Counting matching models…
This is exactly what it looks like. I recommend printing this model with a tall layer height (0.2 or higher) so the print feels like a topographical map. If my calculations are correct, each layer on a .2 layer height print represents…
I recommend printing perpendicular to the printing plate, it will preserve more details and the layers are not so visible, at a low layer the time is longer, but the details are more beautiful. So far, the print with Pla Prusament silver…
karoseria: infill 5% perimeter 2 ostatne diely: infill 20% Perimeter 2 šroby 3,5x15 4ks
3D model created from the following heightmap: https://manticorp.github.io/unrealheightmap/#latitude/27.984700118612693/longitude/86.923828125/zoom/10/outputzoom/15/width/16258/height/4033 Imported into blender and mapped to a divided…
3D topography map of Mount Everest. Scaled by 2x with round base.
TinyMtn Free Pack 11 - Himalayas This is a package with sets of 3D model files for four high mountains in the Khumbu Himal. Everest / Lhotse, 8849 m / 29,032 ft Kangchenjunga, 8586 m / 28,169 ft Makalu, 8485 m / 27,838 ft Cho Oyu, 8188 m…
Print on .15mm layer height for better detail and use tree supports. For better size I would recommend downsizing to 45%. Enjoy! Check out the rest of my Paw Patrol models!
This is Everest from Paw Patrol. Printed at 0,2mm Layers the row of colours are: 2x DasFilament Tonweiß (Cremewhite) OWL Blaulila (violette) Fillamentum Peppered Mustard (yellow) Fillamentum Vertigo Jade (green) 3DJake Pastell grün (mint)…
I needed some of these plastic clips spacers (anti crabbing clips) for my old Everest secondary glazing windows but could not find them online. So lets print them
Designed these to fit in the cd player slot of a t6 Ford Ranger and Everest. Could fit more vehicles but I am unable to test. There are two versions a double and single. Fit most cellphone brackets that have the ball mechanism. -Added…
This Ranger & Everest Change Tray. It didn't come with the vehicle, so I created one. It fits in snugly with some compression ‘fins’ to fit tight so it stays in securely. I added a ring of thicker material at the bottom to keep it from…
Redcat Gen7 Crawler Servo Mount. It has two servo mounting positions: 1st holes are for the stock location with stock servo horn 2nd set of holes is Higher for a longer aftermarket servo horn Want More Free Designs? Like and Comment! If…
Holder for a 15 Button Stream Deck MK1 to a mountain.gg Everest keyboard . An evolution or improvement of my previous mounting bracket model that relied on small magnets and was overall kind of useless as it turned out after a bit of use.…
this detailed body is the right wheelbase for the rc you will have to cut the fender out. Have Fun!
Here is a simple four-piece adventure rack for the bed of a stock Redcat Everest 10 RC crawler. Attach the pieces together with some small lengths of wire and glue. Do not use brittle filament for this project as this rack may take a hit…
Cookie cutter with Everest from Paw Patrol design! The cutter is made in 3 pieces, one cuts the contour easily, the stamp makes it easy to get the inner drawing of the cookie and the pin helps to use the stamp. Best to print with PETG,…
This is the first puzzle in a series that uses 3D data and patterns. If you’re interested in my design work, be sure to follow me for updates on future projects! About the Puzzle While I designed the 3D model, the geographical data was…
I have designed a set of clips for the following vehicle's tow hitch brackets. Ford Wildtrak Ford Everest The clips may work with other models, but I have not tested beyond the above-listed ones. The clips may be attached to the provided…
These brackets are meant to mount a 15 Button Stream Deck to a mountain.gg Everest keyboard, slotting into the led bar gap on the back, also having the option to insert small magnets for the magnet bar which is typically meant for the…
A 3d topographic model of Mount Everest, the highest mountain in the world. Scaled topographic model. Printed in 3 parts, the display box, the map itself and then a nameplate (pause printing and change colour to create contrast - or use…
Mountin Mount Everest in nepal next to it its a Lhotse
Mount Everest Wall Print. Printed with the following params: 0.4 nozel 0.2 layer height
chassis new design with conversion for 313mm and new battery tray plus electronic tray. Bumper mounts for custom bumpers that I will make or you can! also will make body mounts for it too or you can! Thanks and happy printing
This is a 3D model of Mount Everest, at 1:250'000. It measures 6.0 × 4.0 × 1.9 cm and covers real terrain between 4853 and 8848 m above sea level — heights are at true scale, with no vertical exaggeration. WHAT'S IN IT - Terrain from…
This highly detailed 3D model of Mount Everest captures the iconic peak’s topography with precision. Perfect for educational purposes, geography enthusiasts, or as a unique display piece. Designed for easy 3D printing with optimized mesh…
