10 models
I smiled as the idea popped into my head :) And i have started to design. After 3 try and error finally working project. Expansion bar do not have length size limits, as it is extesible by water pipes 25mm diameter . Tested for door frame…
Print approx. €0.97–€1.19 excl. taxPreliminary estimate for one variant
This riser adds 7° of tilt bringing the total angle to 17°. What you need is: 2 #8-32 ½" screws 1 #8-32 Nut (I used a nylon locking nut) 1 #8 Washer 1 Mini Glue Stick (5/16") for anti-slip First embed the glue stick. Cut it to length,…
Print approx. €0.33–€0.40 excl. taxPreliminary estimate for one variant
Desktop stand for a PV780, or PV780B, or HV780 display. Includes holes for 8-32 mounting screws, or bezel mount. Recommended print settings: Layer Height: 0.2 mm or less Infill % : 15% Supports: No Print Orientation: Default as modeled…
Print approx. €2.80–€3.42 excl. taxPreliminary estimate for one variant
The Siedle bell system is yellowing very badly and does not look good anymore. Here are new bell plates 2-color design and a side panel in white. Die Siedle Klingelanlage vergilbt sehr stark und sieht dann nicht mehr gut aus. Hier gibt es…
Cyclone dust collector - home vacuum cleaner renovation project Install the device on a household vacuum cleaner to achieve: Very fine dust can also be collected in the container of the device. The original dust bag of the vacuum cleaner…
The Philips tape recorder N7150 has some common defects over time. This tape recorder is sold by different manufacturers (Example Aristona SR4149). The renovation includes replacing the right and left helicon inner gear of the reels and…
Printed with PLA https://www.youtube.com/playlist?list=PLNkED_syDmprsKfn9pWMwv1IGdb8OwBy-
Created this simple renovation token based off the one found in the Millionaire's Row expansion. Had to make it slightly larger then the original token to get some detail. However you will need to scale it up larger or use a smaller…
I have uploaded a 3MF file for this model to contain all parts for multi-colour printing. When scaling down the model, some of the walls become too thin to print with a standard 0.4mm nozzle, so make sure to print it at full scale if you…
This riser adds 7° of tilt bringing the total angle to 17°. What you need is: 2 #8-32 ½" screws 1 #8-32 Nut (I used a nylon locking nut) 1 #8 Washer 1 Mini Glue Stick (5/16") for anti-slip First embed the glue stick. Cut it to length,…
Print approx. €0.33–€0.40 excl. taxPreliminary estimate for one variant
