Counting matching models…
This is a modified cable chain end mount for the Ender 3 V2, allowing the chains to be mounted so they run nicely parallel to each other and the printer. I've also added all the other bits you need to print a cable chain for the Ender 3…
New Hips! These are better: https://www.printables.com/model/954477-dummy-13-improved-hips Edit: Replaced entryPlug, Kata, Blade, Tri in the armor part, very minor changes so less glue required. Added frame-head because I forgot to upload…
New Hips! These are better: https://www.printables.com/model/954477-dummy-13-improved-hips/files Horn assembly - Horn goes in from the bottom. Chest assembly, middle front plate goes in first. Super glue is your friend. Original pieces…
Gidday Andrew, Thankyou for providing the back of the mask. I did my best and got all the way to revision 17 of my test trials before I was finally satisfied I'd done all I could do to get it to look remotely close to having been…
New Hips! These are better: https://www.printables.com/model/954477-dummy-13-improved-hips/files Edit: Added color separated plates for remake color scheme. Paint apps: head - yellow, white, black, green for details. chest - yellow, black…
LANCE OF LONGINUS IN EVANGELION Category: Toy & Game Accessories
Here's my attempt at Darth Revan's Mask from SWTOR. I scaled it up to 300%, and that fit my face. Just use some superglue to glue the halves together. Here’s my assembly and painting video for this, https://youtu.be/YvHHiLG0oF0 . Be sure…
New Hips! These are better: https://www.printables.com/model/954477-dummy-13-improved-hips/files Edit: Added articulated Jaw. Assemble the jaw before putting in the frame piece for the head. adding onto EVA-00. Head extracted from…
I really love this Evangelion Unit 01 bust I came across on thingiverse, made by JN_Designs. It prints really well at 500% in its original orientation with slim tree supports. I used 12% infill and 3 walls to avoid infill showing through…
Hair clip/plugsuit head input for Rei Ayanami from Neon Genesis Evangelion, I based it on figurines of her. Shinji Ikari uses the same ones I believe. There's a second version which I sliced a curve of the bottom in case you want to wear…
Here is my attempt at designing Revan's main lightsaber. Refer to the diagram for assembly guidance. Note about the Bar Halves and Blades - the halves have a connector piece that can help align them. The moving emitter blades can be…
This collapsing lightsaber is designed to be printed as one part. The multi-part replaceable blade version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how…
—— QA: Q: Why did i make all models free? A: The simple reason is Copyright issues. I am not allowed to make any money on Copyrighted material. ——— Q: Who made all the models? A: The models are made by several people, including myself. I…
llavero inspirado en la serie de anime Neon Genesis Evangelión El llavero tiene el logo de la compañia NERV y de la unidad EVA 01 presentada en el anime
Printed on a Creality Ender 3 S1 0.4mm Nozzle PLA Filament Make sure to use spacebar and bottom row keys that fit your keyboard. I have marked the ones for a 6.25u spacebar and accompanying 1.25 and fn keys. This was specifically designed…
Hair plug for Asuka from Neon Genesis Evangelion. I based it on figurines of Asuka and made two versions: one with a more rounded top and one with a bit more pointy top. I've included the Fusion360 file so feel free to alter the design or…
Last Update: 8/28/2023 Update - Currently working on a V2 of the toolhead Current Issues - Nothing to report as of now Updates - Updated V2 ducts improve cooling if you are experiencing any cooling issues, please reach out so I can solve…
There are two versions of the mainbody. One for fdm printers and one for resin printers. The fdm version has no visible cockpits! Pilots and decals are not included. For the display/stand you will need to drill a hole in the mainbody and…
Last Update: 10/21/23 Current Issues - Fixed the belt plate (added heat set inserts that were supposed to be added. Carriage Compatibility MGN12(H/C) MGN9(H/C) Hot End Compatibility Rapido HF & UHF Dragon HF & UHF Dragonfly BMO Revo Voron…
Optimized for single color printers. You will need: - 2x M4 screws (14 mm) - 2x M4 nuts - Superglue (optional but recommended) Assembly video Check out my new EVA Unit 02:…
Design Concept This 3D model is inspired by the character Asuka from the Evangelion series, capturing the essence of her dynamic and bold personality. Purpose It is intended for collectors, fans of the series, and hobbyists who appreciate…
The Evangelion 01 from anime Evangelion
Another (re)mix of CaseStudyno8s (https://www.thingiverse.com/thing:1735267) and 3DPRINTINGWORLD (https://www.thingiverse.com/thing:3606120)s designs to create my own Darth Revan's collapsing lightsaber. So I remodeled the whole thing to…
