Counting matching models…
A simple but effective freestanding 3D F1 logo. The logo is designed with a discrete backing to keep the lettering upright and spaced. The backing also means no base is needed as the logo is self supported. Perfect as a home decoration or…
Update 01/05/2023 Added “HSW Ez-V1 Foot Type 3 v1.0” Update 01/05/2023 “HSW Ez-V1 Foot Type-2 v1.0” added for better stability on taller walls and for double-sided walls. -------------- These feet use the Ez-V1 series clip and therefore…
https://www.buymeacoffee.com/maxt ---------------------- 2mm thick The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as it gives the best…
Do you want to use your old phone as a webcam? If so this print will help you to mount your phone on top of your monitor. I made this because i couldn't find a model to fit my monitor monitor (fits all my MSI monitors). This is also my…
A freestanding replica 3D NASA worm logo. The logo is designed with a discrete backing to keep the lettering upright and spaced correctly. This design is a replica of the NASA worm logo but has been tweaked very slightly to make the “N”…
This is my take on the well known and loved phone stand with hexagon pattern. I fixed some things about it i did not quite like that much, the changes i made are as follows: One continous patch of hexagon-pattern runnig round the whole…
A freestanding 3D SpaceX “X” logo. The logo is designed with a discrete backing to keep the lettering upright and spaced correctly. If like myself you are a massive fan of SpaceX and everything they do then this is the perfect print for…
Print Settings: .30mm, 5% infill, No Supports. Rotate 45 degrees on print bed. I added a version with a thicker back ( Freestanding_Sunglass_Rack_4mm_back.stl )
Letter vary in height and width from about 65mm to 80mm and are 20mm thick. They can of course be scaled to the required size. For a nicer front finish, try flipping the letters face down if you have a smooth or textured build plate.…
These T-Slot nut were made especially for the prusa mini aluminium extrusion (289mm) found on the official GitHub repository. The major advantage of these t-nut is that they are made to be freestanding, once turned 90° inside the…
Remix of Dom's Peanuts-Woodstock model for freestanding print display. Remix printed with Prusa Pineapple Yellow and Matte Black PLA; 0.20mm Layers; nice 15% infill; no supports. X and Y dimensions can be adjusted to fit display needs. A…
https://www.buymeacoffee.com/maxt ---------------------- 2mm thick The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as it gives the best…
Easy to print Switch game stand for 11 Games. No Support needed!
This is just Westy's GPU support, but with a wider base at the bottom and a larger “shelf” on top to support your card. I also scaled the base 1% larger, as the screw was far too tight to screw in all the way.
https://www.buymeacoffee.com/maxt ---------------------- 2mm thick The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as it gives the best…
https://www.buymeacoffee.com/maxt ---------------------- FEMALE VERSION: https://www.printables.com/model/334054-christmas-deer-female-freestanding-use-christmas-o 2mm thick The model will fit on Prusa Mini+ (180x180) Feel free to size it…
Easy to print two (or more) colored videogame stand. For multi color just make a filament change at 2.2 and 22.2. with 0.2 layer hight. Then you can print the direct with the stand. No Support needed.
Downward Dog Pose People practicing yoga know this asana. Printing without support is exactly in the position in which you download this file. Category: Mobile Phone
https://www.buymeacoffee.com/maxt ---------------------- 2mm thick The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as it gives the best…
This is a freestanding mount for a Buddy 3D camera. I wanted a mount that wasn't attached to the printer (to reduce vibration and improve stills) while adding additional height and a slight tilt (20 degrees). Posting so it may benefit…
This small shelf holds my coffee paraphernalia and is comprised of 2 3D printed legs and a plywood board. I attached self adhesive rubber feet to the bottom to prevent any wobbling/sliding. The legs are 200mm high and have 2 screw holes…
The readymade .stl is made for a Skoda Fabia 3 (and probably fits other cars for the Volkswagen Group), but you can modify the dimensions in Fusion 360. Since I think most people use a case on their phone, it's designed with this in mind.…
https://www.buymeacoffee.com/maxt ---------------------- 2mm thick The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as it gives the best…
https://www.buymeacoffee.com/maxt ---------------------- 2mm thick The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as it gives the best…
https://www.buymeacoffee.com/maxt ---------------------- 2mm thick The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as it gives the best…
Printable without support, made it in PLA+
He sits on your desk ready to assist you. Holding up your phone (or potentially jewellery). Granted he is not that small but he fits on the bed of the MK3. If you slice the model yourself you could decrease the infill.
