Lenkerstopfen, Lenkerkappen Fahrrad / Bike Handlebar End Caps
Material wahlweise, z.B. PLA, PETG, ASA, etc. Layer: 0,15 - 0,2 Infill: 20% No Support, no Brim needed
- Downloads
- 353
- Likes
- 40
- Rating
- 4.75
296 models
Material wahlweise, z.B. PLA, PETG, ASA, etc. Layer: 0,15 - 0,2 Infill: 20% No Support, no Brim needed
Easy way to mark and label your changed tires. Just remove the cap of the valve, slip on the marker and tighten the cap. Einfacher Weg um gewechselte Reifen zu markieren. Einfach die Schutzkappe entfernen, Kennzeichen über das Ventil…
Zusätzlich erforderliche Materialien: 1 x M5 Mutter (8mm) 1 x M5 35-40mm Senkkopfschraube (Imbus oder Kreuzschlitz) Das Drucken der einzelnen Teile in verschiedenen Materialien (PLA, PETG) ist nicht erforderlich. - Bitte bei den GCodes…
EN: In the position specified in the .gcode file, the bowl just fits into the build volume of an MKS3+. Requires printing with supports. Quality with 0.3mm sufficient for the purpose. I designed the size for the existing stone shell,…
EN: As it occurred to me that the stone bowl for which I designed the tub may not be widely used, I had the idea of creating a stand for this bird bath / trough. You can find the trough at: See also: Grid for birdbath: Material: PLA /…
Check out: https://www.instagram.com/p/DMVZFMMtHdm/ The clock can be bought here: https://eu.store.bambulab.com/products/clock-components-kit-011?id=47743175819612
You need to melt a threaded insert (4mm metric) to the upper part and screw it together. The hinge ha a hole for an 2mm metric screw with a screw nut. Maybe you need to tape the cockpit to avoid damage.
Toller Aufsatz zum tropffreien Ausschenken aus einer Metrox oder Benta 2 Liter Milchkanne. In den Deckel für den Ausguss passt ein Gummi-O-Ring 31.34mm x 3.52mm, den man im Baumarkt im Sanitärbereich kaufen kann. Ich empfehle, mit ABS-X…
To redirect the filament waste downwards The waste diverter should be printed from ABS, ASA or HIPS otherwise the hot filament waste can get stuck in the diverter -------------------------------- Der Abfall Umlenker sollte aus ABS, ASA…
PLA is ok, I would recommend ABS because it has some flex. 0,2 mm Resolution 40 % Infill Tree-Support
Für die diesjährige Halloween-Deko musste natürlich auch ein neues Häuschen für die Sammlung her. Nachdem Haus in Sarg-Form im letzten Jahr ist es nun ein Hexenkessel geworden. Es ist passgenau für ein LED-Teelichter, damit die Fenster…
BESCHREIBUNG in Deutsch und Englisch DESCRIPTION in German and English Schiffe versenken Spiele den Klassiker zuhause oder unterwegs. Mit der praktischen Aufbewahrungsbox kannst du es überall hin mitnehmen. Drucke das Spiel in den Farben…
Verschiedene Spurwinkel Pfeile innen geben die Fahrtrichtung an. High- und Low-Kompatibel (die Teile können wie von Tamiya vorgesehen für eine hohe und eine tiefe Fahrhöhe verbaut werden). Es ist zu beachten das die Winkel immer vom…
Multi Toolholder for Skadis and HSW (drill/bit/allen) In this download you will find two Versions. One for IKEA Skadis, and one for the HSW Honeycombe This Toolholder will give you 19 slots for Drills (1mm-10mm 0.5 steps) 31 slots for hex…
Einfache Fliesenkelle/Zahnspachtel falls man mal ein paar Fliesen verlegen möchte und seine vorhandene gerade nicht findet oder man gar keine besitzt. Abstand der Zähne 3mm, auf Anfrage kann ich auch Variationen davon hochladen.…
coole und nervige geschenkidee für groß und klein, es werden insgesamt 100 schrauben benötigt .