Last Update: 9/23/2023 Update - Currently working on a V2 of the toolhead. WIP - Still working on the front shroud design that's pictured. Current Issues - Nothing report as of now. Recent Changes/Updates: Updated V2 ducts improve cooling…
Here's my second attempt at Darth Revan's Mask from SWTOR. Scale the files up 200% for full size. Be sure to post make and check out my other models! Category: Props
Altura Recomendada 150mm Diseño conceptual Esta es una figura de estilo urbano inspirada en el personaje Rei Ayanami de Evangelion. La pose y vestimenta reflejan un enfoque moderno y dinámico que aporta a la figura un atractivo visual…
Altura Recomendada 150mm Diseño El diseño de este modelo es detallado y busca capturar el estilo colegial moderno de Rei Ayanami. La pose dinámica y el cabello en movimiento añaden vida y energía al modelo. Uso Este modelo es ideal para…
Altura Recomendada 150mm Concepto del diseño Una figura modelada de Asuka de Evangelion en atuendo casual, ideal para fanáticos del anime y la cultura pop. Uso Decoración de escritorio para entusiastas del anime y coleccionistas de…
Altura Recomendada 150mm Diseño Este modelo 3D representa a Asuka con minifalda, un personaje icónico de Evangelion, capturando detalles y carisma específicos de su apariencia. Uso Ideal para coleccionistas de figuras de anime y para…
Altura Recomendada 150mm Concepto de Diseño La figura de Asuka está diseñada meticulosamente para capturar su icónico estilo colegial del anime Evangelion, utilizando detalles precisos en la vestimenta y la postura que transmiten su…
Another (re)mix of CaseStudyno8s (https://www.thingiverse.com/thing:1735267) and 3DPRINTINGWORLD (https://www.thingiverse.com/thing:3606120)s designs to create my own Darth Revan's collapsing lightsaber. So I remodeled the whole thing to…
Diseño del modelo El diseño de este modelo 3D está inspirado en el personaje de Evangelion llamado 'Rei', con un traje táctico que resalta los detalles de su figura. Se ha cuidado la anatomía y los detalles, lo que lo convierte en una…
I haven't actually assembled this, so good luck on that part! The pieces labeled “DH” (Dowel Hole) have a 9mm hole through the middle so a dowel can be added for support and to connect the 4 pieces together.
0.2 mm de capa, 35% de relleno, 3 paredes Material petg, preferible añadir balsa ya que se puede despegar las aspas.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Swap Instructions: Start with Pitch Black At layer #8 (0.72mm) swap to Red At layer #14 (1.2mm) swap to Yellow At layer #17 (1.44mm) swap to White for the…
Altura Recomendada 150mm Concepto de diseño Este modelo 3D está inspirado en Misato de Evangelion, un personaje icónico en el mundo del anime. La armónica fusión de colores y detalles hacen que el modelo sea una excelente representación…
The lightsabers of the legendary Jedi and Sith Lord, Revan! This includes both designs from Knights of the Old Republic and from The Old Republic. Each saber is labeled "TOR" and "KotOR" respectively. Be sure to print 4 of the Emitter…
Inspired by the attached artwork! Full sized with a slot for a 10mm support rod. Split for a 225mm high printer Not for commercial use Update: Handle2 added (whoops). Correct spelling of name in title :/ Dang you autocorrect.... Artwork…
Reva, the Third Sister's, lightsaber as seen in the Obi-Wan Kenobi show. Can be split in the middle to become two halves (as seen in Part V). 292.4 mm x 145.69 mm x 34.92 mm, assembled. 32 mm nominal hilt diameter.
This is a replica of the progressive knife used by Evangelion Unit-01 which is sized to fit in an adult hand and is intended for prop, cosplay or display purposes. Due to its intended accuracy this may be harder to print than other…
Este Funko Pop inspirado en la icónica serie Neon Genesis Evangelion es imprescindible para los fans del anime. Representa a uno de los personajes clave o unidades EVA con detalles fieles al estilo original de la serie, desde su traje…
Since I've gotten some many requests to make this, here's my attempt at Darth revan's jedi lightsaber. I actually scaled the files this time so it should be size accurate, though it might not fit on a small printer unless printed at an…
Bring a piece of iconic anime history with you wherever you go with this highly detailed EVA 01 keychain from Neon Genesis Evangelion. Perfect for fans of the legendary anime, this keychain features the distinctive EVA 01 that represents…
After watching Castlevania Nocturne, and then rewatching the first 4 seasons of the magnificence that is Netflix's Castlevania, I went to print off a belmont family plaque to have on my wall, only to find there really weren't any? which…
Bust of Darth Revan Knights of the Old Republic.
