Search results: escape

LEDX from Escape from Tarkov

Printed on Prusa Mini Body with Galaxy Black PLA Buttons with Orange and Red PETG Have Fun! Buy it here: https://gamerch-shop.de/products/ledx

ESCAPE keycap for Cherry MX type switches

An OEM profile keycap that clearly marks an exit.** Keycap base model from another designer on Thingiverse, check them out here: https://www.thingiverse.com/thing:2783650 **Not just for Semiologists! Print instructions 80% infill 4 shells…

Mechanical Clock Escapement with Balance-Wheel

Since I saw a mechanical watch for the first time I wondered: How do they work? Why does it tick and why is it ticking with a constant frequency? And why is there this thing, which keeps tilting from one side to the other? To answer my…

Clock (Dual Ulysse Escapement)

I decided to convert TheGoofy's excellent clock ( https://www.thingiverse.com/thing:328569 ) to one using a dual ulysse escapement. Designed by Ludwig Oeschlin, it is a modern take on Breguet's natural escapement. The promised gain in…

Flying Tourbillon Model 5.2 (Daniels Double Independent Wheel Remontoire Tourbillon One Minute Escapement)

In Action: https://www.youtube.com/watch?v=Ij9UewAz\_rA The Mechanism: The title of this design (almost long enough to be a Lina Wertmuller film) pretty much says everything one needs to know. It uses an independent wheel (the rotation of…

Mechanical Clock Escapement with Balance-Wheel (M3 screw version)

Since I saw a mechanical watch for the first time I wondered: How do they work? Why does it tick and why is it ticking with a constant frequency? And why is there this thing, which keeps tilting from one side to the other? To answer my…

The remontoir gravity escapement mechanism

The remontoir gravity escapement mechanism Youtube video While developing a clock and researching methods to achieve a stable, constant‑force drive—similar to the solutions used in high‑precision mechanical timepieces—I designed this…

Runescape Party Hat

A Runescape Party Hat Category: Video Games

RuneScape Cash Stack

This is a stack of gold coins from Old School RuneScape.

Escape From Tarkov Death Shadow Mask

"Embrace the darkness, for it is the last thing your enemies will see." Extracted from Tarkov and made into a 3d printable model for cosplay or whatever. Not sure what scale it needs to be as everyone's head is different. At 100% scale it…

Low Profile Escape Keycap

Modified to fit with my other printed keycaps and added just the top so it can be glued onto the basic keycap from my project.

Watch Escapement Desk Toy (8-32)

This is a remix of LarkysPrints "Watch Escapement Desk Toy" ( https://www.thingiverse.com/thing:3364860 ) where the holes and hex cutouts have been enlarged to accept #8-32 US Machine Screws (approximately 4.2mm in diameter). This might…

Runescape Keycaps

Using the "Parametric Cherry MX/Alps Keycap for Mechanical Keyboards" as a template I created some keycaps that resemble some of the Runescape icons. The idea behind this is that it lets you easily see which function key is assigned to…

50 Percent Scale Watch Escapement Desk Toy (M2 screw compatible)

Update 2: 8/2/2022: Success! I no longer consider this effort a work in progress. This design can really work great once you get it assembled and know what to do to get it running excellent. It is very satisfying to watch it start itself…

USEC Patch - Escape from Tarkov

Add color change at Layer 21.

BEAR Patch - Escape From Tarkov

This is an Escape From Tarkov BEAR Patch that I decided to model and print, inspired by the patched sold on the official Tarkov merch store. I used images online of the BEAR logo and extruded it in Blender to create the patch, which looks…

OSRS Old School Runescape Potion Storage

if you want to use these commercially I recommend checking out Jagex's post on it: https://www.jagex.com/en-GB/terms/fancontentpolicy

Escaped Monster Cage 2-piece Halloween decoration

I printed these several times @ .20mm and 3 perimeters (for the bars) with no problems other that some stringing to deal with. It can be a little tough to line up those legs. I recommend starting on one side and working your way across.…

Escape Keycap

It is designed for Cherry MX. Escape logo for Escape Key.

