52 models
Eurocopter AS365N3+ Dauphin Helicopter Wall Art Silhouette Model. Adjustable size. I accept model suggestions.
Print approx. €0.88–€1.08 excl. taxPreliminary estimate for one variant
Model: Airbus Eurocopter EC-135T2 helicopter !!!MODEL BUDE OPRAVEN DO 30.9.2024 MOMENTÁLNĚ NA TOM PRACUJI!! !!!THE MODEL WILL BE REPAIRED BY 9/30/2024 I AM WORKING ON IT CURRENTLY!!! English: Czech: Print Settings Printer brand: Elegoo…
Here is my take on a common medical device seen on Voyager. It was used as a portable brain systems monitor the patient could wear that would not hinder their regular activity. I used supports on the cover part, but if you prefer you can…
Wallart of EC135 helicopter, scaled to fit MK3s bed, also included original STL (1m long)
Large version of my EC135 wallart , precut and scaled to fit on MK3s, also inluded is original sized file (1m long). Prints easily, glue with superglue and display (I am using poster gum to mount on the wall)
The Eurocopter EC135 , now known as the Airbus Helicopters H135, is a twin-engine light utility helicopter renowned for its versatility and advanced design. Introduced in 1996, it features a quiet Fenestron tail rotor, making it ideal for…
A cylinder dummy that was mandatory for a door in a fire escape section had the price of 10€, this part is a lot cheaper. In Germany, the fire brigade wants to see this in locks of doors that must not be locked because they are on an…
made for the following: https://www.printables.com/model/1251061-corsi-rosenthal-air-filter-140mm-pc-fans-16x20x1-f noctua says this is better used as intake, but having no problems with putting it on the exhaust side. there is slight…
Vend candy dispenser 20 eurocent coin plate
Works great and tested with: 2 version. One with hole for screw with cone point and one without hole. Tested with PLA, CPEHG100, PETG If you print from PLA, I recommend version withoud hole. 0,15mm layer height 3 perimeters 100% infill
The Eurocopter EC145 is a twin-engine light utility helicopter designed for versatility, safety, and reliability. Developed by Eurocopter (now part of Airbus Helicopters), it first flew in 1999 and quickly became popular worldwide. The…
This is a set of models to create a custom rack for an Eurocard system with backplane. The basis is a single board guide, attached to the back plane with mounting parts. The Board Guide parts should be more or less the same for all…
It looks like milk crates, but it’s the right size for eurorack modular synths. Please hit like and download!
This thing allows one to combine a Make Noise 104HP skiff with an Intellijel 104HP/7U performance case without destructively modifying either case. Simply replace the Make Noise side panels with the ones included in this thing, then slide…
This design was created to allow an office internal door to be permanently locked, with a neat and simple blank printed in a similar colour to the existing door furniture. No changes were made to the door - the original Eurolock cylinder…
Print in place no screws make sure it fits your cans and pull the can strait out don't bend it up i press my thumbs in the front of the holder. Perfect for rattle cans so you don't get paint on your hands.
Der Eurocopter Tiger Kampfhubschrauber als „2,5“ D Modell, die Basis ist 3mm dick. Der Standfuß ist aus Holz gefertigt, es wurden 3mm breite und 15mm tiefe Nuten hinein gesägt. Die Breite und Tiefe des Fußes kann natürlich beliebig…
Description Tubus case for eurocard PCBs 100mm x 80mm x 1,6mm. 3 different slot for hight adjustment. The top and bottom covers panels are without any outbreaks because it varies depending on the application. M2,5 thread can be cutted to…
A jig for knocking out the plugs in the pin chambers of Eurocylinder locks. Use a 3mm rod or bolt of whatever length will fit in your vise—or you can hammer on it, though I prefer the vise.
Ich habe den Eurocopter 135 selbst Design. Ich hoffe er gefällt euch. Ich werde die Version selbst testen. Vorerst habe ich nur diese Version schon einmal bereit gestellt. Ich würde mich freuen wenn schnelle eine Make erstellt, und ein…
This is a hand grip for a eurocylinder. It is made for the Multipick training cylinders which are cutaway locks.
Hey, tired of your Euro coins scattered all over the place? Then you need this awesome coin collector! Each Euro coin denomination (1, 2, 5, 10, 20, 50 cents, and of course the 1 and 2 euro coins) has its own cool compartment. This way,…
Enclosed 3mf is preset for MMU, use STL for non-MMU print - just add the manual color change at 1.6mm height.