Wanddicke 8 fach Düsengröße 0.4mm Layerhöhe 0.2mm Material PETG Drucker Bambu Lab P1P Druckzeit 21 min
Das hier ist eine Rätselbox, in der man Geld oder wie ich einen Gutschein verstauen kann. Der Beschenkte muss dann die Box knacken. Dazu müssen erst die “pusher” oben herausgezogen werden und mit diesen die “key bolts” aus den…
Lock for the blue handle zenker baking tray
The Clip was broken, so I re-designed it, printed it. Now I can re-enjoy eating some cake. Filament: Doesn't matter PLA, better PETG or other strong material. SHould fit the original, or not! Explore my other Printables:…
Smile Use Asa or ABS to Print 5 Walls 100 percent infill easy to install short version only dust cap-- Long Version for Blocking and safe your Bike
Don't buy what you can print on demand. Pro tip Use the 2x stl file, set the slicer to serial mode (aka “complete individual objects”), click fill bed with the model and just print the last meters of a spool to make this useful tool.…
Traxxas control arm Heavy Duty for Art.Nr.:TRX3655R Bigfoot Craniac HOSS 4x4 VXL Rustler Skully Slash 4x4 Stampede XO-1
Der Denker, Hexa Sculpture
I recreated some classic (JDM-)wheels. They're approximately 1:3 scale and have an diameter of around 13.5cm and a width of around 9cm. They're not a perfect copy as I drew them just after some pictures from the internet. Print them as…
I created tiles with letters of the alphabet in two colour. Each tile for every letter of the alphabet. The tiles have a hole for a small wire to create a “Name chain” for Babies. I printed several for the newborn childs of my friends.…
I got an action cam, but the mounts that came with the cam doesn't fit very well at the bike and to be honest I do not trust them. So I created some new mounts for the action cam. I think the holder should be identical to a number of cams…
DE Beschreibung: Passend für das Tamiya DT-02, DT-03 und DT-04 Chassis. Dazu gehören: Sand Viper Neo Falcon Desert Gator Neo Fighter Buggy Racing Fighter Buggy Aqroshot Fighter NXGEN und noch einige mehr. Ein Ersatzteil das dem Vorbild…
Wanddicke 8 fach Düsengröße 0.4mm Layerhöhe 0.2mm Material PETG Drucker Bambu Lab P1P Druckzeit 21min
Teile deine Botschaft über deine Schuhe! Diese Buchstaben passen auf normale Schnürsenkel (mit bissi Quetschen 😉)
This is my first Printables upload, so if you notice any mistakes please let me know. Be careful when inserting it, it could break if you press too hard. I have made the bars a little wider in the hope that it will last longer. If it…
Made it slightly more sturdy than the original and slightly increased the grip. Prints without support
I modeled the Enkei Aeronautics in a 1:10 scale with a 12mm hex for Tamiya-M chassis cars. I suggest printing them face up with supports turned on everywhere. I printed mine with a 0.25mm nozzle and variable layer height (0.15 for the…
DE Beschreibung: Passend für das Tamiya DT-02, DT-03 und DT-04 Chassis. Dazu gehören: Sand Viper Neo Falcon Desert Gator Neo Fighter Buggy Racing Fighter Buggy Aqroshot Fighter NXGEN und noch einige mehr. Eine Verbesserung zum Original…
diorama, sculpture usw
Update - PETG does not stand up to brake temperatures and they will deform and fall out The tabs should be re-modeled how u/AdOk980 commented in this reddit post:…
Etwas dickwandiger weil aus Blumentopf verwendbar, besser nicht zum Kochen
I initially didnt even want to post it, as it was an easy design, but I came across 2 different cake boxes, where a clip was broken, so I uploaded it here. I noticed, that there were direct replacemts here for the clip, but they shared…
DE Beschreibung: Passend für das Tamiya DT-02, DT-03 und DT-04 Chassis. Dazu gehören: Sand Viper Neo Falcon Desert Gator Neo Fighter Buggy Racing Fighter Buggy Aqroshot Fighter NXGEN und noch einige mehr. V1 ist ein Ersatzteil das dem…
Die Skulptur "Der Denker" sitzend auf einer Toilette!
