. When I first printed the original model, I was honestly surprised that the head isn't designed to move - because most of…
UPDATE 9/8/22: Better tolerances on all assembly pieces Back button made thicker to avoid transparency with lighter color filaments Main body without money clip version added This popular wallet model is now available to assemble after…
This wiper has been superseded by a new revision with several improvements: Improved dimensions for precise fit A right side version Slim profile for unobstructed LED status bar visibility Improved silicone pad position allows wiping on…
I have combined the best features (in my opinion) of three previous remixes of the Bambu Lab spool. I started with the refactored “Bambu X1 Re-Usable Spool” as a base, then added the best features of the “Improved Bambu Lab Reusable Spool…
Remixed version with thicker hinges and less overhangs.
Meet your new little steamed friend! This adorable bao bun dumpling is designed with a soft, rounded shape and a charming expression that gives it plenty of personality despite its simple design. Whether it's sitting on your desk, shelf,…
Subscribe Now! Time-lapse print video : https://youtu.be/F1pj7ACaZ70 Remix to support free and printed. Subscribe to find out more support free 4K Time-lapse video: Subscribe Now!…
Simple remix that adds ledges half way up the riser so the glass will slide in on top of for easy ventilation when printing PLA. Add LED lighting or stick cheap under cabinet lights to the bottom of the AMS for a simple lighting solution.…
This is my remix of the fantastic Hogwarts model by falloutboy2015 . Unfortunately my .4 nozzle couldn't print the original, so I tried some of the other remixes. They were no good. The one I tried failed spectacularly because of slicing…
I created double sided version of Kyle Cup V5 as it suits me much better :). Remix of design: MandicReally https://thangs.com/MandicReally/Kyle-Cup-V5--NEW-DESIGN--Chad-Chalice--Stimulant-Stein--Monster-Energy-Drink-Can-Cup-17751…
A major capacity upgrade for your egg storage: This is a Double-Track Remix of the popular egg dispenser. Based on the concept of a single gravity-feed egg trough, this design doubles the number of tracks, allowing you to store and…
i fixed the ears. the original stl ears holes i were messed up. and i smoothed it. https://skfb.ly/69POn Print Settings Printer: mp select mini Rafts: Yes Supports: Yes Infill: 30% Notes: i printed with kitty on its back. raft and…
Great model from Revennant. Remixed to no base and almost support free. IronThrone_SupportFree_icz.stl (Need infill) IronThrone_SupportFree_NoInfill_icz.stl (No infill with sloped seat. Printed in timelapse) Subscribe to find out more…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** Thanks to the awesome Delta P duct design by @teookie,…
To support me the most, please download from MakerWorld Link: https://makerworld.com/en/models/170277#profileId-186972 Hate having to use a plyers to remove the bit? Well no longer. This remix has relief cuts on all the corners meaning…
Robux Coin 2 sideded remix
Updated Threaded Rod Model to remove extra shell which was causing slicing issues for some. New “v2” version will work with the original Nut but I added a v2 Nut just in case there is confusion. This is a remix of a remix of a remix. The…
Update V2: I completely rebuilt the Duplo connector. I changed three things of the original "Minimalist Duplo - Brio, IKEA, Wooden Train adapter" with Tinkercad in order to fit my needs: I reduced the inside height of the Duplo connector…
I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No Check my other Simon's Cat designs https://www.printables.com/model/1239416-simons-cat-you-are-purrfect-keychain…
Instructions by Printium 3D For Iron Man, you should be printing the outer armor in Iron Red and Gold filament. I choose to use PLA instead of the recommended PETG because I got more model detail from the PLA. I did use galaxy black PETG…
This is a remix of the awesome Ratcheting Capo by LoboCNC . Print it in place, no supports necessary. It works (surprisingly) really well. I've printed a few and I keep them in all my guitar bags because I often forget my main metal one…
***UPDATE*** I've had a couple of suggestions come in (thank you @Roman_1037762!) that I'd like to implement over the next couple of days. The first of which is a clockwise flow for folks south of the Equator. Or maybe you just have a…
I printed in PLA Infill: 15% Layer Height: 0.20mm Brim: Yes Supports: Yes, organic Check another version: https://www.printables.com/model/1068118-cubone-pokemon-skull-lowpoly-keychain-remix Check my latest design for Christmas…
My Ultimate Cereal Container Filament Drybox has been out in the wild for a few months, and after some great feedback from all of you and continued use in my setup, I've decided to make a few official changes. The biggest change is a…
Print details: 0.4mm nozzle 0.2mm resolution Printed with supports for the tusks and teeth Filament: Amazon Basics Black PLA
A word of caution This project is currently unmaintained, as ESPHome keeps introducing new breaking changes with every monthly update that require continuous rework, testing and debugging. This has been an issue from the very first…
This is a smaller, 4-leaf redesign of emmett's totally amazing Preassembled Iris Box ( http://www.thingiverse.com/thing:1811143 ). After studying emmett's design carefully and with some advice from emmett himself, I managed to design a…
The source marked this model as adult content.