Eurocell CR8207 conservatory gutter bracket. This item is discontinued hope it helps I have made it a bit stronger than in the pics
Just a frame, with which you can protect your soldered pcb with a shield. -- I also added STLs for the commonly used sizes (15mm height): euro full (160x100) euro half (80x100) euro quarter (80*50) For a recent project i took 2 full…
Allows a wide-slat Venetian blind behind the door handle, with space for fingers too. Some new door hardware is required, including a lock - refer to image. Print it good and sturdy with thick walls; 30% infill recommended. I primed and…
With this adapter it is possible to attach a funnel to the WS4003 anemometer. I have designed this funnel adapter to measure my air conditioning system at home. The adapter can be printed easily without support and with snappers not…
We have a lockable container with eurolock barrels, but sand gets into the keyholes. Covers for standard eurolock barrels exist, however these lock barrels are larger with cast iron anti-drill shields. This is a parametrised openSCAD…
The Eurochron EFBU811 radio controlled clock from Conrad Electronic is usually attached to smooth surfaces with a suction cup on its backside. The plastic screw broke so I decided to make a self standing housing. The clock can be just…
Eurocopter MH-65 Dolphin Wall Art silhouette model. Adjustable size. I accept model suggestions. If you enjoy my work, you can support me with a small contribution ☕ It really helps me keep creating and bringing everyone’s ideas to life:…
Wenn am Camper, z.B. Ducato, ein EuroCarry Fahrradträger 66401 befestigt ist, dann werden die hinteren Fenster mangels Öffnungswinkel nicht mehr von der Gasdruckfeder gehalten. Mit diesem Klemmring können die Fenster am Fahrradträger…
The ABS covers on the hinges of the French windows in my home have discoloured over a few years (which one might expect for ABS in the open air subject to the UV from the sun's rays!). Having made enquiries about replacements, I…
These euro chips are simple and fast to print. They are particularly suitable as a small gift as they contain a message. Jesus.stl: The Christian symbol of the cross Fish.stl: The fish was a Christian symbol of the first communities…
Box for the socket IEC C14 for the glue-on heaters for cylindroconical fermenter Brewmonk 30l. - Two-part flexible polyurethane glue seem to hold well on both the stainless steel and plastic
No springs no nothing, just gravity…
This is a simple cover plate (escutcheon) for a eurocylinder gate lock with a small handle to close it when locking. The FreeCAD design is included for modifications - or just mirror it in your slicer.
Since the original ripped after 21 years of daily use, I made one. Hopefully It'll last another 21 years :D It should fit in the originals place. These key fobs were originally packed with EuroCar car alarm systems in the 2000s, I have…
This is a mounting bracket for the Eurochron EFWS 2900 weather station. This model fits most 32 mm mounting pipe.
For this case u need to Solder main voltage connections! If u do not feel like doing this, u may should use a extension for the PSU mains connection. If u want to use an extension, u can contact me and i try to add a 3D model do integrate…
Supports for better PCB support. press four 12mm magnets into base
Print in place no screws make sure it fits your cans and pull the can strait out don't bend it up i press my thumbs in the front of the holder. Perfect for rattle cans so you don't get paint on your hands.
The Eurocopter EC145 is a twin-engine light utility helicopter designed for versatility, safety, and reliability. Developed by Eurocopter (now part of Airbus Helicopters), it first flew in 1999 and quickly became popular worldwide. The…
Eurocell CR8207 conservatory gutter bracket. This item is discontinued hope it helps I have made it a bit stronger than in the pics
Ich habe auf der Rückseite zusätzlich die Jahreszahl 1mm tief eingeprägt. Die Münze sitzt sehr straff. Ein kleiner Hammerschlag hilft beim einsetzen 😀
Prints in around 7 mins. While the original is press fit, this replacement has shorter guide prongs and is intended to be attached with a few small dots of glue or silicone. I used the default print settings, but if you want to cut it to…
We have a lockable container with eurolock barrels, but sand gets into the keyholes. Covers for standard eurolock barrels exist, however these lock barrels are larger with cast iron anti-drill shields. This is a parametrised openSCAD…
This design was created to allow an office internal door to be permanently locked, with a neat and simple blank printed in a similar colour to the existing door furniture. No changes were made to the door - the original Eurolock cylinder…
