Counting matching models…
Fiber optic spool holder with racetrack to manage extra fiber. I used this to extend my ISP's fiber and couple it into extra fiber in my house. Has a spot for a panel mount coupler as well. Print it on the bottom face and let the back…
Brands Hatch, Fawkham, United Kingdom, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in…
Made a small 1x1 Gridfnity storage for my UGREEN FineTrack Smart Finder. Designed it so that i can find it the next time
I have designed the objec customizable. I can change imediatly for a bigger 8 or a steel balls of a different size. The steel ball can only be insertet (or fall out) in the center!
3D model of the Jeddah race track One model is just the track, the second one is with the name of the track. width: 6mm height: 10mm
Build your marbletrack by yourselve! Several parts to have fun with marbles. Build your track with this parts and Lego or similar bricks. The marbletrack is for marbles from 5-10mm. The curved parts are all in clockwise direction. If you…
3D model of the Miami racetrack One model is just the track, the second one is with the name of the track. width: 6mm height: 10mm
Quest 3 eye tracker compatible with VR Optiker prescription lenses. It clicks into the headset without tools, and the lenses snap securely into the adapter.
Introduction The racetrack tuner is a capacitive coupler for short transmitting loop antennas. The name is refering to its racetrack form. Racetrack Circus Maximus in Rome - maybe I should call it ’Maximus Tuner’ :-) For use by certified…
I designed a marbletrack which floats in a frame. The marbletrack is for 8mm steel balls, smaller ones should also work. Print the file in orientation like the 3D-model is made with 0.2mm layer hight without support. I printet mine with…
This is the core set of my new toy car city road system. It is meant to replace my much older, outdated road system. It features push fit connectors, which allow every road segment to connect in pretty much any way you want. I was…
General Three different mounting alternatives for Racetrack Tuner . Features Add structural strength to Tuner. Mounting alternatives Circular (Broomstick ) Rectangular (Wood) Frontpanel, protecting the knobs Build Print 2 pcs screws with…
You may need to heat up the camera mounts so you can bend it to make the camera fit easier. A little late to mention but the camera mounts fit my 160 FOV cameras, its a tight fit, I'm not sure of the compatibility with 130 FOV cameras.
Introduction The racetrack tuner is a capacitive coupler for short transmitting loop antennas. The name is refering to its racetrack form. Racetrack Circus Maximus in Rome - maybe I should call it ’Maximus Tuner’ :-) For use by certified…
Made a small 1x1 Gridfnity storage for my UGREEN FineTrack Smart Finder. Designed it so that i can find it the next time
wanted to use this model for a wall of bookshelf + hotwheels display for a kindergartener
All the circuits are displayed. The model is in red, white and back.
Snetterton Circuit, located in Norfolk, UK, is a major motorsport venue known for its 2.97-mile "300" layout, which combines fast straights with a technical infield . It is an FIA Grade 2 circuit hosting BTCC, BSB, and British GT…
That's one big piece of gum! A modified version of Phys' All-In-One USB dongle that uses an Adafruit CH334F Mini 4-Port USB hub breakout instead of the original disassembled USB hub the project originally calls for, making it easier to…
The Autódromo José Carlos Pace (Interlagos Circuit) , located in the southern zone of São Paulo, is the main motorsport circuit in Latin America and the venue of the São Paulo Formula 1 Grand Prix. Inaugurated in 1940, the current layout…
The Autodromo Nazionale Monza , built in 1922 and located near Milan, Italy, is known as the “Temple of Speed” due to its long straights. With a length of 5.793 km , it is one of the fastest tracks in Formula 1, where drivers spend about…
UPDATE 09/2024 Add new version V8 for G93SC and G93SD with monitor clip. You can clip this version to your monitor without additional tape. Would be nice to get feedback for G95SC. Add new version V5 to fit G95SC. Description This is my…
This is a simple DIY freetrack/ trackIr headset. It is made to use an action cam battery, mine is 33x30 mm from a cheap action cam and 5mm ir leds. The battery connector was bought in aliexpress:…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** I developed and tested the STRONG and EVEN STRONGER…
3D model of the Imola race track One model is just the track, the second one is with the name of the track. width: 6mm height: 10mm
3D model of the Misano racetrack One model is just the track, the second one is with the name of the track. width: 6mm height: 10mm
3D model of the Monza race track One model is just the track, the second one is with the name of the track. width: 6mm height: 10mm
3D model of the Mugello race track One model is just the track, the second one is with the name of the track. width: 6mm height: 10mm
3D model of the Bahrain race track One model is just the track, the second one is with the name of the track. width: 6mm height: 10mm
3D model of the Zandvoort race track One model is just the track, the second one is with the name of the track. width: 6mm height: 10mm
3D model of the Albert Park race track One model is just the track, the second one is with the name of the track. width: 6mm height: 10mm
3D model of the Suzuka race track One model is just the track, the second one is with the name of the track. width: 6mm height: 10mm
3D model of the Shanghai racetrack One model is just the track, the second one is with the name of the track. width: 6mm height: 10mm
3D model of the Monaco racetrack One model is just the track, the second one is with the name of the track. width: 6mm height: 10mm
Made for those wall arts in frames. An example of use is shown in the last picture, that is NOT mine. Made, by creating an SVG and then extruding it.