Updated Feb 4, 2025. Repaired the model, had a couple geometry issues. I wanted a bigger version of this organizer that had more room to store my USB card readers as they didn't fit on the original organizer. Also I prefer printing…
Remix of "Wave Puzzle 7" by ThinkingPegasis. ( https://www.thingiverse.com/thing:3739933 ) Changes and/or improvements over the original: Thicker pieces Pre-flipped a few of the tiles to not give the solver a hint based on the surface…
Compatibility Use v1.0 or v1.0A1M receiver: As a stand-alone unit in conjunction with another stand-alone spool roller/stand/holder OR with Donor Spool Roller v0.3 or newer OR with Donor Spool Spinner v0.5 or newer v0.5 and later receiver…
This model is based on Rakoon Design @RakoonDesign 's TIE fighter, but all the parts have been retouched by me except for “ TF_wing_in_x2.stl ” and “ TF_Radiator_x2.stl. ” The latter of which was borrowed from Enrique Juárez…
I printed in PLA Infill: 15% Layer Height: 0.10mm Supports: Yes, organic If you like my work consider Buy me a coffee 😊
-EN- _ *** 2022/10/11 *** FINAL VERSION 1.0 *** *** 2022/10/12 - The missing skin for the neck was added. *** *** 2022/11/09 - Fixed too loose "ears" and removed unnecessary extra parts. *** Do you like Chappie? His little brother is…
I was asked to make a cat phone holder for a friend, Lucky BS3 cat design are better than anything I could make. If you don't have a printer, no probably. you can buy it here https://www.ebay.ca/itm/123864860853 Category: Mobile Phone
This is my remix of ItsOnMyMind's design for a working bear trap keychain. His original model is from Thingivere if you want to check it out. https://www.thingiverse.com/thing:3769837 This remix is optomized for two elastics, any elastics…
I have a huge skulls collection - so found this amazing skull by Vlad Aldea & made some changes to make it look more “human skull” & scaled to 1:1 with human skull. Printed in Dual color (Black & Red) - (28 hours)
I am space limited due to a shelf above the Centauri and I plan to use it primarily for ABS / ASA prints so I used Prusa Slicer to chop off the vents but retained the angled shelf to add in led light strips. The Centauri Carbon is dark…
Yosemite Sam, a cartoon character in the Looney Tunes and Merrie Melodies series of short films produced by Warner Bros. He is commonly depicted as an extremely aggressive, gunslinging outlaw or cowboy with a hair-trigger temper and an…
From the well received GREATEST Towel Hook V2 now an Remixed Version that can be hang on a door without using tape or screw I really liked the original model but i didn't want to attach it with tape or screw, so i remixed it to be hang on…
This is a bit bigger than the original (see picture 2). I replaced the 3 small drawers with 2 additional big ones. They also got a 3*5 gridfinityframe inside - it will fit gridfinity bins up to 6u, for example. Used the flat covers by…
I added holes to allow fixing this Zipper Slider Jig with clamp . Clamp can be used on the sides, front or back
I love the original ButtPals design by dgoalva but I like to twist my bread clip to put it on and off and the original design was to thick to give me that freedom. So I printed them at 2 mm height and noticed a weak point breaking the…
Now takes less time and Modified to print with less amount of filament. Design works with Ender 3 Mod Pro By SathyaResearch 3D Printers. Originally designed by Volf. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No…
Original STL downloaded from Thingiverse but I can't find the link anymore. It was barely 3d printable but I fixed and remixed it for timeslapse. Total 3 poses. Time-lapse print video : https://youtu.be/uxLFw1A8tTA Remix to support free…
Multimaterial remix of the pretty figurine. 3mf files included
Remix Dummy 13 Weapons Pack Version ORIGINAL: https://www.printables.com/model/681425-dummy-13-weapons-pack-version-20
