Counting matching models…
Remixed from another model on Thingiverse, I made a number of small changes to improve on the design. This model still uses the original top part for the drip tray. In the previous design, drips would be trapped in between the tray cover…
I used the Nespresso Capsule Holder by pcornelissen as a base for this Nespresso capsule holder. It is specifically tailored to the Krups Essenza Mini. I used 10% infill for the base and 0 for the cup holder part. Supports are only needed…
Why? Wanted to use my El Arroyo Quotes mugs on my Essenza Mini Nespresso machine. Designed with Fusion360 How to print? STL files are oriented as they should be printed The “top” part needs supports around the lip Use black PLA, consider…
Wall mount for Nespresso KRUPS Essenza Mini....
This is a lower tray for the nespresso essenza mini (round variant). with this you can put bigger mugs under it and not worry about the drips if you forget to put the original tray back. the cap is a tight fit, if you plan on removing the…
Made this design for a friend. This makes it possible to place cups up to 11cm under the coffee machine "Essenza Mini" from Krups (Nespresso) Print Settings Printer: Artillery Sidewinder X1 Rafts: No Supports: Yes Resolution: 0.30 Infill:…
With the flat drip tray, taller cups also fit under the machine. Support is required due to the overhang and the hook-in opening.
A simple and very helpful print to store your capsules where you need them! The print holds 24 capsules while resting against your coffee machine. Designed for the Essenza Mini from Krups. In the bottom is a cutout for the screws of the…
The Krups Essenza Mini comes with two tiny driptrays. One is full after two cups of coffee, the other is always near empty. So I created a single compartment which does fit the original parts.
I did not found a good and sexy bracket for the nesspresso essenza mini from krups. so i designed one. the essenza mini capsule bracket is a modified version of the capsule stand from https://www.thingiverse.com/thing:4282570. i mounted…
I like americanos and I like Nespresso. This tray allows you to use a large cup without removing the bottom tray. I have printed in PLA and PETG without issue. top part of tray fits tight, may need like sanding. use 10-15% infill.…
I modelled the original stand and then increased the area on which a cup can be placed. The optional brim is an anti-slip feature that should be carefully superglued to the top of the new stand. Print this in a food-safe material or…
Hello everyone, Here is a replacement capsule container I made for nespresso Essenza (old version). I printed it in PETG and for years I've used it, no issue. Print Settings Printer Brand: Wanhao Printer: Duplicator 6 Rafts: Doesn't…
Tired of emptying out your Nespresso waste bin so often? This bin replaces the factory bin with one that doesn't have a base, allowing the used capsule area to expand into the space below and fit another 2 capsules. This model fits with…
Replacement clip for the water reservoir of the Nespresso Krups Essenza Mini Intense machine. UPDATE 2022-08-09 Added a version to be printed in ABS, this needed slight tweak to the model. So if your fit is to loose, you can use the…
I had my DeLonghi Essenza Nespresso machine up on a wooden block so I could fit my usual coffee tumblers and travel mugs under it. We usually make latte's. So I made this riser that fits flush with the sides and supports the whole…
In order to be able to use larger cups, I designed this lid for the drip trays. Print Settings Supports: Yes Category: Kitchen & Dining
Large base for Nespresso De'Longhi Essenza Mini so you can use large cups for coffee.
I love my Nespresso Essenza Mini coffee machine, but unfortunately it is too small, so my mug didn't fit under it. Not anymore, with this stand now there is enough room for almost any kind of mug. At first I printed a prototype with PETG,…
Was tired of having to baby-sit my regular sized cups when using the nespresso. Designed to only have the hook supported during printing but could be printed without supports.
Nespresso travel mugs are tall, so they don't fit into space under Nespresso Essenza Mini coffee machine. This ~2cm pedestal lifts the machine to make it possible. The cutout in front allows to use original cup holder. Print it with…
Cesto Capsulas Usadas Nespresso Essenza C90 C101
Untersetzer gleicht Höhenunterschied bei der Verwendung von Silwy-Magnetpads (z.B. im Camper) aus. Zusätzlich benötigtes Material: -Doppelseitiges Klebeband (Verbindung Untersetzer und Abtropfschale) -4xGummipuffer (Als Füße)
The Nesspresso Essenza Mini is a great little coffee machine, but the cup holder's drip tray is prohibitively large and makes it impractical for most coffee cups to fit. The replacement drip tray/cup holder is small, neat, and regular…
Large base for Nespresso De'Longhi Essenza Mini, so you can use large cups for coffee.