Escape form Tarkov sign

Inspired by Escape of Tarkov game (if you don't know it, you should play it :)) Dimensions 8mmx16mmx2.6mm Stand: https://www.prusaprinters.org/cs/prints/154505-sign-stand Print instructions Use filament change feature for last 3 layers My…

Clockwork using Galileo's Escapement

Tick-tock, tick-tock, tick-tock. What lies between the beats of time? Rythme. Satisfying to build, watch and listen. I was having a lot of trouble seeing the proper angles for designing a deadbeat escapement from scratch, so I started to…

Old School Runescape dwarf multi cannon

Exported from runelite, patched, and modified for 3d printing. All parts should print without supports, though depending on the printer you may need supports for “cannon base” I print with 2 walls and 5% infill. CA glue to join all pieces.

Halloween Ball Escape Magic Trick

I have included two Halloween themed versions of the trick as well as the regular ball and box version. Watch the included video to see how it's done before you download. I like to use paracord for the string. I recommend taking out the…

Escape Key cap

Escape Key Cherry Red (First DRAFT)

Old School RuneScape runes

Pick your favourite runes :) Air Fire Nature Law Blood Water Cosmic Earth Death Chaos Astral Mind Body Soul Wrath

Escape From Tarkov - LABS LED Wall Sign

I created a LABS Sign because I was not able to find one, which fits my wishes. During my tarkov hype phase I wanted to have something, what decorates my gaming setup. (do not keep an eye on the line which the A throws → A was not clipped…

Escape from Tarkov [Head, Eyes]

Every single tarkov player had seen that message at least dozen times :D Now you can print it so it will stay with you forever. Don't forget about filament change at layer 11 (if printing with 0.2mm layer) First 2mm is just black…

Yeti Rambler (26oz) Adapter Ford Kuga/Escape

A simple model that adapts the 26oz Yeti Rambler to the TF MkII Ford Kuga/Escape centre cup holders. I haven't test fitted in any other series of the Ford Kuga/Esacpe but it's possible the centre cup holders are the same size, if you…

Escape From Tarkov Coasters

EFT themed coasters.

50mm Pendulum Clock Escapement

Disclaimer This is a work in progress and iterative testing is done to facilitate the design improvements to get a perfectly working escapement. Test Results and Revision History V11 - 7 July 2024 Sadly, the first test attempt(v11)…

Aquarium Cave 1 Remix -Snail Escape Hole Edition

I loved the original model but was concerned that snails (especially clumsy nerites) might fall over in the cave and get stuck. I opened the top of the large cave on the right to allow them access in and out from the glass.

Survive: Escape From Atlantis! - Better Boats

I designed these boats to better hold the meeples in Survive: Escape from Atlantis! When moving the original boats during games, we found that the meeples inside would often fall out. In Survive , the point value is indicated on the…

Poop Tower Game (purge escape - jenga style)

Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…

Escape from Tarkov Medicine case Medcase

A medcase from Escape from Tarkov. For healing outside combat. Has a sliding lid for closing. Pulled it as an .obj from the game files, hollowed it out in F360, made a sliding lid mechanism. Will make some other cases soon. If you want…

SUNLU S1 Dryer Lid Humidity Escape Vent Mod

~3deg and ~5deg open lid variations. The 3deg allows the temp to get a few degrees hotter in my environment. My humidity reader always stays around 10% maximum with this mod. Without it, the humidity was always 20% minimum inside the…

Kanji Symbol for Escape-Hide-Flee Computer Key

Kanji Symbol for Escape-Hide-Flee Computer Key

"Watch Escapement Desk Toy"

I have completely reworked all parts, and included a small rotating dial. The parts were printed on my Sidewinder X1. All parts are made of PLA Bed temperature 60° Print temperature 200 The watch works fine. The 2 sliding blocks can be…

Three dials combination puzzle lock for an escape room

This is a sliding type lock with three separate double dials that can be set to any number 00-99. I have made this as a part of sort of escape room like puzzle game for my wedding. The three numbers were results from other tasks, so this…

War Movies - The Great Escape - 1963

⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…

Runescape Coaster - Air Rune

I created several coaster models based on this model. The rest are on my profile. I really wanted to print some Runescape themed coasters, but found that the models already out there were kind of bad. Print with 20% infill for best…