DE Beschreibung: Passend für das Tamiya DT-02, DT-03 und DT-04 Chassis. Dazu gehören: Sand Viper Neo Falcon Desert Gator Neo Fighter Buggy Racing Fighter Buggy Aqroshot Fighter NXGEN und noch einige mehr. V1 ist ein Ersatzteil das dem…
The threaded ring from the mount broke, so I created a simple replacement using Tinkercad. It works flawlessly. --- Závitový kroužek od držáku prasknul, tak jsem vytvořil jednoduchou náhradu s pomocí Tinkercadu. Funguje bezproblémově.
Center cap I designed for my Enkei RPF-1 wheels. The wheels these were designed for have a 65mm opening. I included the original fusion file that has paramaters that should allow you to tweak most things. It's probably not perfect but it…
Hallo hier habe ich für den Reely Carbon Fighter ein neuen Querlenker konstruiert. Der Halter passt super beim Carbonfighter 3 da sind auch die Bilder her. Andere Carbonfighter Modelle wurden noch nicht getestet. Der halter hat auch ein…
Medaille/Schleife/Preis/Rosette für Vater. Als Geschenk für Papas perfekt auch zur Geburt oder Taufe vom Kind. Jeder Vater wird sich darüber freuen. Kann so gedruckt werden, dass die Schrift eine andere Farbe hat wie der Rest.
Seit einigen Jahren haben wir für unsere Weihnachtsgeschenke Stoffbeutel statt Geschenkpapier verwendet. Die Beutel konnten jedes Jahr wieder verwendet werden, sind mit Kordeln verschlossen und hatten jeweils ein Anhänger mit Namen. Diese…
I was inspired by the SiCK-68 but wanted a tenkeyless layout, so I designed it from scratch. Here are some other features I added in my design: Case holds plate at a slight incline Threaded inserts are used for the case-closing screws…
Busch und Müller ixon space Halter , zur Montage am Lenker inklusive gummilippe geruckt aus TPU
Zu Weihnachten wird (leider?) immer öfter Geld verschenkt - meist in einem Briefumschlag. Diese Schachtel mit Schiebedeckel ist eine Alternative zu einem solchen Umschlag. Die Schachtel bietet Platz für bis zu vier übereinanderliegende…
Gedruckt wurde auf einem Prusa MK4S mit 0.4er Düse, PETG
Adapter from 22,2 mm to 30 mm for an bike... Handlebar: 22,2mm => Part to mount 30mm Adapter für einen Fahradgriff Print Settings Rafts: Doesn't Matter Supports: No Resolution: 0,2mm Category: Sport & Outdoors
Original awesome remix part from Keep Making, please visit: https://www.multiboard.io https://www.multiboard.io/license
This model is easiest to print in its original orientation with supports for the clip legs. Unfortunately, in this orientation, the clip legs might be weaker and can break along the layer lines if pushed too much, e.g., when pulling the…
The Golden City arc (my favorite so far as of Spring 2025) features Denken more prominently than in S1 of the anime. This is for that 1 cosplayer! I went with more of the manga design. I cannot wait to see this arc animated! This build…
Kleine Nettigkeit zu Weihnachten zum verschenken. Kann mit PLA und Standardeinstellungen gedruckt werden.
Remixed wheel center cap designed to fit larger rims, specifically HONDA Enkei wheels. The model was resized for a precise fit and enhanced with an added logo for a clean look. The bottom layer is printed using an Archimedean chord…
let your imagination run wild If you need other forms, please write to me privately
Passt für Standardlenker (Durchmesser 25,4 mm/ 1 inch), Lochabstand 34 mm, Lochdurchmesser 5 mm. Für mehr Stabilität habe ich die Klemme mit 3 Perimeter und 20% Infill in PETG gedruckt.