Mantinely na autodráhu. Curbs on the racetrack.
You may need to heat up the camera mounts so you can bend it to make the camera fit easier. A little late to mention but the camera mounts fit my 160 FOV cameras, its a tight fit, I'm not sure of the compatibility with 130 FOV cameras.
Edited so the usb-c cable that powers it goes out straight instead of outwards. Also now has a window so you can have a heatsink on it.
Inspired by the collection of F1 tracks , this is a model of the Padborg Park race track for hanging up on your wall.
I did my first track day a few months ago at Streets of Willow and wanted to put up some wall art, was surprised I couldn't find any. I took a screenshot on Google Maps and traced it, no elevation. Enjoy
Podpěra pro zvýšení trati autodráhy. Kvůli snadnějšímu tisku je zvlášť na několik dílů. Není to na časté rozkládání, jeden prodlužovací kus se mi podařilo rozlomit, takže spíš složit a nechat být :-) Můj teprve druhý model. A support for…
wanted to use this model for a wall of bookshelf + hotwheels display for a kindergartener
This is a cap style point model for use with OpenTrack, FreeTrack, or FaceTrackNoIR. It is designed for external power, either via USB or a battery pack. Check out the Serial Build guide on the FreeTrack forums here:…
A time tracker for D100 Dungeon to save the printed one from wearing out so fast, and this also saves me a few seconds each turn. I use two pegs to track time, like on a cribbage board, so I don't lose track of my current position as I…
This is a specially designed face tracker that uses an ESP32-CAM module and requires no glue or modifications to the headset itself. It only needs a single M3 screw as a swivel point. The mount simply clicks into place and does not block…
A face tracker mounting clip with an attached mount for a full body tracking system called Fluxpose
The Curbs are made for cable duct in size 30x15 mm. You have to drill a 10mm hole in the cable duct, to hold it in place.
Ich bin im Seifenkistenverband Baden-württemberg e. V. aktiv. Hier haben wir eine Rennklasse, die nennen wir Mini Seifenkisten Racer. Kurz: MiniSKR. Dazu gibt es auch eine Internetseite: www.miniskr.de www.seifenkistenverband-bw.de In den…
Nurburgring Nordschleife, Nurburg, Germany, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in…
All the circuits are displayed. The model is in red, white and back.
Sebring International Raceway, USA, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in different…
Fuji International Speedway, Oyama, Japan, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in…
Velocitta Raceway is a high-standard motorsport complex located in Mogi Guaçu, in the countryside of São Paulo. Opened in 2012, the circuit is homologated by the FIA and the CBA, and is recognized for its modern infrastructure integrated…
Circuit Zolder is a historic 4.011 km (2.49-mile) motorsport racetrack in Heusden-Zolder, Belgium , featuring 14 challenging turns and a, technical, high-downforce layout. Known for hosting 10 Formula 1 Belgian Grands Prix (1973–1984), it…
A simple DIY LED holder for head tracking, designed for 5mm LEDs. The first iteration (pictured) was designed with the option to mount LEDs on Dupont connectors so that they could be easily replaced. This, however, proved troublesome to…
Snetterton Circuit, located in Norfolk, UK, is a major motorsport venue known for its 2.97-mile "300" layout, which combines fast straights with a technical infield . It is an FIA Grade 2 circuit hosting BTCC, BSB, and British GT…
Twin Ring Motegi, Japan, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in different color…
That's one big piece of gum! A modified version of Phys' All-In-One USB dongle that uses an Adafruit CH334F Mini 4-Port USB hub breakout instead of the original disassembled USB hub the project originally calls for, making it easier to…
The Autódromo José Carlos Pace (Interlagos Circuit) , located in the southern zone of São Paulo, is the main motorsport circuit in Latin America and the venue of the São Paulo Formula 1 Grand Prix. Inaugurated in 1940, the current layout…
The Autodromo Nazionale Monza , built in 1922 and located near Milan, Italy, is known as the “Temple of Speed” due to its long straights. With a length of 5.793 km , it is one of the fastest tracks in Formula 1, where drivers spend about…
Separate to left and right eye mount for ease of uploading to online 3D printing services.