https://www.buymeacoffee.com/maxt ---------------------- MALE VERSION: https://www.printables.com/model/334049-christmas-deer-male-freestanding-use-christmas-orn 2mm thick The model will fit on Prusa Mini+ (180x180) Feel free to size it…
About This is a modular, lightweight shelving system I designed and printed for my home office. It is designed to be placed flush up against a wall. I've gone two shelves high without any fixing to the wall however you could go…
Details This is a Wiha screwdriver holder I designed to lock onto a French Cleat on your Ikea Skadis pegboard, or with the push of two buttons, can be removed to stand freely on two legs that fold into the sides. For the pushbuttons I…
Sidestand extension for loose/ muddy ground. Fits on Triumph Scrambler 1200. May fit on other Triumph as well. Screws are M5x8 countersunk head. Print instructions Category: Automotive Summary Sidestand extension for loose/ muddy ground.…
This unique "Welcome" desk sign is a stylish and sustainable way to warmly greet your guests. Crafted from eco-friendly PLA material using 3D printing technology, it’s made with a commitment to preserving natural resources—no trees were…
https://www.buymeacoffee.com/maxt ---------------------- 2mm thick The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as it gives the best…
Deutsch: Einfacher Handyhalter für viele gängige Handy Modelle wie iPhone. Funktioniert im Hochkant-, als auch Querformat Druckeinstellungen Handyhalter Schichthöhe: 0,3mm Wandlinien: 3 Material: PETG / PLA English: Simple phonestand for…
Heartbeat Wall Art - Freestanding Decor is a dual-function decorative model that can be used as wall art or displayed as a freestanding ornament on its stand. Clean lines. One rhythm. One heart. This design turns the universal heartbeat…
Now you can watch youtube videos and tiktoks while eating your breakfast with this practical keychain phonestand!, i've left the longer side blank so you can add some text on it and print it as a gift, you only need supports under the…
As I like to run Youtube videos on my mobile phone during long journeys, I designed a holder for my mobile phone which can be mounted in the cup holder of my car, a Skoda Enyaq. The holder offers enough space for a Pixle 8 in a case.…
This is a model for a simple set of shelves that are great for holding small pocket sized items. I use mine to hold those ubiquitous Bluetooth earbud cases and other small electronics. Each individual shelf is 125mm wide, 70mm deep, and…
Aerial Bomb Lamp, hanging or freestanding (My Take) Design to be printed in 2 pieces and assembled. Assembled dimensions is 19" by 6". NOTE: if this appears tiny in your slicing software, scale it up to 2540%. That should be the correct…
remix of Prusa Mini Freestanding T-Slot Nut by Olivier modified to fit m3 thread inserts instead of m3 nut one can find it more convenient printed with no infill and 3 perimeters out of PLA
Gedruckt mit PLA bei 100% Infill
I had problems with the hinges of the original design but still like the idea. so I came up with different design. V2: improved hinges compared to my first version
https://www.buymeacoffee.com/maxt ---------------------- 2mm thick The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as it gives the best…
Dont like logos or watermarks so i removed them
Nintendo Switch Gamestand for 12 Games to mount onto IKEA SKADIS. Recomend to print the first layers slow to prevent wrapping.
This Build Plate Holder has been especially designed for Creality K1C build plates but can also be used for the Creality K1 build plates or any other build plate with the dimensions of 235 mm x 235 mm like e.g. Ender 3 V3 SE or Ender 5…
Horses Wall Art – Freestanding Decor is a dual-function decorative model that can be used as wall art or displayed as a freestanding ornament on its stand. Features a black silhouette deer with tribal-inspired swirl patterns and fine…
Smartphone holder with port for charge cord. Adjustable with worm-gear. Glue Cradle gear to cradle on assembly. I assembled the stand completely, then added a few drops of CA glue to the cradle gear side.