…Please be sure to hit like & post a make, I'd love to see your prints! EDIT: Please note, the hinges are elements from the original design & are not my work, yeah they’re a bit tight & no they’re not that great, but they do work. If I…
Skullmask for Halloween or Pen and Paper eg. Updated the mask for less material usage. Feel free to comment if it worked! → SkullMask_v2 I would strongly recommend printing the mask as one, even if it takes longer to print. I didnt trust…
This model was originally posted on thingiverse by me and is still available there if you want to read through the many comments and questions. This is a remix of the Satsana fanduct by eric-anastas for the purpose of mounting it on the…
Re-mix of the same concept from David - but with Clip-on mounting and it prints easier / lower warpage. Clip-on mounting Shroud Easy on / off without removing screws No supports needed Smooth bottom No airflow restriction only 3.6g /…
Subscribe Now! Time-lapse print video : https://youtu.be/6LVUM_R6hHY Remix to support free and printed. Subscribe to find out more support free 4K Time-lapse video: Subscribe Now! Addiction to 3D Printing? Watch these time-lapse!…
This nipper cutter holder is great for storing the nippers that came with your 3D printer! I added a closed tip onto Muh60's nipper cutter holder model to enclose the nipper blade for better safety. I used OpenSCAD to modify the original…
Official metric remix of Maff's amazing Netwonian reflector telescope nicknamed “Hadley” . Make sure you go and read his Printables post too, as well as the #hadley-instructions channel on his Discord server , as it includes some extra…
I really like mhejjas' Gridfinity 1 x 1 x 2 and 1 x 1 x 3 inserts with cover, divided in multiple ways , but I also wanted to make bins of arbitrary sizes. This is a parametric reimplementation of the original model in OpenSCAD, using…
At the provided scale, the inner diameter of the claw is 10mm. Scale it up to fit your use case. To make a thumb claw, I also scaled the model down in the Z direction so it would be stumpier. Normally I would provide a source file so you…
This is a remix of https://www.thingiverse.com/thing:526854 by https://www.thingiverse.com/mitchellharvey
Simple example of PrusaSlicer multi-material paint functionality to produce a Red+Blue+Black+White. Picture included used Polymaker PLA Matte Filaments; white always requires additional purge. Bottom of pants with supports could use…
This is the VaseRose_5cm and the stem_final stl's merged together in PrusaSlicer 2.6. With a slight trim of the stem to fit in the build volume of my Prusa Mini. It has a helper disk for stability. PrusaSlicer was nice enough to alert me…
Support Me Support my work by subscribing to my Printable club to have access to the multi-color version of the SLS Updates 17/02/2024 Stand redesigned with two versions, AMS/MMU and Multi parts. Description The " Space Launch System "…
This is a Remix made in Bambu Slice from Bugman_140 's Barry Bear with Fuzzy Skin. These are Ready to Print Files, made in Bambu Studio ( Don't know yet if they work on different Machines, please tell me if you tried ). Files are Sliced…
Remix of 3DDesigner's articulated Rayquaza on Thangs . I was unable to print the original, so I flattened the bottom, spaced out and curved the body pieces, and thickened the wing flaps. This is still a non-optimized print that needs…
I reduced the size of the hinge with respect to the original model. Also you need to download and print the clamp from the original model: https://www.printables.com/es/model/241692-filament-splicing-jig-remix The small tube is to prevent…
Fun fidget toy you can spin around your fingers making tricks and impressing your imaginary friend! Print a Christmas Chain of appropriate length (I'm using length 14, it feels nice) and attach the Ring and End to the chain. Ready to…
The model can still be print in place and print the cap separately. For those having difficulty printing the blades in place these can be printed separately too, just printing the broken section.