Escape Room The Game keys

I recently bought the base game of Escape Room The Game on a flea market only to realize that the box doesn't contain any of the 16 keys that were mentioned in the manual. That's why I decided to model my own keys. I was basing my design…

Articulated Jason from Roblox Escape Area 51/Forsaken (Roblox Figure)

-Kiki mama. (Im replacing FanBlox for this one, print in PETG with Tree supports.) NGL this was not hard at all. Just ate slashers head and gave it CI's mask. SOB

ABS printable Escapement Spring for 3D printed mechanical Clock with Anchor Escapement

This is an update of downeym's Escapement Spring modification that is designed for printing with more flexible ABS. I found that the existing one was too floppy when not printed with PLA, so I thickened the spring section 2mm. Print…

Survive: Escape from Atlantis! / The Island insert

Box Insert for Survive: Escape from Atlantis! aka The Island and it's expansion (5-6 players + dolphins / octopus / blue dice) Made to perfectly fit in the original box insert. You need to print one of each file, except you need 3 times…

Bienenflucht Bee Escape

Dies ist eine Bienenflucht, sie wird verwendet um kurz vor der Honig-Ernte die Bienen aus dem Honigraum zu halten. Ihr müsst euch diese Datei drucken und zusätzlich noch ein Holzbrett nehmen und dieses auf euer Kisten-Maß zurecht sägen.…

Runescape Coaster - Fire Rune

I created several coaster models based on this model. The rest are on my profile. I really wanted to print some Runescape themed coasters, but found that the models already out there were kind of bad. Print with 20% infill for best…

Runescape Connection Lost Plaque

The “Connection Lost” message from RuneScape. To match the in-game appearance, start with black filament and switch to white when letters begin to print. Beware of scaling down, because I got poor results slicing with Cura 5.1 on the…

Oldschool Runescape Chess Set

I designed and printed this chess set for someones birthday and I have not played runescape in the past so the pieces may not be 100% accurate since there arent many clear reference photos on the internet but I did my best. This model…

Runescape Coaster - Death Rune

I created several coaster models based on this model. The rest are on my profile. I really wanted to print some Runescape themed coasters, but found that the models already out there were kind of bad. Print with 20% infill for best…

Escape From L.A. - Snake Shuts Off World - 1996

⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…

Runescape Lobster Fixed + Keychain

Added some extra material to the right arm (had a tendency to break off) and thickened the antenna. Also made a version with a keychain hole cutout. Category: Food & Drink

Runescape Coaster - Water / Blood Rune

I created several coaster models based on this model. The rest are on my profile. I really wanted to print some Runescape themed coasters, but found that the models already out there were kind of bad. Print with 20% infill for best…

Runaway Escapement Mechanism With Optional Windup Car

Designed as a science fair project for the grandkids, this model can be used as just a 3D printed runaway escapement spring motor demonstrator, or with the additional drive components, a 3D printed runaway escapement spring motor car. The…

Escape From Tarkov Gamma Container

Edge of Darkness Edition Secure Container Gamma. a 3d printable replica of the Gamma Container from Escape From Tarkov. The safest place for all of your IRL roubles, keycards, and LEDX's. This was really fun to model and build. I wanted…

MS2000 Marker - Escape From Tarkov

M2000 Marker from escape from tarkov

Escapement Mechanism - Deadbeat/Graham

Escapement Mechanism in the Graham aka Deadbeat style

Coin Holder for 2020-2022 Ford Escape

This coin holder fits between the two cup holder pockets in the center console of 2020-2022 Ford Escapes. Printable without supports and for hot environments it should be PETG or higher temperature filaments. Coinholder_c is flush with…

Swiss Escapement Desktop Fidget

SUMMARY/DESCRIPTION: I've always enjoyed the sound of old wall clocks, and decided it would be a great challenge to design and create my own device that mimics the sound while also working as a small desktop fidget toy. I'm not a…

Runescape coasters and Holder

I made this coaster set and holder for a Reddit secret Santa a couple of years back. When I uploaded it the first time, I did not have a base on it because I just used the pieces to make it. I have now added a base for a print-in-place…