I was trying to use my Multiboard for a hardware organizer but didn't want to mount it on the wall (yet) and the normal freestanding leg wasn't providing enough stability and it was getting very front heavy. I created two new legs, one…
A stand / holder / organiser for a variety of Dremel bits and accessories. This is a large flat print - watch out for warping (which you can see in my print). I strongly recommend big mouse-ears for the corners when slicing. Take care how…
I modified this freestanding sunglass holder to be taller; holding 5 pairs instead of 4.
very practical phonestand
Hier ein Höhen- und Neigungsverstellbarer Handy- und Tablethalter. Den Knopf zweimal drucken. Es werden zwei M5-Inserts und 2 M5x10 mm Schrauben benötigt. Gedruckt mit PLA, 4 Wandlinien und 25%-50% Infill. Wer den Sockel schwerer möchte,…
Phonestand to hold your phone in three different textures: voronoi, weave and basket. Can fit most phones. Width of the stand 70 mm (can be scaled) Maximum thickness of phone: about 17 mm
Easy to print Super Nintendo gamestand for 6 games. For best result put the seam in the back. I use organic support for the front but it is not especially needed.
SOPORTE PARA RELOJES, MANOMETROS PRESION ACEITE AGUA VOLTAJE UNIVERSALES PARA 52MM
I dont like the original Haibike Sduro sidestand mounting position. The sidestand reaches far behind the rear wheel when lifted up and the bike can easily tip over when standing on the stand because of the inconvenient triangle point.…
For the best stability, i added some double sided tape on it. no support needed.
Printed on Prusa MK3S+ with default 0.2 Prusament PETG settings.
Handyhalter / Smartphonestand
This is a remix from: https://www.printables.com/model/170489-skadis-mini-filament-spool-shelf I have modified the shelf to be freetsanding, also in 3 sizes so that can be displated in a stadium arrangement.
your cupholder can still be used. I added F360 source file if you want to adapt to your phone size.
I was experimenting with features in Inventor and came up with this phone stand. Nothing special, just wanted to share it. My phone keeps falling off, so I added V2 to solve the problem.
UPDATE - Now features 3 alternative roof, body and feet designs. Also a base suitable for an LED tealight style light source has been included, with the option to add the reflector later if necessary. Mix and match the styles of parts,…
A creditcard sized phonestand 85,60 x 53,98 mm adjusted to 85,60 × 54 mm :-) thickness 3.2 mm (A normal credit card is approx. 0.8 mm, so four creditcards thick) Advantages Print-in-place, ready when printed Fits in your creditcard…
Tablestand to Load a Olight Baton 3 with magnetic charger
A horse-themed device stand that allows you to view and charge your while it sits on this nice stand. I kept all the features designed by @JR and simply added the notch for the convenience of charging your device.
Free-standing feet for IKEA Skadis pegboard. Useful for situations where you can't or don't want to attach the pegboard to a tabletop or wall. Print details 0.2mm print layer 0.4mm nozzle PLA (Bambu Lab PLA Matt Grey) 3 walls 10% infill
Celebrate the spirit of this lovable breed with this 2D Westie wall art, featuring the profile of a West Highland Terrier with its paws playfully upfront. This design captures the adorable charm of the Westie, and it’s paired with a…
Lion Wall Art – Freestanding Decor is a dual-function decorative model that can be used as wall art or displayed as a freestanding ornament on its stand. Features a black silhouette lion with tribal-inspired swirl patterns and fine…
English: After setting up the FLSun SR and putting it into operation, I noticed that the filament spool is placed in an unfavorable way and makes the printer very restless. Also, changing the filament was a challenge with the height of…
A self-supporting spoolholder for normal spools with a maximal width of 85 mm. Print Setting recommendation: no supports. 3 shells 8-15 % infill PETG
This sculpture features the traced outline of two dogs in a minimalist, freestanding design. Ideal for home or office decor, it adds a modern artistic touch to any space. Key Features: Minimalist dog outline design Freestanding and stable…
this very simple phonestand can be printed without supports when layed on its side in the slicer. It does what it is supposed to do and doesnt look half bad doing it I hope it helps you and serves you well
This is a tool tray for the feedback sports bike stand. It is 100% printable, no need for threaded inserts It holds at least 1,5kg (With Prusament PETG and the print settings I used) I tested that with a 1.5L Water bottle. I don't know…
This is simple freestanding photo frame in two variants for landscape and portrait photo. Print settings - in brackets settings for the back part: Layer height: 0.2 mm Perimeters: 3 Solid layers - top/bottom: 5 / 5 (4 / 3) Infill: 15%…
Holder for the IKEA wirelesscharger. Print instructions Printed with Prusa Silver at 0,15mm Layer without Support
Simple and elegant phonestand for horizontal and vertical use.