Laguna Seca Speedway, Monterey, USA, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in different…
Daytona International Speedway, USA, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in different…
Enclosure for Ugreen Finetrack G (Rechargable) mounted under a bottlecage Ideally printed in ASA Filament for UV resistance (ASA > PET > PETG > Everything else) This requires a longer M5 x 25mm bolt to be mounted properly Additonal Tip:…
Road America Circuit ,Elkhart Lake, Wisconsin, USA, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts…
Mount Panorama Circuit, Bathurst, Australia, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in…
Masarykův Okruh, Brno, Czech Republic, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in…
Pista di Fiorano, Italy, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in different color…
Circuito Ascari, Málaga, Spain, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in different…
Goodwood Circuit, United Kingdom, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in different…
Accessory plate to hold a UGREEN FineTrack tracking tag onto your Ridge Wallet. ***This design allows you to reuse the original plate screws!*** Just unscrew the screws from the face plate, lay the tracker plate onto the original plate,…
Autodromo dell'Umbria, Italy, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in different color…
EDIT: I got a request for another racetrack, so I added WATKINS GLEN. I was thinking about re-decorating my apartment - spicing-up these old cupboards and lockers or some new pictures on the wall. As I am a huge motorsports fan it might…
Printed in two parts and then glued together with two component glue. STL only left side model. Made in Blender 3.2 with CAD sketcher: https://makertales.gumroad.com/l/CADsketcher
Thunderhill Raceway Park, Willows, USA, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in…
Tsukuba Circuit, Shimotsuma, Japan, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in different…
Sonoma Raceway, Sears Point, United States, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in…
Road Atlanta, Braselton, United States, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in…
Watkins Glen, Dix, United States, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in different…
Long Beach Street Circuit, USA on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in different color…
Frame for weather/tide tracker using an e-ink display Project Link: https://www.hackster.io/ssbaker/e-ink-tide-and-weather-tracker-21447b Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: Yes Resolution: 0.15 Infill:…
Update 7.02.2023: Added Pre-Build Bridges and a Hexgon Plate. You can extend them with any other element using the top/bottom clips. This spacer (grid)element has several advantages. The Hexagon connector is very tight and holds firmly on…
Frame for weather/tide tracker using an e-ink display Project Link: https://www.samsworkbench.com/e-ink-tide-and-weather-tracker/ Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: Yes Resolution: 0.15 Infill: 15…
The spiral is modular . That means that there is a minimum set of required parts, and a few optional parts to increase the height, change the marble inlet, add stabilizer pillars etc. Marbles cannot fall out of the Spiral - no matter how…
I was commissioned to make this model for PGP Motorsports park and 3D-print a few hundred as promotional giveaways. Print in PETG or TPU to make a reasonably robust keychain trinket. I do not recommend ABS or PLA as they are too stiff
Link to toy: https://www.amazon.com/Palotix-Dinosaur-170PCS-Christmas-Birthday/dp/B08HZ6W83X/ There are many similar versions on amazon, but they should all fit. Just heat up the axle with a lighter to ensure a tight fit and put a dab of…
My setup: 3x5 mm IR transmitting LED Power supply voltage: 5 V LED voltage drop: 1.3 V LED current: 50 mA 22 Ohm resistor Assembly guide: Print a model Do some calculations. Using this LED array calculator I found that my setup requires a…
Ich habe mir hier ein ein Paar Untersetzer für Gläser oder Tassen mit Rennstrecken Konstruiert (Nürburgring Nordschleife, Zandvoort , Spa , RedBull Ring , Circuit de Catalunya , Le Mans , Imola , Monza) ------------------- I've designed a…
I designed this test print in order to check input shaping and accelerations with Klipper Tuning Tower command. Also have fun watching your printer running around this famous circuit. UPDATE 23/08/2023 ADD VERSION WITH 5MM MARKS IN ORDER…
bracket for tobii eyetracker 5 use with the extra magnet. this is to mount to a screen bracket from a sim racing screen
Print with support, with the axis of the round hole as Z axis. PETG is advised.
Saw lots of single versions of wall mount race track connectors and thought there needs to be a double. So I whipped one up. This is done in PETG, 100% infill at .3mm layer hieght using a .6 nozzle. Speed at 35mm/s. Nozzle at 245 degrees…
UPDATE 09/2024 Add new version V8 for G93SC and G93SD with monitor clip. You can clip this version to your monitor without additional tape. Would be nice to get feedback for G95SC. Add new version V5 to fit G95SC. Description This is my…
Custom solution for a clean, unobtrusive, EyeTrackVR installation in the Valve Index . Project includes: Custom, highly iterated camera and LED mounts based on bitbyt3r's design. These revisions alone may be preferable to some. All-in-one…
Las Vegas Strip Circuit, Nevada, USA, on a stand with it's name. Looks best when separate parts printed in different color filament. If you appreciate my work please consider donating me on Ko-fi . If you have some requests for new…
![#0161 STRONG #8 Racetrack Double Split Key Ring [3 sizes] - Meets the Demands of Everyday Use!](https://media.printables.com/media/prints/882189/images/6978605_0d7baa1d-6198-4119-97c0-24ae7e11ad5c_795317cf-4c65-4771-8c57-787a2aa39eab/20240615_162825.jpg)