Runescape Coaster - Law Rune

Runescape Law Rune coaster

Lucas & Max – Hospital Escape Figurine (Inspired by Stranger Things)

🎬 Scene Context (Story Description) Inspired by the hospital escape moment where Lucas carries Max through the corridors while Demodogs close in. The pose represents urgency, protection, and survival, translated into a stylized…

Escapement model, Swiss lever escapement

Origin I made this model to use in watchmaking courses to explain the function of the escapement. It is modeled after the escapement in the movement Zweigesicht-1 from Marco Lang. Marco Lang provides the CAD for the movement on his…

Runescape Coaster - Earth Rune

I created several coaster models based on this model. The rest are on my profile. I really wanted to print some Runescape themed coasters, but found that the models already out there were kind of bad. Print with 20% infill for best…

Escape From Tarkov VOG Grenade

Just a VOG Grenade from Escape From Tarkov. Fuse is missing because I did not know how to make a 3D printable version. Buy it here

Escape from New York, Snake Plissken mack 10

Here is our version of Snake Plisskens mack 10 from classic movie Escape from New York. We are also on gumroad where we list cutup/slicedup props, heres few links of sweet prop files our Thanos sword gum.co/pXLb our Red Queen Sword from…

RuneScape Torva Cosplay Armor

EDIT: Wow, printables apparently removed a lot of the attached images in the description and the ENTIRE zip file of the model files. I have no idea how that happened or how long this post has just been a preview mode, but THE ACTUAL FILES…

Runescape Bot

The Classic Runescape Bot/generic player model Category: Video Games

Exit Sign Escape Button Keycap - Two Parted

Since i invented the 2 parted Keycap Design for my Linux Distro Super Keys and i really liked the Escape Sign Button by Jallim , i made this Version of the Keycap. It is not really a remix since i made it based on my other Design but i…

Escape Room Prop - Simple candlestick with maze and secret compartment

This set of candlesticks includes files both with and without a secret room, locked with a maze. The maze is marked with a small key, to give the player with a watchful eye a hint that something is hiding inside. You can print the entire…

$11 Old School Runescape Rave Crab

$11 platform designed to fit in the hands of the rave crab model that is included here which was not made by me. Crab Rave model is by Tahu505. You can find the original by searching "crab rave tahu505" on Google or your preferred search…

Escapement mechanism

Simple mechanical escapement mechanism

Survive Escape from Atlantis Replacement Parts

Print with 2 walls and 30% infill for similar weight and feel. Try wood filament for the ultimate replacement.

Funnel with Air Escape Vent and Optional Fill Gauge (Scalable)

I specifically designed this to help me refill my handsoap container, which looks nice but has a small opening and is opaque so when I am pouring I can not see how full the bottle is getting, leading to overfilling. Although the…

Prokill Medallion Escape from Tarkov

Prokill medallion from Escape from Tarkov / contract wars

PopCap Fire Escape Shelf (NO Supports )

Wanted a shelf to put some Pops on. Only one i could find had sooo many supports and was not large enough to hold 12 Pops. Size if printed as pictured: 22x12x4 but can be made as many levels as you wish just print a ladder for each level.…

Windup mechanism with planetary gearbox and runaway escapement mechanism

It requires some lubrication. I attached the FreeCAD file and the thesis I used to calculate the escapement (WAYNE RUSSELL MUNDY: The analysis of runaway escapement utilised in clockwork mechanisms). Assembly

Holders for iPhone XS and 11 Max for CD slot in 2014 Ford Escape

I tried a few different iPhone holder models for CD slots and liked the one by Accord56 the best as it sits snug in the CD slot, allows you to change the viewing angle, and you can replace the actual phone holder in case you get a phone…

Clock escapement system (simple)

This is a clock escapement system I designed since I was bored. It is not the best and is a little hard to get going, but is an easy to understand and a quick print for those who want to learn, teach, or want to built of of it. It does…

BEAR and USEC Patch - Escape From Tarkov

It can be printed on any material, I personally made it in TPU for greater flexibility.