This model lets you customize your Nespresso Essenza Plus Reservoir Sleeve while still seeing the water level. It does not require supports. I used an ice blue PLA filament, but anything will do.
1 cm Riser / Feet for KRUPS Essenza Automatic About this model My KRUPS Essenza Automatic has a leak when making coffee, and I haven't been able to figure out exactly where the water is coming from. To help the water drain out and prevent…
With the flat drip tray, taller cups also fit under the machine. Support is required due to the overhang and the hook-in opening.
This model lets you customize your Nespresso Essenza Plus Reservoir Sleeve while still seeing the water level. It does not require supports. I used an ice blue PLA filament, but anything will do.
1 cm Riser / Feet for KRUPS Essenza Automatic About this model My KRUPS Essenza Automatic has a leak when making coffee, and I haven't been able to figure out exactly where the water is coming from. To help the water drain out and prevent…
these plastic parts are made for the Nespresso Essenza Mini coffee machine, consisting of a collection tray for used cap
This is a big cup adapter for the Nespresso Essenza Mini D. With this adapter, you can easily use larger mugs without worrying about spills. You need to print the lower part of the adapter, as the original cap remains compatible. I…
I accidentally dropped the water reservoir of my Nespresso Mini Essenza machine (mine is made by De Longhi) on the ground and the hinge for the reservoir lid broke. So I quickly put together this replacement part which works great. In…
Capsule stand for both sides of the Krups Nespresso Essenza Mini
The original Part is made in ABS, I used PCTG for my print, but something with higher temperature resistance would be better.
This is a low profile drip plate with 4 decorative options so you can fit a normal mug in the nespresso mini. It is printed with PLA in this form so not dishwasher safe. give you 4 decorative options that can be printed in any color.
I made a few minor modifications to kwilabs3d's model (thanks). This model can now slide under the machine, making it much more stable. I also added a slight tilt, so it is closer to vertical when the holder is full of capsules. Like the…
Remix of https://www.thingiverse.com/thing:2730719 The original was ok but for some reason it did not have holes to let water drain. Printing instructions No supports needed
Lamborghini Essenza SCV12 as a 3D Model. This design can be scaled to any size in your slicer. Print flat with ~5% infill to save material. Perfect as decoration. Category: Signs & Logos
NOTE: Made specifically for the Essenza D30 manufactured by De'Longhi, the model with the angled body and slotted drip tray. Ensure this is your model before printing. Girlfriend was using an awkwardly shaped cup that teetered the edge of…
Once I downloaded model from this site and was happy with it. Then I needed to replace waste tray for my De'Longhi Nespresso Essenza Mini EN 85, however could not find 3D model to print it. I made 3D model myself and uploading here hoping…
replacement for the original four-piece set náhrada štvordielnej originálnej sady
Replacement top pieces for PetrosB's excellent mug drip tray for the Nespresso Essenza Mini, designed in OpenSCAD. I went with a smaller number of larger holes to reduce flex, and added a teardrop-shaped hole for the drips. I also added a…
A replacement basket for the NESPRESSO ESSENZA MINI
I design this tray because I win a nice tall cup and it doesn't fit the space between the top and bottom with the original tray. This “low profile” tray fits like the original and allow tall cups to be used. Also, looks like the Essenza…
The drip tray for my nespresso machine was too small for my cups, they weren't stable on the stock drip tray. This one is larger.
NOTE: This will not fit the Breville version of the Essenza Mini, which has a different front profile. This is for the DeLonghi Essenza Mini only . Our 13 year old(!) DeLonghi Latissma+ finally bit the dust, and we replaced it with a…
A tray for Nespresso Essenza Mini D30. The original tray is way too high and can't fit my favorite cups. You can use the original lid on it or print the even lower option. I used Esun pla+ and everything great with it after 6+ months of…
Low profile Nespresso essenza mini drip tray. This will allow usage of taller, normal, coffee mugs with this excellent machine. Support are needed for the back “hook” , I suggest to use Normal, Snug . My pictures show the base printed…