A spinning version of the cross/boomerang sub-weapon in the Netflix Castlevania show. The blades rotate, emulating the impossible movement seen in the show (no really the secondary set of blades appears out of thin air when all 4 blades…
NERV Emblem Features: - strog chain mount - flat and extruded version - high details (mainly leaf, it has not smoothed corners) --- Commercial Use --- By purchasing this design on Cults , you support my work and receive a commercial…
This is a model of the chain whip from castlevania. It scales decently with 6 inch figures but I wouldn't force it into any figure's hands. It should print with supports and work perfectly. The file labelled “optimised” is at an angle to…
This model is of Seele monolith 01 from the Evangelion Rebuild series, as depicted below. Caution This is a work in progress and may be hard to print around the Seele logo at the top. You will need a small nozzle, 0.2mm ideally. Please…
Shinji Ikari Mech keychain From neon genesis evangelion
This is a polygon modelled object, you can use it for make your own adapter or modify.
Wall Art of the entity of Seele from Neon Genesis Evangelion. This print profile includes multiple variations of the Seele logo from the original series to the red and black interpretation seen in the rebuilds. This print is close to the…
easy to print model made of evangelion, and if your machine support it, also you can print it in two colors¡¡¡
I'd always meant to come back to my early models and heres one with a personal twist on it. Very organic looking piece with no real reference to anything in particular apart from the original file. So should be relatively unique ; )…
Bring a piece of iconic anime history with you wherever you go with this highly detailed NERV logo keychain from Neon Genesis Evangelion. Perfect for fans of the legendary anime, this keychain features the distinctive NERV emblem that…
Castlevania Dracula. You can go to https://www.patreon.com/Schlossbauer if you want earlier access our to sell my work. Category: Toys & Games
Vom Fan für Fans! Ein trendiger Aufsteller der 90er Serie Neon Genesis Evangelion! Stell es auf den Schreibtisch, in eine Vitrine oder verschenke es an einen Fan! Optimiert für AMS, es werden drei Farben benötigt. Nicht vergessen:…
Forgemaster Isaac's Knife - Netflix Castlevania Seasons 1-4 Forgemaster Isaac's knife used to create night creatures, first for Dracula, and then for his own story. Also, used as primary offensive weapon to attack and defend against…
Just a simple model for a necklace charm of my 2 favorite bands. Logo designed and created by me. Still a work in progress. May need to be resized depending on newds.
This is a headphone stand with Revan from Star Wars, it's a model that is fun and powerful at the same time. This headphone stand comes in 2 parts, the actual stand with the figure and then the headphones holder to slide onto it and can…
Neon Genesis Evangelion Decor
I do comprehensive 3D scanning and you can see some of my results here. The models are partially edited with AI due to small or missing details. If you are interested in my work and have a specific interest, you can write to me and my…
For Neon Genesis Evangelion fans, this 3D-printed bookmark featuring the iconic NERV logo is the perfect accessory to accompany your reading. Inspired by the secretive organization from the series, this design blends simplicity with…
Castlevania Dracula Second Form. You can go to https://www.patreon.com/Schlossbauer if you want earlier access our to sell my work. Category: Toys & Games
Newer version, with modifications 80mm long version for LMShow
Forgemaster Hector's Hammer- Netflix Castlevania Season 4 Forgemaster Hector's hammer used to create night creatures under control of the Styrian Council. HammerHead x 1 HammerNeck x 1 HammerMiddle x 2 HammerEnd x 1 Pieces slot into 1/2"…
Source: https://www.models-resource.com/psp/evangelionshingekijoban3ndimpact/model/19230/ & https://www.models-resource.