Runescape Coaster - Nature Rune

Runescape Nature Rune coaster

Bombe Airsoft / Escape Game

/!\ Prototype TEST /!\ By LuLu & Seriase

Fly Swatter "Escape" & "NoEscape"

Print the swatter with TPU, possibly also the clamp. The stem should be printed with "stiff" material Glue all together, use hotglue . Drucke die Klatsche mit TPU, ggf. auch die Klammer. Der Stiel sollte mit „steifem“ Material gedruckt…

Escape the Curse of the Temple Modular Insert

This insert was a very long labor of love, I hope you enjoy it as much as I do. If you want to support my work and all of the free designs I donate to the community consider buying something from my Etsy shop or my Printables Store .…

Runescape Coaster - Mind Rune

I created several coaster models based on this model. The rest are on my profile. I really wanted to print some Runescape themed coasters, but found that the models already out there were kind of bad. Print with 20% infill for best…

Runescape (OSRS) Life Size Dragon Warhammer

Hello All! Here is a OSRS Dragon Warhammer model that I created. This model is not an exact replica of the in game Warhammer but a homage to the item that is easier to print. I created this model in many pieces that all link together with…

Mark of Grace - Old School RuneScape

This is a mark of grace. Two options: Print in pieces and assemble - pieces labeled “1”, “2”, and “3” - or - Print one solid piece - labeled “One Piece”

Ironman Helmet | Oldschool Runescape Keychain

Bring a touch of RuneScape to your everyday life with this detailed Ironman Helmet keychain! Perfect for fans of the Ironman challenge, this keychain design is optimized for 3D printing and makes a great accessory for backpacks, keyrings,…

Sunlit Poolside Escape

Runescape Theme Gold Piece Guthix Mint Coin

Ever wanted to 3D Print 10gp so that you can pay the Al-Kharid toll? Bank of Gielinor is proud to announce the new Guthix Mint of the Runescape Gold Coin! Pick your favorite mascot to conduct your commerce, and enjoy stackability and the…

Escape From Tarkov - Moonshine

Moonshine from Escape From Tarkov. I've scaled it to about roughly the same size it would be in game (from my perspective). As u can see, I might have ran out of filament during my print :) The print takes about 3 Hours and takes give or…

CAUTION - MY SENSE OF HUMOR IS SO DARK THAT NO LIGHT CAN ESCAPE IT, SIGN

CAUTION - MY SENSE OF HUMOR IS SO DARK THAT NO LIGHT CAN ESCAPE IT, SIGN Category: Signs & Logos

Runescape Coaster - Wrath Rune

I created several coaster models based on this model. The rest are on my profile. I really wanted to print some Runescape themed coasters, but found that the models already out there were kind of bad. Print with 20% infill for best…

OSRS/Runescape Amulet of Glory Cosplay

No supports or brim needed. I reduced the gem in slicer to fit. 97% was perfect after painting both pieces. This was a rushed project for a last minute Halloween costume and could certainly be improved. I designed it to resemble the…

The Shawshank Redemption - The Escape - 1994

The Shawshank Redemption - The Escape - 1994 3D printable model.

The not esc escape keycap

credits to 3dnerdcave on printables for the main keycap model. This is just a keycap for your escape key that is a maybe funny joke. this also shouldnt need supports.

Runescape Quest Icon Spinner

This is a moving spinnable version of the quest marker icon from the MMORPG ‘Runescape’ made by Jagex. Introduced in the quest ‘Ancient Awakening’, The new in-game spinning quest marker was far easier to see and use. Reddit users were…

Bee Escape

Lets you create an escape board for your beehive. Instructions This is used to create a bee escape board. The edging on your board needs to be about 1/2" (12 mm) so that the bee escape doesn't rest on the hive box below it. It's your…

Advanced Crew Escape Suit (Pumpkin Suit)

https://en.wikipedia.org/wiki/Advanced_Crew_Escape_Suit Current scale 1:6 Category: Sculptures

Gnome Child, From Runescape

The Meme that is Gnome Child. From Runescape. Very low poly and definitely needs painting. Category: Video Games

Locked Box for escape game

This box contains a big pocket with a door you can lock with a lock or even with a haspe for multiple locks (see picture) and an small tray below you can lock with an single lock (diamater of the hole is 4mm). You could e.g. put some…