128 models
Printing instructions: 0.16 mm 15% infill Printer must be able to handle 0.2 mm clearances (most modern printers can, I used the Bambu Lab A1) ASSEMBLY INSTRUCTIONS (IMPORTANT) The Top Dome file has a slight indent with the “The Finals”…
Here's my version of the Doctor's mobile emitter from the distant future setting of Starfleet Academy. Uses 6x2mm magnets. Use color swapping for the board. Hard to tell what colors it is, but it looks like green and gold with a red…
These decorated plates snap to the front of your Nukit Lantern, enabling you to transform them into a number of fun, kid-friendly shapes. You can also decorate the plates with stickers and markers before snapping them onto your Nukit…
Your Nukit Lantern can snap into this 3D-printed box, enabling you to flush mount it any surface and protect it from tampering- or simply for a cleaner install. The box can be printed without support using PLA. The emitter's vents will…
This is the iconic beam emitter structure from the first level you set foot on the holy ring. The geometry was extracted from the game and heavily modified to be 3d printable. There are a few built in supports that are designed for a 0.2…
This is a shell for the receiver (emitter) and the power pcb made by eatnooM. If you're interested in his Emitter PCB, see GitHub - eatnooM/sensorstrip: USB-C powered, slim IR emitter for use with Wii / light guns You can print most of…
I created a modular stand for holding my Quest 3 VR Headset, controllers, two portable power banks. It also includes a top cap on which an IR emitter can be mounted to allow for using VR in a dark room. In testing configurations out, I…
Here's my version of the Voyager mobile emitter. It uses 6x2mm magnets. The circuit board uses color swapping to get the green and gold colors. I used Prusaslicer's Arachne perimeter generator setting at .15mm layer height to get the…
The emitter from @Orion3D wasn’t designed to fit a typical sparring saber blade. This modified version can hold a blade and includes a set screw hole to secure it in place. While it works, it's not super stable—the parts the emitter…
Use 0.2mm nozzle for circut board, the rest works with any other nozzle, but 0.4mm is recommended. Assembly is pretty self explainatory, put the circut board in the top part and glue both halves together, easy alignment with the pins.…
Sometimes you have a rack full of equipment (cable boxes, etc.) that each need their own IR emitter for control, but allot of times these IR emitter's don't stick so well, or get removed/broken when the equipment/cable box gets replaced…
I teach a summer Star Wars class that culminates in every student building their own lightsaber. I didn't want every student making the same exact lightsaber, so I started deriving the original 3d models into mix-and-match alternatives,…
Tested with an iontopicks Aurora Elite XT 15 cm column (https://ionopticks.com/product/aurora-elite-xt/) but should work with all other XT columns as well. The second holder is designed for Phoenix S&T liquid junctions…
Printing instructions: 0.16 mm 15% infill Printer must be able to handle 0.2 mm clearances (most modern printers can, I used the Bambu Lab A1) ASSEMBLY INSTRUCTIONS (IMPORTANT) The Top Dome file has a slight indent with the “The Finals”…
Description The top and bottom parts are mostly accurate copies of the original guard. The stands, however, were redesigned slightly to be more robust and durable. If you've also damaged your emitter shield, feel free to use or modify…
The tubes need sanding down and a lubricant to fit but the emitter is fine
I liked the look of the emitter made by “Kaksu3D” much more than how the screen accurate saber looks, and i love that they are separated so that there's no real need to print with supports. However i got a bit confused having to mix and…
Here's my version of the holo emitter worn by Elnor and Raffi in Picard seasons 2 and 3. While it is hard to get a clear look at the prop--and there are no reference photos online--I did my best to get it looking close. I had no idea what…
Original caps had high water flow (there are 8 bigger holes) so the preasure with increasing amount of caps was rapidly dropping. I found out similar cap but still not fitting well in my case so I modified it: - cap size, thread and…
U-shaped irrigation emitter for smaller pots. Has a footprint of 100 x 110 mm. Barb fitting for 3/8" o.d. , ¼" id silicon tubing. No support needed when printing. All tests were done with PETG for outdoor installation. Works well with 5V…
This gasket design makes it easy to center 5050 emitters in Convoy T2/T3 hosts. I recommend printing in white ABS or ASA.
Here is an alternative emitter that will fit my other lightsabers. All sections are interchangeable on all sabers. All parts are printable without supports and are already oriented correctly for printing. Please, build and share. These…
I would recommend a 0.2 layer height, I initially tried to print in 0.12 layer height and ended up with some odd horizontal lines on my model which I did not get when I changed to 0.2 layer height.
The Pop Up Drainage Emitter in my yard was missing parts....naturally.....reverse engineered it and DFM'd the geometry. During the design phase I took the opportunity to get creative with the attachment. Both pieces are printed…
An IR LED emitter shell for OpenFire or Gun4IR Setups. This shell is designed to mount IR LED emitter on the back of an arcade front glass panel. This shell is designed for IR LED emitter PCB measuring 20x9mm, such as those types…
The reverse-engineered pressure compensation drippers were crafted from scratch, with a preference for printing the nozzle and outer part using 100% solid PETG/ABS material to ensure durability and withstand high pressure. These drippers…
Here's my version of the Doctor's mobile emitter from the distant future setting of Starfleet Academy. Uses 6x2mm magnets. Use color swapping for the board. Hard to tell what colors it is, but it looks like green and gold with a red…
Simple no-support 3D printable stake designed to hold standard drip irrigation emitters in grow bags, raised beds, and container gardens. Features Fits ~16 mm drip emitters Snap-in open ring design Flat print orientation — no supports…
Gravity Nozzle – Adjustable Low-Pressure Irrigation Emitter The Gravity Nozzle is an adjustable emitter designed specifically for gravity-fed irrigation systems with very low water pressure. It fits the most common micro tubing sizes (…
A custom emitter for you Savi's Workshop lightsaber. Category: Props