ajustable phonestand with a strong fit. easy print, simple design :)
Created a Phone Stand for watching Movies on the Train etc. Just put the top of your phone in it and adjust the angle to your needs. There is a hole in one side to add the MobiPhoneStand to a keychain. You can get those carabiner hook for…
An simple and elegant, curvy Phonestand/-holder. v1 is thicker, with a width of 10mm. v2 is thinner, with a width of 6mm.
It's an easy print, so not much to explain here I guess :) It may be useful to use a brim! A fun addition is to put your name on it in your slicer software.
Hey, du hast schöne Pokemon Karten und möchtest sie jeden tag sehen, hier die Lösung der Pokemon Karten Ständer auch pokestand genannt hilft dir diesen wünsch zu erfühlen. Hab spass beim drucken peace Hey, you have beautiful Pokemon cards…
Deer Wall Art – Freestanding Decor is a dual-function decorative model that can be used as wall art or displayed as a freestanding ornament on its stand. Features a black silhouette deer with tribal-inspired swirl patterns and fine…
I had left over legs from using the IKEA Lack tables in a different project, so I used them to help create a freestanding filament spool holder. It works very well and is incredibly rigid. The print is universal, so be sure to print 2…
This model features a stylized side profile of a West Highland White Terrier (Westie), beautifully combined with an elegant floral motif, and it’s paired with a convenient holder, allowing you to either hang it on the wall or let it stand…
Yet another Headphone Stand I designed this, because I wanted a Headphone Stand that could be printed in one piece, yet accommodate larger Headphones. It is designed to be printed standing, so I can make use of the available height of the…
Easy to print in Place no Supports I printed it @0.15mm Layerheight
A simple, but perfect fit holder for your Shelly motion. Very practical if you move the sensor around the house for different scenarios. Print with at least 3 perimeters and 0 (zero) infill. *For private use only. If you think that is a…
I uploaded this from the model I created and published on MakerWorld: https://makerworld.com/en/models/893600#profileId-850862 PRO TIP: Wait a few minutes after printing before removing your sign from the bed (this helps prevent bending…
Requires 8/m3x10mm (or longer). The back plate that buts up against the front plate is optional. I have it there because I wanted to be able to put some shorter tools that don't reach the back plate. Screwdriver models credit: Michael…
Hello everyone. I am often at conventions and use IKEA Pegboards to showcase multiple products. As the tables vary in size, I needed a stand, that isn't mounted on the table itself, but just stands there. The V1 used screws to mount the…
A simple but effective freestanding 3D F2 logo. The logo is designed with a discrete backing to keep the lettering upright and spaced. The backing also means no base is needed as the logo is self supported. Perfect as a home decoration or…
This holder is designed to hold a Oneplus 11 horizontally without the tabs getting in the way of the time-scrollbar.
This is a collection of parts to make a guitar stand/wall hook out of freestanding timber. This print requires a significant amount of other material. The original idea behind this model was to avoid screwing into masonry walls. However,…
PHONESTAND The stand can hold the phone upright or laying down. The tray is perfect for storing rings, earings, etc when going to bed
Parts to build a freestanding desk shelf
A freestanding screw driver stand for six small screw drivers with octagon shafts. Works well for a screwdriver shaft between 7-8mm. The design also has provisions for magnets 20mm L x 5.75mm W. Legs are tapered and fit snugly into the…
My daugther like rodrigo model for her tablet but wanted a smaller design for her cellphone. I simply used Thinkercard to remove the inner hollowed section, keeping all other property of this nice design.
![Cupholder Phonestand [parametric, Skoda Fabia 3]](https://media.printables.com/media/prints/746534/images/5831109_8b5f4ca7-795f-41fb-bb6a-34c044498377_950b57a2-b0ba-4a87-9f7a-c5ccb1fcd9cb/20240201_142722_1706794125338.jpg)