Allgemeines Ich fand das original Modell sehr niedlich, allerdings lies es sich mit dem gewölbten Boden auf der Unterseite nicht sehr gut drucken. Daher habe ich Modell angepasst und den Boden begradigt, sodass es sich gut drucken lässt.…
I printed in PLA Infill: 15% Layer Height: 0.10mm Supports: Yes, organic If you like my work consider Buy me a coffee 😊
I printed the Gridfinity base grid with snap connections by Neel but had some problems with snapping them together. They bent slightly upwards. Though I reworked them, and this is the end result. If you can't find the base you need,…
*** Yet another pose here: https://www.thingiverse.com/thing:4672484 Subscribe Now! A very good model from Velrock. Time-lapse print video : https://youtu.be/4lXVR1HwAAU Remix to support free and printed. (Updated to…
This is a support-free, FDM-friendly remix of the Goku model by 3DDesigner Original Model: https://thangs.com/3DDesigner/Gokustl-23498 No supports are required anywhere in this remix and it can be printed very easily. Check out the 3D…
Meet Emily, a charming 3D cartoon-style model of a cute little cow. Her rounded body, distinctive black and white spots and soft eyes offer a cute take on the cow figure. This model is perfect for toy collectors, as your desk mate or…
This is a remix of ricktu's Fractal Pyramid on Thingiverse that is more reliable for slicing in Cura 5.1.0. When sliced in vase mode, the original model had thousands of retractions on the first layer. So I edited the original models in…
I couldn't find a decent pegboard mountable battery dispenser since most of them were split for easier printing and ended up being not very stable. fns720s dispensers looked like exactly what I was looking for except that they are meant…
This is a remix of the great design of Bambu Poop Chute by Fantasy3DPrintsShop Uses 6x3mm magnets to attach the chute to the back of the X1C, P1P or P1S case. No supports are required. I printed using these settings: 0.4mm nozzle 2 layer…
Joined the four bottom parts of the original so that no screws are needed for assembly. Also made two different new tops. The middle ring remains the same as the original. Hope you like it and have fun!
I wanted to use the original model , by herbert , on my electronics bench, but it does not have a pegboard, so I remixed it to mount with screws or double-sided tape. This model matches the Pegboard Screwdriver Holder (7mm honeycomb and…
Total 3 stl. All support free. You can choose anyone if you print on resin while "FDM" means less overhang. Don't forget to post your made and sub my YouTube. *** Timelapse also feat. with Mandalorian Airbrush to Life by Michael Siller.…
V1.1 V1.1 has some minor updates based on some feedback. All models have been tweaked to ensure there's plenty of clearance for the build plate, there have been reports that some users find that the wiper pushes up the corner of the build…
Remix of this famouse model: https://www.printables.com/model/178035-cute-mini-octopus. It doesn't need any support.
A remix of SE3D model. (14Jun26) New folder organization (25May26) Added frontSkeletonCanvas, frontSkeletonCanvasNotFanScrews and frontVCanvas. Need 5x3mm magnet. Three preliminary front covers for Canvas compatibility. The second cover…
![[Official Remix] Flexi Extra Size Cat (Print-in-place)](https://media.printables.com/media/prints/1146999/images/8658584_808cb494-2549-4a42-b5ae-72f60e7726bc_9fdfc9b3-37cb-4725-a000-bcc358fe757e/extra-size-cat-1-2.jpg)
![#0017 [Remix] X2 Delta P Duct [V2R2.2] for the MK3S(+) [New Flow Splitter]](https://media.printables.com/media/prints/155387/images/3720913_fbdbd996-a1de-4291-8b9e-a4c2554d6d73/mod2-and-3leds.jpg)
![Voronoi Skull [remix]](https://media.printables.com/media/prints/858002/images/6593823_fdd9685b-c5d3-4b7a-8140-19b0d2dbdc92_d7509dcb-6470-4689-9f08-a7458615d0f6/2024-04-19_7d7ae7a7bc2618.webp)
![[Remix] Articulated Rayquaza](https://media.printables.com/media/prints/288542/images/2542205_0354d807-b437-4990-b04d-3bf33e2b0c3a/img_8900.jpg)
![Skadis Mountable Battery Dispensers (AA, AAA, 18650) [Remix]](https://media.printables.com/media/prints/249888/images/2246798_75dcb08f-f2a9-4a08-b0c6-adff86645ce4/skadis_battery_dispensers.jpg)