Die Endkappen sind für einen Lenkerinnendurchmesser von ca. 18,5mm. The end caps are for a handlebar inner diameter of ca. 18.5mm. I used PETG Prusament orange and white. diameter: round 28*18 With support and 3 perimeter. Print time 31…
( 43250-80G00-LD8 ) This is a hub cap/center cap for the original OEM Enkei white wheel set for the Suzuki Ignis Sport. Diameter is 54.1mm so it might fit other wheels too with some changes. I recommend wrapping a single layer of…
2x Halterung für Senker-Set - Ø4.3-31mm - 37x9 - Lochwände oder Skadis Passend zu: S37x9 und Skadis Lochwände 2 Versionen: Ø5-31 und Ø4.3-20.5mm Montage Varianten / Anwendung: 1. Lochwand 37x9 => 1-3x Garant “Easyfix Grundplatte 2" - B67…
Die Bohrschablone für Rohre bis zu 25mm Durchmesser ist ein nützliches Werkzeug für jeden, der präzise Bohrungen an Rohren durchführen muss. Die Schablone besteht aus einem stabilen PETG rahmen, der speziell für die Aufnahme von Rohren…
Staubschutz zum Einsetzen in Euroboxen. Die Modelle wurden für die Eurobox (60x40x32 und 60x40x22) von Bauhaus modelliert. Es ist ein TPU Ring beinhaltet, der die Luftdichtigkeit Gewehrleisten soll.
Der Getränkehalter hat einen Durchmesser von 60mm. Die Anbindung für den Lenker hat einen Durchmesser von 24mm in kann mit den beigefügten TPU-Adaptern bis auf 20mm reduziert werden. Das verwendete Material ist PETG mit Farbwechsel im…
Hallo ich habe hier eine Hülle bzw. Lenkradbefestigung für Heschen Kippschalter Konstruiert mit Kabelausgang. Es ist genügend Platz um alles ordentlich zu Verkabeln. Das Objekt muss bei benutzung von sogenannten Gewindeeinsätzen mit…
Enkei (Evo 8,9, 3000gt, DSM Oem wheel) center cap. Eagle and DSM versions!
Dieser Halter dient der Aufnahme von 6 Stück Kegelsenkern. Ich habe ihn für Schaftdruchmesser von Senkern der Marke Exact konstruiert. Er mag auch für andere Hersteller verwendbar sein. Senker: 6,3 mm / 8,3 mm / 10,4 mm / 12,4 mm / 16,5…
I have an ongoing project of making the open, red rings for my Enkei Aeronautics, I'm currently driving them with the flat centercaps but lost one, so I decided to replicate those as well. There is the flat version to print with the flat…
Für die Spielzeug Traktoren von der Firma RollyToys einen Achsschenkel zu Reparieren. Von der Firma Rolly Toys gibt es dieses Ersatzteil auch zu haben. Ich hab dies aus den 3d Drucker gedruckt. Material PLA und hält seit ca 1 Jahr. Hoffe…
Material: 29 g TPU 85A Druckereinstellung: Layerhöhe 0,16 / Infill 20 % honeycomb / Wände 3 / Schichten 5 oben, 5 unten / No Support Kein zusätzliches Material erforderlich / no additional material required Gutes Gelingen und über ein…
Querlenker für einen Carson CR-4 Category: R/C Vehicles
This Enkei RPF1 3D printed coaster design is a perfect accessory for car enthusiasts who appreciate both style and functionality. Included the Fusion360 File, STEP file, and STL. The files also allow for customization and modification, so…
Medaille/Schleife/Preis/Rosette für Mutter. Als Geschenk für Mamas perfekt auch zur Geburt oder Taufe vom Kind. Jede Mama wird sich darüber freuen. Kann so gedruckt werden, dass die Schrift eine andere Farbe hat wie der Rest
Seperate the Two pieces before print and turn the kettle upside down Set the layer hight to max. ~0.2 Print without support Have Fun!