Everest Paw Patrol Hi-Res A cute figurine of Everest from Paw Patrol , sitting in a relaxed pose. She wears her signature winter hat and rescue outfit with a small backpack. -Use caution when scaling-
I designed this 45 Record Adapter in Fusion 360 for the Printables 45 Record Adapters contest (10/03/2023). It is a remix of the wonderful mini mountain models designed by Simon.…
Here is a bracket for mounting the Traxxas 3628 waterproof receiver box to the Redcat Everest 10 using existing holes. This is very nice if you like to drive your crawler in wet environments. Here is an Amazon link to the receiver box I…
Filler ring for around GAMMA Everest afdekplaat afdekraam. (Wall Outlets) Sizes : Single, Duo, Triple We bought these outlets, but later discovered they have an strange design on the bottom, keeping a gap open. Where unsure if this is…
paw patrol everest keychain scale possible / paint as u like
Everest Mountain Wall Art
Bring the world’s highest peak to your desk. This precision-crafted topographic model of Mount Everest features clean elevation layers, a bold summit pin, and a sleek base engraved with “EVEREST.” Designed for visual impact and print…
this is a link that doesn't hit the diff cover nearly as much! Have fun!! credit to Rob Beast for the make photo MRC Please show a make of it!!
I have always been fascinated by the way topography prints with FDM printers and I wanted to create something useful so I designed this simple stand for postcard or pictures out of the topography of Mt Everest. Nothing fancy in terms of…
easy to print Enjoy!
Here is a very basic model of the stock spring preload spacers from the Redcat Everest 10. You can use your slicer software to adjust the height to create custom parts for adjusting spring force and ride height on your crawler.
I modded my RedCat Everest 10 to be able to put just about any standard 313-324 wheelbase body on. I got the plans from here: http://www.rccrawler.com/forum/redcat-crawlers/593465-e10-deadbolt.html#post5781723 But I needed some spacers…
SKYLINE captures these one-of-a-kind vistas, transforming them into a tangible representation of a city's facts of life, its character, and its collective memory. It is more than just decor; it is a physical manifestation of the stories…
Introducing my debut 3D model - a meticulously crafted replica of the majestic Mount Everest! I’ve poured my passion for modeling into this project and I’m excited to share it with you. Your download would mean the world to me.
This is a 3D model of Mount Everest, at 1:100'000. It measures 10.0 × 10.0 × 3.9 cm and covers real terrain between 5171 and 8848 m above sea level — heights are at true scale, with no vertical exaggeration. WHAT'S IN IT - Terrain from…
Napkin holder for size 120x120mm
I had an issue where my battery slid back into the spur gear and wore a groove into the battery and shaved down the teeth of the spur gear. So i designed this simple cover. enjoy PS: there's no mounting holes, I just glued it in place…
Feet and card holder for Everest K2 typewriter. I printed the card holder with a resin printer in clear resin, and the feet on a filament printer with tpu. The card holder I had to "paint" with resin after curing and then cure again to…
This is a small project I used to highlight a technique in PrusaSlicer for printing only the intersection of two objects. In this case, it is a text that shows the topography of Mt. Everest and the surrounding mountains on its top. The…
I created this model while teaching myself some CAD?....CADing?.....eh whatever..... I just hope someone gets some use out of it.
A topographic jigsaw puzzle featuring Mount Everest and the surrounding Himalayan peaks, created from real-world terrain data. The assembled puzzle forms a 3D mountain landscape for geography lessons or display. Designed to print without…
A mount for a Stream Deck Mini to slide onto the back of the Everest Max
This is a faithful scale reproduction of Mount Everest, created using Open Topography data. As you can see, the model takes up little space and can easily be placed on a table. I'm building an entire shelf to display all the reliefs I…
Printing Mount Everest properly Everest is the first thing almost everyone makes on a terrain generator, and most of the results are disappointing. Here is why, and how to get one worth putting on a shelf. The problem with printing…
Sick of not having enough space for cups and bottles? Here’s the solution for you! This is a bigger and safer drip tray for the Soft Star Everest water dispenser ( Old version ). It provides extra room for larger bottles and mugs that…
Colormix of Aidan's Everest model to show topography. Two versions are included, both using 5 colors with 10 mixes for a total of 15 colors. Core One+ MMU3 Core One+ INDX 8T
A mount for a Stream Deck Mini to slide onto the back of the Everest Max