Infinite Corridor Key - Netflix Castlevania Season 4 The key, charged with many deaths, used to access the infinite corridor and to power up*redacted. After being gifted this apparatus, St. Germain keeps it on a cord hung around his neck.…
Altura de capa recomendada: 0.2mm o 0.16mm 3 perimetros o 100% de relleno
Good morning, Welcome to my profile, full of models and miniatures :-) I have the Evangelical Cathedral in Berlin for you to diorama, or just for fun. A very well-made building. It is suitable for coloring. My children absolutely love it…
The Haladie / Boomerang from Netflix's Castlevania. Trevor Belmont uses this to stab and dispose of night creatures at melee range. This is my stationary version. Both the 2 and 4 bladed versions seen in the show can be assembled…
Hey ! This is a beautiful Castlevania Bookmark with Hueforge ! I use four color with the AMS with my Bambulab P1S : 0.08mm First black until layer 8 - (0-7) Swap to dark red until layer 13 - (8-12) Swap to red until layer 20 - (13-19) Ans…
Castlevania Scylla You can go to https://www.patreon.com/Schlossbauer if you want earlier access our to sell my work. Category: Creatures
Keychain series: Castlevania! Do not size down the keychains! The holes will be too small. Two sizes of the moon keychain are available for this reason. Attach this decoration to a clip using jump rings, then show it off anywhere you go!…
Guaranteed to kill vampires It's made in parts that can be swapped-out as I flush-out this design. The HOLDER parts are meant to hold a recoiler (that acts as the whip). I am currently utilizing the Vulcan spring Minivs and the Thin Disk…
Great high-quality original model. Shrunk 1/5th of the size with an added keyhole loop at the top. Removed text from the original model and extruded to 3mm width. Shrunk to 50mm diameter to match the angle keychain found here:…
Star Map stand for Revan Mask. Also I added the files without the stand set up to print as a standalone star map. There is also a .stp file for the coupling so you can create a stand for something that isn't the revan mask. You must print…
Alucard's alternate equip seen in various fights across season 2 of Netflix's Castlevania Nocturne show. BladeFull x 1 OR BladeHalfA x 1 and BladeHalfB x 1 HiltFull x 1 OR HiltHalf x 2 AlignmentPin x 4 if using the half models. You will…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 116.71x175mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm…
A Castlevania Cyclops. You can go to https://www.patreon.com/Schlossbauer if you want earlier access our to sell my work. Category: Creatures
Only a split version is available, due to the many details and complexity of printing. I recommend printing supports from PVA, or if using PLA, use supports from PETG I do comprehensive 3D scanning and you can see some of my results here.…
Can be found here as a free .PDO upload https://www.onekura.com/
We designed a small field kit box with snap closure. In World War II fashion a labell on the kit discribes it's purpose. I use 1.2mm x 31.8mm Wire Brads to secure the hinge.
Pieza repuesto de devanador de levanta cristales de puertas para vw gol power.
I made some custom modifications to the original design to better suit my needs. I shortened the support "pole" to reduce its height, and I redesigned the base to make it hexagonal. Additionally, I added the NERV and SEELE logos to give…
Revan's sabers, hilts only. Not any specific printing requirements, needs, whatever. Should be good to print as is with most settings. If you have any requests, feel free to send me a DM.
A Castlevania Marionette. You can go to https://www.patreon.com/Schlossbauer if you want earlier access our to sell my work. Category: Creatures
A Castlevania Man Eater. You can go to https://www.patreon.com/Schlossbauer if you want earlier access our to sell my work. Category: Creatures
I designed Revan for some gamers, who would like a lightweight wireless gaming mouse. Revan is printed in ABS with 0.2 layer height. For more information please check the first Version. I made just some important adjustments: Better…
My first upload, hope you all like it! I used Hueforge to create this retro style filament painting of Unit 02 piloted by Asuka from the Anime "Evangelion". Working on Units 00, 01, and 03 next. Follow me to keep up to date.…
Vom Fan für Fans! Neon Genesis Evangelion Schlüsselanhänger “NERV” in der Version 2. Der Schlüsselanhänger kann am besten mit einem AMS gedruckt werden, wenn du kein AMS hast, solltest du eine Pause im Slicer einbauen und den…
Student 3D designer chasing a dream. I don't own a printer yet, but every like and download truly helps. Thank you! All❤
Castlevania Mandragoras. You can go to https://www.patreon.com/Schlossbauer if you want earlier access our to sell my work. Category: Creatures
A Castlevania Dryad. You can go to https://www.patreon.com/Schlossbauer if you want earlier access our to sell my work. Category: Toys & Games