I needed to organize my tools so i designed some tool holders designed to be mounted vertically. This holder has flexible slots that can hold allen keys upp to 5 mm, but it can also hold other tools like small screw drivers etc. let me…
Insektentränke zur Montage auf einen Gartenzaun "Doppelstabmatte" 5cm Durchmesser 5cm Abstand der Stäbe... Die Tränke kann einfach auf den Zaun aufgesteckt werden. (Siehe Bild). Dank des eingelegten Siebes kann kein Insekt ertrinken. Das…
Dies ist eine Geschenkbox, z.B. für Ohrstecker oder andere Kleinigkeiten. Zur Montage benötigt man zusätzlich noch ein kleines Stück 1,75mm Filament als Scharnier. This is a gift box, e.g. for ear studs or other small things. For assembly…
I asked myself if the 65g (each) barends of my BMW F850GSA do something and changed them for 15g ABS (0.2mm layer, 5 perimeters, 5 layer top/bottom, 25% gyroid). Besides the 100g saved weight, there is no increase in vibration. I might…
Für mein neues Fahrrad habe ich eine bessere Lampenhalterung benötigt, da mich der große Gummilappen, mit dem die Lampe bisher befestigt war, immer gestört hat. Deshalb habe ich mir eine eigene Halterung für meine Fahrradlampe erstellt.…
Klemme für 22mm Motorrad Lenker für Kabel, Bowdenzüge, Bremsleitungen oder was auch immer. Der Durchmesser des zweiten Lochs beträgt von 5mm bis 14 mm jeweils in ein (1) mm Abstufung. Somit sollte für fast jeden Zweck ein passender…
Filament Spulenkerne mit intigriertem Kugellager, diverse Größen. Die Lager sind mit ausreichend 6mm z.B. Softairkugeln zu füllen. Gedruckt Mat.: PLA, ABS und PC Füllung 100% Getestet, funktioniert Hierzu gibt es noch: Spulenkern Halter .…
Die Endkappen dieses Fahrrad-Lenkergriffs haben nicht gepasst, daher habe ich selbst welche gezeichnet: https://de.aliexpress.com/item/1005002919072981.html Der Innen-Druchmesser des Lenkerrohrs beträgt 15,4 mm. Außendurchmesser der…
Warnkegel Warnleitkegel Baustellenkegel / traffic cones The part consists of several bodies for multicolor printing. PAL or PETG no support needed
Hier eine simpler Halterung für Senker ----------------- Here is a simple holder for countersinks
Gedruckt wurde auf einem Prusa MK4S mit 0.4er Düse, PETG, Vollmaterial. Organisches Stützen war eingeschaltet, gedruckt wurde liegend. Auf der Rückseite ist eine Aussparung für eine M6 er Mutter.
This is the first model I ever made… and I don't have any tips on how to print it…. Maybe, except for one… use tree supports. They work the best for the hilt or handle wrapping. Also feel free to check my YT account where I show the…
Recently I bought this ingenious little tool. To protect my pocket and also the very sharp Allen key tips of the tool, I designed these litte caps, which are connectet by a strap. So you don't have to worry about where to put the cap…
Derived from https://www.thingiverse.com/thing:4551005
Eine einfache halterung um einen LED Lenser P3R als Fahrradlicht zu verwenden. Zusätzlich wird noch ein Gummiband benötigt um die Klemme an dem Lenker anzubringen. Für andere Taschenlampen kann das Modell sicherlich auch noch skaliert…
Plastic holder for toplink. Kunststoff Halterung zum Oberlenker. Fendt 600 Favorit.
Ich habe ein Blech entworfen welches man vorne am Lenkerhalter einer S51/S50 anbringen kann damit es nicht so leer aussieht. Die Dicke beträgt 2mm plus 2mm Schriftdicke. Ich hoffe es gefällt euch ;-)
standard Ender came with 1.5mm, 2mm, 2.5mm, 3mm and 4mm allenkeys
Zur sicheren Aufbewahrung von Kegelsenkern. Das Loch in der Mitte dient für zusätzliche Kleinteile. Es gibt einen Standard-Deckel und einen Deckel "M57" mit einer größeren Toleranz. Viel Spass! For safe storage of countersinks. The hole…
Halterung für Garmin Navigationsgeräte mit passenden Löchern für Canyon CP07 Gravel Cockpit
Kegelsenker Einsatz für Festool Systainer Sys3 mit Deckelfach. Wird eingeklebt. Kegelsenker 1: 12.4mm Kegelsenker 2: 16.5mm Wenn der große Kegelsenker kippelt kann unter dem Schaft eine Stütze eingeklebt werden. Filament: Verbatim grau PLA
Gridfinity version of the original design. 3mf file contains support blockers for allen key holder.
Zwei einfache Wandhalterungen für Fräsbohrer und Senker. Der OpenSCAD Code für beide Halter ist dabei und sollte eine einfache Anpassung an persönliche Bedürfnisse erlauben. Ich würde dazu raten die Halterungen entweder in 100% Infill…