Nespresso Krups Essenza Automatic Riser
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
1 cm high riser for Krups Essenza that fits directly in the screw holes.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 4
- Makes
- 0
- Views
- 61
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
1 cm Riser / Feet for KRUPS Essenza Automatic
About this model
My KRUPS Essenza Automatic has a leak when making coffee, and I haven't been able to figure out exactly where the water is coming from. To help the water drain out and prevent it from pooling underneath the device, I designed these risers to lift the machine by 1 cm.
Design Features
Easy Installation: Designed with a snug fit, these risers can be inserted directly and firmly into the existing screw holes under the machine. No glue or extra hardware required.
Compatibility: Modeled specifically for the KRUPS Essenza Automatic, but it may also work with other models that share the same chassis base.
Print Instructions
Quantity: You need to print 2 units.
Infill: The part can technically be printed with 0% infill, but 5 % at least is recommended to ensure good structural integrity under the weight of the coffee machine.
Material: PLA is sufficient.
If you want to adapt this for another project, the peg diameter is 9.1 mm, and the distance between the two holes is 90 mm.
Note: The PLA I used for the prototype looks much worse in photos than it does in real life.